{"title":"ATV \u0026 UTV Tool Boxes","description":"\u003cp\u003eCrossbed and cargo boxes sized for side-by-sides and ATVs.\u003c\/p\u003e","products":[{"product_id":"uws-59-in-utv-crossbed-tool-box-matte-black-aluminum-3-2-cu-ft-can-am-defender-brackets-8500002","title":"UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum, 3.2ft³, Can-Am Defender Brackets (8500002)","description":"\u003cp\u003eThe UWS 59\" UTV Crossbed Tool Box runs across the front of a side-by-side bed and gives you 3.2ft³ of locked, sealed storage while leaving the rest of the load floor clear. It is 59.75\" across, only 12.25\" deep and 10.25\" tall, which is the shape that makes it work: it takes the strip of bed you were not really using and turns it into somewhere chainsaw kit, straps, fencing tools or a couple of cases can live. This part number ships with the vehicle-specific bracket kit for Can-Am Defender, so the box bolts down to the machine rather than sitting loose. The tub is aluminum welded into a single piece in the USA and finished in matte black powder coat, which stays glare-free across the hood. The lid carries UWS's patented RigidCore foam-filled construction so it does not flex or warp, and a MicroSeal gasket runs the lid seam to keep out the water and fine grit that get into everything on a trail machine. A recessed key-operated stainless steel paddle handle locks it. Empty weight is 27.6 lb, and this SKU ships by freight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum\u003c\/li\u003e\n\u003cli\u003eTwo keys (UWS install sheet Parts List for this box: 1 UTV tool box, 2 keys)\u003c\/li\u003e\n\u003cli\u003eMicroSeal gasket, factory-fitted around the lid seam\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting hardware kit for Can-Am Defender: 2 turnbuckle brackets, 4 turnbuckles, 4 hex bolts 5\/16\"-18 x 1\", 8 flat washers, 4 nylock nuts\u003c\/li\u003e\n\u003cli\u003eUWS installation manual\u003c\/li\u003e\n\u003cli\u003eUWS limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cKLCkUufXFM\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3.2ft³ Across the Bed of the Side-by-Side\u003c\/strong\u003e\u003cbr\u003eThe box runs 59.75\" across the UTV bed, stands only 10.25\" tall and is just 12.25\" deep, so it takes the front strip of the bed and leaves the rest of the load floor clear. UWS rates the interior at 3.2ft³, which is enough for chainsaw kit, tow straps, fencing tools or a couple of rifle cases without eating the space you actually haul in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle-Specific Brackets Included\u003c\/strong\u003e\u003cbr\u003eThis SKU ships with the mounting bracket kit for Can-Am Defender, so the box bolts to the bed of the machine rather than sitting loose or being strapped down. UWS lists it as a fit for certain model years only, so check your machine against the UWS application guide before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented RigidCore Lid and MicroSeal Gasket\u003c\/strong\u003e\u003cbr\u003eThe lid uses the same patented RigidCore construction as UWS's truck boxes, with hardening foam pressed between two aluminum plates so it does not flex or warp, and a MicroSeal gasket runs the lid seam to keep out dust, water and the fine grit that gets into everything on a trail machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelded Aluminum Tub, Powder Coated Matte Black\u003c\/strong\u003e\u003cbr\u003eThe tub is aluminum, welded into a single piece in the USA, and finished in matte black powder coat. Matte black is the practical choice on a UTV: it does not throw glare back at you across the hood, and the powder coat adds corrosion resistance on top of what aluminum already gives you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey-Operated Stainless Steel Paddle Handle\u003c\/strong\u003e\u003cbr\u003eA recessed stainless steel paddle handle keeps the box locked and keeps the latch out of the way of shins and cargo. Stainless matters here because a UTV box spends its life wet and muddy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips Freight\u003c\/strong\u003e\u003cbr\u003eThis SKU ships by freight (LTL), which suits a box this size going to a shop or a yard. UWS also sells the identical box in heavy parcel packaging under a different part number if a freight delivery is awkward for you.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCan-Am Defender\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, on certain model years. UWS lists this SKU for the Can-Am Defender; confirm your machine and year against the UWS application guide before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eOther side-by-side models\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Only with the correct UWS bracket kit for that machine. The box itself is common across the range; the brackets are what make it vehicle-specific.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eATVs and four-wheelers\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. This is a crossbed box for a side-by-side bed. UWS builds the ATV box for rack mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003ePickup truck beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. At 59.75\" long and 12.25\" deep this box is proportioned for a UTV bed and has no truck bed-rail mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eBrackets\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Included in this carton.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e This is a UTV crossbed box. It mounts down in the bed of a side-by-side with vehicle-specific brackets, and it is not a truck bed-rail box: there is nothing on it that clamps to a pickup bed rail, and the 59.75\" x 12.25\" x 10.25\" proportions are wrong for a truck. UWS publishes fitment by machine and model year in its application guide and states only that this SKU suits certain years, so treat the application named here as the starting point and verify the year against UWS before you order. The bracket kit for that application is in the carton.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUWS Part Number:\u003c\/b\u003e 8500002\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e UTV crossbed tool box\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Aluminum diamond plate, welded single-piece tub\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Length:\u003c\/b\u003e 59.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Width:\u003c\/b\u003e 12.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Height:\u003c\/b\u003e 10.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Length:\u003c\/b\u003e 52\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Width:\u003c\/b\u003e 11.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Height:\u003c\/b\u003e 4.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage Capacity:\u003c\/b\u003e 3.2ft³\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Style:\u003c\/b\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Standard Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLid Type:\u003c\/b\u003e Single Lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch Type:\u003c\/b\u003e Key-operated stainless steel paddle handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarrying Handles:\u003c\/b\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight:\u003c\/b\u003e 27.6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 36.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Method:\u003c\/b\u003e Freight (LTL) only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation Difficulty:\u003c\/b\u003e Easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 672078082464\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime, with one year on the finish and one year on the parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the UTV bed with the supplied vehicle-specific brackets  ·  \u003cb\u003eTime:\u003c\/b\u003e About 45 minutes to an hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket and wrench set, drill and the bit size called out on the bracket sheet where the application requires drilling  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Easy to intermediate, DIY-friendly\u003c\/p\u003e\n\u003cp\u003eCheck your machine's model year against the UWS application guide before you start, because the bracket kit is cut for specific years. Offer the box up and locate the brackets before drilling anything, then check the lid opens fully and clears the cab, the roll cage and any rear seat before you tighten everything down. Re-check the fasteners after the first few hours of use; a UTV shakes bolts loose faster than a truck does.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum, 3.2ft³, Can-Am Defender Brackets, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-uws-group-4505f8d7-installation-manual.pdf?v=1785333155\" target=\"_blank\" rel=\"noopener\" title=\"Download the UWS installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eUWS UTV Tool Box Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e UWS limited lifetime warranty on the box, with one year on the finish and one year on the parts. The warranty covers defects in materials and workmanship; it does not cover damage from overloading, misuse, accident or improper installation, and it does not cover normal wear on the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout UWS\u003c\/h3\u003e\n\u003cp\u003eUWS is short for United Welding Services, and the name is the point: every UWS box starts as flat aluminum sheet and is welded into a single-piece tub rather than riveted or folded together. The company builds at its own plant in Perry, Florida, and it has been supplying the truck accessory trade long enough that the diamond plate box with the blue UWS badge is a familiar sight on job sites. UWS is part of the CURT Group, which in turn belongs to Lippert, so behind a fairly specialized Florida welding shop sits a full national parts and warranty network.\u003c\/p\u003e\n\u003cp\u003eTwo pieces of engineering separate a UWS box from a generic aluminum one. The first is the patented RigidCore lid: instead of a hollow shell, the lid is a pair of aluminum plates completely filled with a hardening, expanding foam, which sets into a solid structure and stops the lid bending, warping or binding after a few years of being leaned on. The second is the MicroSeal gasket, which lines the entire seam where the lid meets the tub and keeps water, dust, grit and insects out of the box rather than merely slowing them down. Both are backed by a limited lifetime warranty on the box, with one year on the finish and one year on the parts.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized UWS dealer. Every box we ship is new, in the original UWS carton, built in the USA, and covered by the full UWS factory warranty.\u003c\/p\u003e","brand":"UWS","offers":[{"title":"Default Title","offer_id":48935461847284,"sku":"UWS8500002","price":727.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-8500002-59-in-utv-crossbed-tool-box-hero-front-three-quarter_2afe4942-1387-43b6-aecb-444057ee1897.webp?v=1785337391"},{"product_id":"uws-32-in-atv-tool-box-bright-aluminum-2-7-cu-ft-atv","title":"UWS 32\" ATV Tool Box, Bright Aluminum, 2.7ft³ (ATV)","description":"\u003cp\u003eThe UWS 32\" ATV Tool Box is a bright aluminum diamond plate box sized for the cargo rack of a four-wheeler, 33\" long, 13\" wide and 13.25\" tall, giving 2.7ft³ of lockable storage for the tools and gear you would otherwise bungee down and hope for the best with. At 17 lb empty it is light enough for one person to lift on and off, and folding handles on both ends make that easy. The tub is extra-thick, corrosion-resistant aluminum welded into a single piece, and the lid uses UWS's patented RigidCore construction, two aluminum plates completely filled with a hardening foam, which is what keeps a lid this size flat on a machine that vibrates and twists all day. A MicroSeal gasket runs the lid seam against grime and moisture, and a key-operated stainless steel paddle handle locks it. UWS designs, fabricates and welds it in Florida. Mounting hardware is not supplied, because rack patterns vary from machine to machine. This SKU ships by freight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne UWS 32\" ATV Tool Box, Bright Aluminum\u003c\/li\u003e\n\u003cli\u003eKeys for the locking handle\u003c\/li\u003e\n\u003cli\u003eMicroSeal gasket, factory-fitted around the lid seam\u003c\/li\u003e\n\u003cli\u003eFolding carrying handles on both ends\u003c\/li\u003e\n\u003cli\u003eUWS limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cKLCkUufXFM\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2.7ft³ on the Back of a Four-Wheeler\u003c\/strong\u003e\u003cbr\u003eThe ATV is 33\" long, 13\" deep and 13.25\" tall, giving 2.7ft³ of lockable storage that straps down to an ATV rear rack, a UTV bed or a trailer. At 17 lb it is light enough that one person can lift it on and off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented RigidCore Foam-Filled Lid\u003c\/strong\u003e\u003cbr\u003eThe lid is two aluminum plates completely filled with a hardening foam, UWS's patented RigidCore construction. On a machine that vibrates and twists all day, a lid that stays flat is the difference between a box that keeps sealing and one that does not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroSeal Gasket and a Locking Stainless Handle\u003c\/strong\u003e\u003cbr\u003eA MicroSeal gasket runs the lid seam to keep grime and moisture out, and a key-operated stainless steel paddle handle locks the box. Folding carrying handles on the ends make it easy to move once it is loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelded Aluminum, Built in Florida\u003c\/strong\u003e\u003cbr\u003eThe tub is extra-thick, corrosion-resistant aluminum welded into one piece. UWS designs, fabricates and welds it in Florida, and backs it with a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips Freight\u003c\/strong\u003e\u003cbr\u003eThis SKU ships freight (LTL). UWS also sells the identical box heavily packaged for parcel carriers under a different part number.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eATV front and rear cargo racks\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, this is the intended use. The box is 33\" by 13\" and straps or bolts down to the rack.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eUTV and side-by-side beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, as a free-standing or strapped-down box. UWS builds dedicated crossbed and side-mount boxes if you want one bolted in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTrailers, sleds and workshop use\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes. It is a self-contained lockable box and needs nothing more than a flat surface to sit on.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003ePickup truck beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Usable as a small free-standing chest, but at 33\" long it is much smaller than a truck chest box and has no bed-rail mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eMounting hardware\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e Not included. Rack mounting varies by machine, so UWS supplies the box only.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e This is an ATV box, sized for a four-wheeler's cargo rack rather than a truck bed: 33\" long, 13\" deep, 13.25\" tall and 17 lb empty, with folding carrying handles so one person can lift it on and off. It is not a truck bed-rail box and carries no bed-rail mounting. UWS does not supply rack hardware because rack patterns differ from machine to machine, so plan on ratchet straps or your own bolts through the rack.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUWS Part Number:\u003c\/b\u003e ATV\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e ATV tool box\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Aluminum diamond plate, welded single-piece tub\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Bright aluminum diamond plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Length:\u003c\/b\u003e 33\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Width:\u003c\/b\u003e 13\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Height:\u003c\/b\u003e 13.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Length:\u003c\/b\u003e 32\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Width:\u003c\/b\u003e 12\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage Capacity:\u003c\/b\u003e 2.7ft³\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Style:\u003c\/b\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Standard Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLid Type:\u003c\/b\u003e Single Lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch Type:\u003c\/b\u003e Key-operated stainless steel paddle handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarrying Handles:\u003c\/b\u003e Yes, folding end handles\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight:\u003c\/b\u003e 17 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 20 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Method:\u003c\/b\u003e Freight (LTL) only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation Difficulty:\u003c\/b\u003e Easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 672078010023\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime, with one year on the finish and one year on the parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Free-standing in the truck bed, on a flatbed or in the shop; no vehicle-specific mounting kit required  ·  \u003cb\u003eTime:\u003c\/b\u003e About 10 minutes  ·  \u003cb\u003eTools:\u003c\/b\u003e A tape measure, and a second person for the lift at 17 lb  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Easy, no drilling required\u003c\/p\u003e\n\u003cp\u003eA chest box does not bolt to the bed rails; it sits on the bed floor, normally pushed forward against the bulkhead where the bed is widest. Measure your bed before ordering: this box is 33\" long, and beds are narrower between the wheel wells than at the bulkhead. Once it is in, secure it. An unsecured chest will slide forward under heavy braking, so run straps to the bed's tie-down points or bolt it down. If you are running a bed liner, remember it takes an inch or so off every internal measurement.\u003c\/p\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e UWS limited lifetime warranty on the box, with one year on the finish and one year on the parts. The warranty covers defects in materials and workmanship; it does not cover damage from overloading, misuse, accident or improper installation, and it does not cover normal wear on the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout UWS\u003c\/h3\u003e\n\u003cp\u003eUWS is short for United Welding Services, and the name is the point: every UWS box starts as flat aluminum sheet and is welded into a single-piece tub rather than riveted or folded together. The company builds at its own plant in Perry, Florida, and it has been supplying the truck accessory trade long enough that the diamond plate box with the blue UWS badge is a familiar sight on job sites. UWS is part of the CURT Group, which in turn belongs to Lippert, so behind a fairly specialized Florida welding shop sits a full national parts and warranty network.\u003c\/p\u003e\n\u003cp\u003eTwo pieces of engineering separate a UWS box from a generic aluminum one. The first is the patented RigidCore lid: instead of a hollow shell, the lid is a pair of aluminum plates completely filled with a hardening, expanding foam, which sets into a solid structure and stops the lid bending, warping or binding after a few years of being leaned on. The second is the MicroSeal gasket, which lines the entire seam where the lid meets the tub and keeps water, dust, grit and insects out of the box rather than merely slowing them down. Both are backed by a limited lifetime warranty on the box, with one year on the finish and one year on the parts.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized UWS dealer. Every box we ship is new, in the original UWS carton, built in the USA, and covered by the full UWS factory warranty.\u003c\/p\u003e","brand":"UWS","offers":[{"title":"Default Title","offer_id":48935465910516,"sku":"UWSATV","price":367.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-atv-32-in-atv-tool-box-hero-front-three-quarter.jpg?v=1785298305"},{"product_id":"uws-32-in-atv-tool-box-gloss-black-aluminum-2-7-cu-ft-atv-blk","title":"UWS 32\" ATV Tool Box, Gloss Black Aluminum, 2.7ft³ (ATV-BLK)","description":"\u003cp\u003eThe UWS 32\" ATV Tool Box is a gloss black powder coat over aluminum diamond plate box sized for the cargo rack of a four-wheeler, 33\" long, 13\" wide and 13.25\" tall, giving 2.7ft³ of lockable storage for the tools and gear you would otherwise bungee down and hope for the best with. At 17.4 lb empty it is light enough for one person to lift on and off, and folding handles on both ends make that easy. The tub is extra-thick, corrosion-resistant aluminum welded into a single piece, and the lid uses UWS's patented RigidCore construction, two aluminum plates completely filled with a hardening foam, which is what keeps a lid this size flat on a machine that vibrates and twists all day. A MicroSeal gasket runs the lid seam against grime and moisture, and a key-operated stainless steel paddle handle locks it. UWS designs, fabricates and welds it in Florida. Mounting hardware is not supplied, because rack patterns vary from machine to machine. This SKU ships by freight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne UWS 32\" ATV Tool Box, Gloss Black Aluminum\u003c\/li\u003e\n\u003cli\u003eKeys for the locking handle\u003c\/li\u003e\n\u003cli\u003eMicroSeal gasket, factory-fitted around the lid seam\u003c\/li\u003e\n\u003cli\u003eFolding carrying handles on both ends\u003c\/li\u003e\n\u003cli\u003eUWS limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cKLCkUufXFM\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2.7ft³ on the Back of a Four-Wheeler\u003c\/strong\u003e\u003cbr\u003eThe ATV-BLK is 33\" long, 13\" deep and 13.25\" tall, giving 2.7ft³ of lockable storage that straps down to an ATV rear rack, a UTV bed or a trailer. At 17.4 lb it is light enough that one person can lift it on and off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented RigidCore Foam-Filled Lid\u003c\/strong\u003e\u003cbr\u003eThe lid is two aluminum plates completely filled with a hardening foam, UWS's patented RigidCore construction. On a machine that vibrates and twists all day, a lid that stays flat is the difference between a box that keeps sealing and one that does not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroSeal Gasket and a Locking Stainless Handle\u003c\/strong\u003e\u003cbr\u003eA MicroSeal gasket runs the lid seam to keep grime and moisture out, and a key-operated stainless steel paddle handle locks the box. Folding carrying handles on the ends make it easy to move once it is loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelded Aluminum, Built in Florida\u003c\/strong\u003e\u003cbr\u003eThe tub is extra-thick, corrosion-resistant aluminum welded into one piece. UWS designs, fabricates and welds it in Florida, and backs it with a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips Freight\u003c\/strong\u003e\u003cbr\u003eThis SKU ships freight (LTL). UWS also sells the identical box heavily packaged for parcel carriers under a different part number.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eATV front and rear cargo racks\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, this is the intended use. The box is 33\" by 13\" and straps or bolts down to the rack.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eUTV and side-by-side beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, as a free-standing or strapped-down box. UWS builds dedicated crossbed and side-mount boxes if you want one bolted in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTrailers, sleds and workshop use\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes. It is a self-contained lockable box and needs nothing more than a flat surface to sit on.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003ePickup truck beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Usable as a small free-standing chest, but at 33\" long it is much smaller than a truck chest box and has no bed-rail mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eMounting hardware\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e Not included. Rack mounting varies by machine, so UWS supplies the box only.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e This is an ATV box, sized for a four-wheeler's cargo rack rather than a truck bed: 33\" long, 13\" deep, 13.25\" tall and 17.4 lb empty, with folding carrying handles so one person can lift it on and off. It is not a truck bed-rail box and carries no bed-rail mounting. UWS does not supply rack hardware because rack patterns differ from machine to machine, so plan on ratchet straps or your own bolts through the rack.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUWS Part Number:\u003c\/b\u003e ATV-BLK\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e ATV tool box\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Aluminum diamond plate, welded single-piece tub\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Gloss black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Length:\u003c\/b\u003e 33\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Width:\u003c\/b\u003e 13\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Height:\u003c\/b\u003e 13.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Length:\u003c\/b\u003e 32\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Width:\u003c\/b\u003e 12\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage Capacity:\u003c\/b\u003e 2.7ft³\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Style:\u003c\/b\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Standard Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLid Type:\u003c\/b\u003e Single Lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch Type:\u003c\/b\u003e Key-operated stainless steel paddle handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarrying Handles:\u003c\/b\u003e Yes, folding end handles\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight:\u003c\/b\u003e 17.4 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 20 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Method:\u003c\/b\u003e Freight (LTL) only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation Difficulty:\u003c\/b\u003e Easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 672078010511\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime, with one year on the finish and one year on the parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Free-standing in the truck bed, on a flatbed or in the shop; no vehicle-specific mounting kit required  ·  \u003cb\u003eTime:\u003c\/b\u003e About 10 minutes  ·  \u003cb\u003eTools:\u003c\/b\u003e A tape measure, and a second person for the lift at 17.4 lb  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Easy, no drilling required\u003c\/p\u003e\n\u003cp\u003eA chest box does not bolt to the bed rails; it sits on the bed floor, normally pushed forward against the bulkhead where the bed is widest. Measure your bed before ordering: this box is 33\" long, and beds are narrower between the wheel wells than at the bulkhead. Once it is in, secure it. An unsecured chest will slide forward under heavy braking, so run straps to the bed's tie-down points or bolt it down. If you are running a bed liner, remember it takes an inch or so off every internal measurement.\u003c\/p\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e UWS limited lifetime warranty on the box, with one year on the finish and one year on the parts. The warranty covers defects in materials and workmanship; it does not cover damage from overloading, misuse, accident or improper installation, and it does not cover normal wear on the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout UWS\u003c\/h3\u003e\n\u003cp\u003eUWS is short for United Welding Services, and the name is the point: every UWS box starts as flat aluminum sheet and is welded into a single-piece tub rather than riveted or folded together. The company builds at its own plant in Perry, Florida, and it has been supplying the truck accessory trade long enough that the diamond plate box with the blue UWS badge is a familiar sight on job sites. UWS is part of the CURT Group, which in turn belongs to Lippert, so behind a fairly specialized Florida welding shop sits a full national parts and warranty network.\u003c\/p\u003e\n\u003cp\u003eTwo pieces of engineering separate a UWS box from a generic aluminum one. The first is the patented RigidCore lid: instead of a hollow shell, the lid is a pair of aluminum plates completely filled with a hardening, expanding foam, which sets into a solid structure and stops the lid bending, warping or binding after a few years of being leaned on. The second is the MicroSeal gasket, which lines the entire seam where the lid meets the tub and keeps water, dust, grit and insects out of the box rather than merely slowing them down. Both are backed by a limited lifetime warranty on the box, with one year on the finish and one year on the parts.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized UWS dealer. Every box we ship is new, in the original UWS carton, built in the USA, and covered by the full UWS factory warranty.\u003c\/p\u003e","brand":"UWS","offers":[{"title":"Default Title","offer_id":48935467647220,"sku":"UWSATV-BLK","price":437.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-atv-blk-32-in-atv-tool-box-hero-front-three-quarter.jpg?v=1785298322"},{"product_id":"uws-59-in-utv-crossbed-tool-box-matte-black-aluminum-3-2-cu-ft-box-only-utv-59-mb","title":"UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum, 3.2ft³, Box Only (UTV-59-MB)","description":"\u003cp\u003eThe UWS 59\" UTV Crossbed Tool Box runs across the front of a side-by-side bed and gives you 3.2ft³ of locked, sealed storage while leaving the rest of the load floor clear. It is 59.75\" across, only 12.25\" deep and 10.25\" tall, which is the shape that makes it work: it takes the strip of bed you were not really using and turns it into somewhere chainsaw kit, straps, fencing tools or a couple of cases can live. This part number is the box on its own, without brackets: UWS builds it to mount with vehicle-specific brackets, but the kit is not in this carton and has to be ordered separately for your machine. The tub is aluminum welded into a single piece in the USA and finished in matte black powder coat, which stays glare-free across the hood. The lid carries UWS's patented RigidCore foam-filled construction so it does not flex or warp, and a MicroSeal gasket runs the lid seam to keep out the water and fine grit that get into everything on a trail machine. A recessed key-operated stainless steel paddle handle locks it. Empty weight is 27.6 lb, and this SKU ships by freight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum\u003c\/li\u003e\n\u003cli\u003eTwo keys (UWS install sheet Parts List for this box: 1 UTV tool box, 2 keys)\u003c\/li\u003e\n\u003cli\u003eMicroSeal gasket, factory-fitted around the lid seam\u003c\/li\u003e\n\u003cli\u003eMounting brackets and hardware are NOT included with this part number. UWS publishes the bare box sheet under UTV-59-MB and its Parts List reads: 1 UTV tool box, 2 keys, with a note that vehicle-specific hardware comes in kits sold separately\u003c\/li\u003e\n\u003cli\u003eUWS installation manual\u003c\/li\u003e\n\u003cli\u003eUWS limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cKLCkUufXFM\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3.2ft³ Across the Bed of the Side-by-Side\u003c\/strong\u003e\u003cbr\u003eThe box runs 59.75\" across the UTV bed, stands only 10.25\" tall and is just 12.25\" deep, so it takes the front strip of the bed and leaves the rest of the load floor clear. UWS rates the interior at 3.2ft³, which is enough for chainsaw kit, tow straps, fencing tools or a couple of rifle cases without eating the space you actually haul in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Vehicle-Specific Brackets, Sold Separately\u003c\/strong\u003e\u003cbr\u003eThis is the bare box. It is built to mount with UWS vehicle-specific brackets, but the bracket kit is not in the carton and has to be ordered separately for your machine. If you want the box and the brackets together, buy the bracketed SKU for your application instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented RigidCore Lid and MicroSeal Gasket\u003c\/strong\u003e\u003cbr\u003eThe lid uses the same patented RigidCore construction as UWS's truck boxes, with hardening foam pressed between two aluminum plates so it does not flex or warp, and a MicroSeal gasket runs the lid seam to keep out dust, water and the fine grit that gets into everything on a trail machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelded Aluminum Tub, Powder Coated Matte Black\u003c\/strong\u003e\u003cbr\u003eThe tub is aluminum, welded into a single piece in the USA, and finished in matte black powder coat. Matte black is the practical choice on a UTV: it does not throw glare back at you across the hood, and the powder coat adds corrosion resistance on top of what aluminum already gives you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey-Operated Stainless Steel Paddle Handle\u003c\/strong\u003e\u003cbr\u003eA recessed stainless steel paddle handle keeps the box locked and keeps the latch out of the way of shins and cargo. Stainless matters here because a UTV box spends its life wet and muddy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips Freight\u003c\/strong\u003e\u003cbr\u003eThis SKU ships by freight (LTL), which suits a box this size going to a shop or a yard. UWS also sells the identical box in heavy parcel packaging under a different part number if a freight delivery is awkward for you.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eThe listed UTV application\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e This is the base box with no application-specific bracket kit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eOther side-by-side models\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Only with the correct UWS bracket kit for that machine. The box itself is common across the range; the brackets are what make it vehicle-specific.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eATVs and four-wheelers\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. This is a crossbed box for a side-by-side bed. UWS builds the ATV box for rack mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003ePickup truck beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. At 59.75\" long and 12.25\" deep this box is proportioned for a UTV bed and has no truck bed-rail mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eBrackets\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e NOT included with this part number. Order the bracket kit for your machine separately, or buy the bracketed SKU.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e This is a UTV crossbed box. It mounts down in the bed of a side-by-side with vehicle-specific brackets, and it is not a truck bed-rail box: there is nothing on it that clamps to a pickup bed rail, and the 59.75\" x 12.25\" x 10.25\" proportions are wrong for a truck. UWS publishes fitment by machine and model year in its application guide and states only that this SKU suits certain years, so treat the application named here as the starting point and verify the year against UWS before you order. No bracket kit is in this carton.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUWS Part Number:\u003c\/b\u003e UTV-59-MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e UTV crossbed tool box\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Aluminum diamond plate, welded single-piece tub\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Length:\u003c\/b\u003e 59.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Width:\u003c\/b\u003e 12.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Height:\u003c\/b\u003e 10.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Length:\u003c\/b\u003e 52\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Width:\u003c\/b\u003e 11.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Height:\u003c\/b\u003e 4.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage Capacity:\u003c\/b\u003e 3.2ft³\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Style:\u003c\/b\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Standard Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLid Type:\u003c\/b\u003e Single Lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch Type:\u003c\/b\u003e Key-operated stainless steel paddle handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarrying Handles:\u003c\/b\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight:\u003c\/b\u003e 27.6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 31.8 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Method:\u003c\/b\u003e Freight (LTL) only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation Difficulty:\u003c\/b\u003e Easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 672078080699\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime, with one year on the finish and one year on the parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the UTV bed with UWS vehicle-specific brackets, which are not supplied with this part number  ·  \u003cb\u003eTime:\u003c\/b\u003e About 45 minutes to an hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket and wrench set, drill and the bit size called out on the bracket sheet where the application requires drilling  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Easy to intermediate, DIY-friendly\u003c\/p\u003e\n\u003cp\u003eThis part number does not include brackets, so source the correct UWS bracket kit for your machine before you start. Once you have it, offer the box up and locate the brackets before drilling, check the lid clears the cab and cage through its full travel, then torque everything down and re-check the fasteners after the first few hours of use.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum, 3.2ft³, Box Only, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-uws-group-4505f8d7-installation-manual.pdf?v=1785333155\" target=\"_blank\" rel=\"noopener\" title=\"Download the UWS installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eUWS UTV Tool Box Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e UWS limited lifetime warranty on the box, with one year on the finish and one year on the parts. The warranty covers defects in materials and workmanship; it does not cover damage from overloading, misuse, accident or improper installation, and it does not cover normal wear on the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout UWS\u003c\/h3\u003e\n\u003cp\u003eUWS is short for United Welding Services, and the name is the point: every UWS box starts as flat aluminum sheet and is welded into a single-piece tub rather than riveted or folded together. The company builds at its own plant in Perry, Florida, and it has been supplying the truck accessory trade long enough that the diamond plate box with the blue UWS badge is a familiar sight on job sites. UWS is part of the CURT Group, which in turn belongs to Lippert, so behind a fairly specialized Florida welding shop sits a full national parts and warranty network.\u003c\/p\u003e\n\u003cp\u003eTwo pieces of engineering separate a UWS box from a generic aluminum one. The first is the patented RigidCore lid: instead of a hollow shell, the lid is a pair of aluminum plates completely filled with a hardening, expanding foam, which sets into a solid structure and stops the lid bending, warping or binding after a few years of being leaned on. The second is the MicroSeal gasket, which lines the entire seam where the lid meets the tub and keeps water, dust, grit and insects out of the box rather than merely slowing them down. Both are backed by a limited lifetime warranty on the box, with one year on the finish and one year on the parts.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized UWS dealer. Every box we ship is new, in the original UWS carton, built in the USA, and covered by the full UWS factory warranty.\u003c\/p\u003e","brand":"UWS","offers":[{"title":"Default Title","offer_id":48935749058804,"sku":"UWSUTV-59-MB","price":670.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-utv-59-mb-59-in-utv-crossbed-tool-box-hero-front-three-quarter.webp?v=1785301653"},{"product_id":"uws-59-in-utv-crossbed-tool-box-matte-black-aluminum-3-2-cu-ft-polaris-ranger-1000-box-only-utv-59pr-mb","title":"UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum, 3.2ft³, Polaris Ranger 1000, Box Only (UTV-59PR-MB)","description":"\u003cp\u003eThe UWS 59\" UTV Crossbed Tool Box runs across the front of a side-by-side bed and gives you 3.2ft³ of locked, sealed storage while leaving the rest of the load floor clear. It is 59.75\" across, only 12.25\" deep and 10.25\" tall, which is the shape that makes it work: it takes the strip of bed you were not really using and turns it into somewhere chainsaw kit, straps, fencing tools or a couple of cases can live. This part number is the box on its own, without brackets: UWS builds it to mount with vehicle-specific brackets, but the kit is not in this carton and has to be ordered separately for your machine. The tub is aluminum welded into a single piece in the USA and finished in matte black powder coat, which stays glare-free across the hood. The lid carries UWS's patented RigidCore foam-filled construction so it does not flex or warp, and a MicroSeal gasket runs the lid seam to keep out the water and fine grit that get into everything on a trail machine. A recessed key-operated stainless steel paddle handle locks it. Empty weight is 27.6 lb, and this SKU ships by freight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne UWS 59\" UTV Crossbed Tool Box, Matte Black Aluminum\u003c\/li\u003e\n\u003cli\u003eTwo keys (UWS install sheet Parts List for this box: 1 UTV tool box, 2 keys)\u003c\/li\u003e\n\u003cli\u003eMicroSeal gasket, factory-fitted around the lid seam\u003c\/li\u003e\n\u003cli\u003eMounting brackets and hardware are NOT included with this part number. UWS publishes the bare box sheet under UTV-59-MB and its Parts List reads: 1 UTV tool box, 2 keys, with a note that vehicle-specific hardware comes in kits sold separately\u003c\/li\u003e\n\u003cli\u003eUWS limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/C4qfdS91V8E\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3.2ft³ Across the Bed of the Side-by-Side\u003c\/strong\u003e\u003cbr\u003eThe box runs 59.75\" across the UTV bed, stands only 10.25\" tall and is just 12.25\" deep, so it takes the front strip of the bed and leaves the rest of the load floor clear. UWS rates the interior at 3.2ft³, which is enough for chainsaw kit, tow straps, fencing tools or a couple of rifle cases without eating the space you actually haul in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Vehicle-Specific Brackets, Sold Separately\u003c\/strong\u003e\u003cbr\u003eThis is the bare box. It is built to mount with UWS vehicle-specific brackets, but the bracket kit is not in the carton and has to be ordered separately for your machine. If you want the box and the brackets together, buy the bracketed SKU for your application instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented RigidCore Lid and MicroSeal Gasket\u003c\/strong\u003e\u003cbr\u003eThe lid uses the same patented RigidCore construction as UWS's truck boxes, with hardening foam pressed between two aluminum plates so it does not flex or warp, and a MicroSeal gasket runs the lid seam to keep out dust, water and the fine grit that gets into everything on a trail machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelded Aluminum Tub, Powder Coated Matte Black\u003c\/strong\u003e\u003cbr\u003eThe tub is aluminum, welded into a single piece in the USA, and finished in matte black powder coat. Matte black is the practical choice on a UTV: it does not throw glare back at you across the hood, and the powder coat adds corrosion resistance on top of what aluminum already gives you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey-Operated Stainless Steel Paddle Handle\u003c\/strong\u003e\u003cbr\u003eA recessed stainless steel paddle handle keeps the box locked and keeps the latch out of the way of shins and cargo. Stainless matters here because a UTV box spends its life wet and muddy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips Freight\u003c\/strong\u003e\u003cbr\u003eThis SKU ships by freight (LTL), which suits a box this size going to a shop or a yard. UWS also sells the identical box in heavy parcel packaging under a different part number if a freight delivery is awkward for you.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePolaris Ranger 1000\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, on certain model years. UWS lists this SKU for the Polaris Ranger 1000; confirm your machine and year against the UWS application guide before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eOther side-by-side models\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Only with the correct UWS bracket kit for that machine. The box itself is common across the range; the brackets are what make it vehicle-specific.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eATVs and four-wheelers\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. This is a crossbed box for a side-by-side bed. UWS builds the ATV box for rack mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003ePickup truck beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. At 59.75\" long and 12.25\" deep this box is proportioned for a UTV bed and has no truck bed-rail mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eBrackets\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e NOT included with this part number. Order the bracket kit for your machine separately, or buy the bracketed SKU.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e This is a UTV crossbed box. It mounts down in the bed of a side-by-side with vehicle-specific brackets, and it is not a truck bed-rail box: there is nothing on it that clamps to a pickup bed rail, and the 59.75\" x 12.25\" x 10.25\" proportions are wrong for a truck. UWS publishes fitment by machine and model year in its application guide and states only that this SKU suits certain years, so treat the application named here as the starting point and verify the year against UWS before you order. No bracket kit is in this carton.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUWS Part Number:\u003c\/b\u003e UTV-59PR-MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e UTV crossbed tool box\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Aluminum diamond plate, welded single-piece tub\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Length:\u003c\/b\u003e 59.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Width:\u003c\/b\u003e 12.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Height:\u003c\/b\u003e 10.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Length:\u003c\/b\u003e 52\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Width:\u003c\/b\u003e 11.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Height:\u003c\/b\u003e 4.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage Capacity:\u003c\/b\u003e 3.2ft³\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Style:\u003c\/b\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Standard Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLid Type:\u003c\/b\u003e Single Lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch Type:\u003c\/b\u003e Key-operated stainless steel paddle handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarrying Handles:\u003c\/b\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight:\u003c\/b\u003e 27.6 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 31.8 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Method:\u003c\/b\u003e Freight (LTL) only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation Difficulty:\u003c\/b\u003e Easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 672078083201\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime, with one year on the finish and one year on the parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the UTV bed with UWS vehicle-specific brackets, which are not supplied with this part number  ·  \u003cb\u003eTime:\u003c\/b\u003e About 45 minutes to an hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket and wrench set, drill and the bit size called out on the bracket sheet where the application requires drilling  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Easy to intermediate, DIY-friendly\u003c\/p\u003e\n\u003cp\u003eThis part number does not include brackets, so source the correct UWS bracket kit for your machine before you start. Once you have it, offer the box up and locate the brackets before drilling, check the lid clears the cab and cage through its full travel, then torque everything down and re-check the fasteners after the first few hours of use.\u003c\/p\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e UWS limited lifetime warranty on the box, with one year on the finish and one year on the parts. The warranty covers defects in materials and workmanship; it does not cover damage from overloading, misuse, accident or improper installation, and it does not cover normal wear on the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout UWS\u003c\/h3\u003e\n\u003cp\u003eUWS is short for United Welding Services, and the name is the point: every UWS box starts as flat aluminum sheet and is welded into a single-piece tub rather than riveted or folded together. The company builds at its own plant in Perry, Florida, and it has been supplying the truck accessory trade long enough that the diamond plate box with the blue UWS badge is a familiar sight on job sites. UWS is part of the CURT Group, which in turn belongs to Lippert, so behind a fairly specialized Florida welding shop sits a full national parts and warranty network.\u003c\/p\u003e\n\u003cp\u003eTwo pieces of engineering separate a UWS box from a generic aluminum one. The first is the patented RigidCore lid: instead of a hollow shell, the lid is a pair of aluminum plates completely filled with a hardening, expanding foam, which sets into a solid structure and stops the lid bending, warping or binding after a few years of being leaned on. The second is the MicroSeal gasket, which lines the entire seam where the lid meets the tub and keeps water, dust, grit and insects out of the box rather than merely slowing them down. Both are backed by a limited lifetime warranty on the box, with one year on the finish and one year on the parts.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized UWS dealer. Every box we ship is new, in the original UWS carton, built in the USA, and covered by the full UWS factory warranty.\u003c\/p\u003e","brand":"UWS","offers":[{"title":"Default Title","offer_id":48935751909620,"sku":"UWSUTV-59PR-MB","price":668.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-utv-59pr-mb-59-in-utv-crossbed-tool-box-hero-front-three-quarter_609aae6f-94f0-47a7-91c1-5dae640f9958.webp?v=1785337569"},{"product_id":"uws-33-in-utv-side-mount-tool-box-matte-black-aluminum-2-45-cu-ft-polaris-ranger-full-size-utv-sm33-mb","title":"UWS 33\" UTV Side-Mount Tool Box, Matte Black Aluminum, 2.45ft³, Polaris Ranger Full-Size (UTV-SM33-MB)","description":"\u003cp\u003eThe UWS 33\" UTV Side Tool Box bolts to the inside of a side-by-side's bed wall, so it adds 2.45ft³ of locked storage without taking the middle of the bed away from you. It is an L-shaped box by design: 34\" long and 15.25\" tall, but stepping in from 12\" at the top to 8.5\" at the floor so it clears the wheel arch. It installs with vehicle-specific hardware for Polaris Ranger Full-Size, which is included, and UWS lists it for certain model years, so check your machine's year in the UWS application guide first. The tub is 0.058\" aluminum welded into one piece and powder coated matte black, the lid uses UWS's patented RigidCore foam-filled construction, and a MicroSeal gasket lines the inside edge to keep out dirt, moisture and insects. The lid self-opens to a full 90 degrees, which matters on a side box you are reaching into one-handed. A key-operated stainless steel paddle handle locks it, and empty weight is 18.5 lb. This SKU ships by freight (LTL).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne UWS 33\" UTV Side Tool Box, Matte Black Aluminum\u003c\/li\u003e\n\u003cli\u003eKeys for the locking handle\u003c\/li\u003e\n\u003cli\u003eMicroSeal gasket, factory-fitted around the lid seam\u003c\/li\u003e\n\u003cli\u003eSelf-opening gas struts, factory-fitted\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting bracket and hardware kit for Polaris Ranger Full-Size\u003c\/li\u003e\n\u003cli\u003eUWS limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cKLCkUufXFM\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2.45ft³ Bolted to the Bed Wall\u003c\/strong\u003e\u003cbr\u003eThe UTV-SM33-MB is an L-shaped box that hangs on the inside of the UTV bed wall: 34\" long, 15.25\" tall and only 12\" deep, with the lower section stepping in to null so it clears the wheel arch. That shape is how it gets 2.45ft³ of storage without taking the middle of the bed away from you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle-Specific Hardware for a Custom Fit\u003c\/strong\u003e\u003cbr\u003eIt installs with vehicle-specific hardware for Polaris Ranger Full-Size, so it bolts solidly to the bed wall instead of relying on straps. UWS lists it as a fit for certain model years only, so confirm your machine against the UWS application guide before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented RigidCore Lid and MicroSeal Gasket\u003c\/strong\u003e\u003cbr\u003eThe lid carries UWS's patented RigidCore construction, two aluminum plates completely filled with a hardening foam, so it stays rigid and does not bind. A MicroSeal gasket lines the inside edge of the lid to keep out dirt, moisture, insects and other pests.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-Opening Lid That Goes to 90 Degrees\u003c\/strong\u003e\u003cbr\u003eThe lid self-opens and swings to a full 90 degrees, which matters more on a side box than on a chest because you are usually reaching into it one-handed while standing alongside the machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0.058\" Welded Aluminum, Matte Black Powder Coat\u003c\/strong\u003e\u003cbr\u003eUWS welds 0.058\" aluminum plates into a one-piece tub, then powder coats it matte black. The powder coat adds corrosion resistance over aluminum's own, and the matte finish keeps the look tactical rather than shiny in the bed of the machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips Freight\u003c\/strong\u003e\u003cbr\u003eThis is the freight version, shipped LTL. UWS sells the identical box heavily packaged for parcel delivery as EC10993 if a freight appointment does not suit you.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePolaris Ranger Full-Size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, on certain model years. Confirm your machine and year against the UWS application guide before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eOther side-by-side models\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Only where UWS publishes an application. The mounting hardware is vehicle-specific.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eATVs and four-wheelers\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. This box bolts to a UTV bed wall and needs one to hang from.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003ePickup truck beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No. This is a 34\" side-mount box shaped to clear a UTV wheel arch, with no truck bed-rail mounting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eMounting hardware\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Vehicle-specific hardware is included with this part number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e This is a UTV side-mount box: it bolts to the inside of the bed wall of a side-by-side and steps in at the bottom to clear the wheel arch, which is why the tub is 8.5\" wide at the floor against 12\" at the top. It is not a truck bed box and it has no bed-rail mounting. UWS lists it for certain model years of the Polaris Ranger Full-Size, so check your machine's year in the UWS application guide before ordering.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUWS Part Number:\u003c\/b\u003e UTV-SM33-MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e UTV side-mount tool box\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Aluminum diamond plate, welded single-piece tub\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Length:\u003c\/b\u003e 34\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Width:\u003c\/b\u003e 12\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Height:\u003c\/b\u003e 15.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Length:\u003c\/b\u003e 33\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Width:\u003c\/b\u003e 8.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Height:\u003c\/b\u003e 9.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage Capacity:\u003c\/b\u003e 2.45ft³\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTub Style:\u003c\/b\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Standard Profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLid Type:\u003c\/b\u003e Single Lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch Type:\u003c\/b\u003e Key-operated stainless steel paddle handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight:\u003c\/b\u003e 18.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 22.5 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Method:\u003c\/b\u003e Freight (LTL) only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation Difficulty:\u003c\/b\u003e Easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 672078083416\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime, with one year on the finish and one year on the parts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the UTV bed with the supplied vehicle-specific brackets  ·  \u003cb\u003eTime:\u003c\/b\u003e About 45 minutes to an hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket and wrench set, drill and the bit size called out on the bracket sheet where the application requires drilling  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Easy to intermediate, DIY-friendly\u003c\/p\u003e\n\u003cp\u003eCheck your machine's model year against the UWS application guide before you start, because the bracket kit is cut for specific years. Offer the box up and locate the brackets before drilling anything, then check the lid opens fully and clears the cab, the roll cage and any rear seat before you tighten everything down. Re-check the fasteners after the first few hours of use; a UTV shakes bolts loose faster than a truck does.\u003c\/p\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e UWS limited lifetime warranty on the box, with one year on the finish and one year on the parts. The warranty covers defects in materials and workmanship; it does not cover damage from overloading, misuse, accident or improper installation, and it does not cover normal wear on the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout UWS\u003c\/h3\u003e\n\u003cp\u003eUWS is short for United Welding Services, and the name is the point: every UWS box starts as flat aluminum sheet and is welded into a single-piece tub rather than riveted or folded together. The company builds at its own plant in Perry, Florida, and it has been supplying the truck accessory trade long enough that the diamond plate box with the blue UWS badge is a familiar sight on job sites. UWS is part of the CURT Group, which in turn belongs to Lippert, so behind a fairly specialized Florida welding shop sits a full national parts and warranty network.\u003c\/p\u003e\n\u003cp\u003eTwo pieces of engineering separate a UWS box from a generic aluminum one. The first is the patented RigidCore lid: instead of a hollow shell, the lid is a pair of aluminum plates completely filled with a hardening, expanding foam, which sets into a solid structure and stops the lid bending, warping or binding after a few years of being leaned on. The second is the MicroSeal gasket, which lines the entire seam where the lid meets the tub and keeps water, dust, grit and insects out of the box rather than merely slowing them down. Both are backed by a limited lifetime warranty on the box, with one year on the finish and one year on the parts.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized UWS dealer. Every box we ship is new, in the original UWS carton, built in the USA, and covered by the full UWS factory warranty.\u003c\/p\u003e","brand":"UWS","offers":[{"title":"Default Title","offer_id":48935752794356,"sku":"UWSUTV-SM33-MB","price":476.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/uws-utv-sm33-mb-33-in-utv-side-tool-box-hero-front-three-quarter_3884843a-9a32-46e7-b485-b877876f59fa.webp?v=1785337582"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/collections\/uws-8500002-59-in-utv-crossbed-tool-box-hero-front-three-quarter_2afe4942-1387-43b6-aecb-444057ee1897.webp?v=1789910345","url":"https:\/\/prestigetruck.com\/collections\/atv-utv-tool-boxes.oembed","provider":"Prestige Truck","version":"1.0","type":"link"}