{"title":"Truck Bed Slides","description":null,"products":[{"product_id":"weather-guard-65-in-heavy-duty-sliding-truck-bed-sb65-52-01","title":"Weather Guard 65 in Heavy-Duty Sliding Truck Bed, 2,000 lb, Matte Black (SB65-52-01)","description":"\u003cp\u003eStop climbing in and out of the bed all day with the Weather Guard SB65-52-01 Heavy-Duty Sliding Truck Bed. This 65\" steel platform rolls 100 percent out to the tailgate so your tools and materials come to you, and it is rated to carry up to 2,000 pounds. Sized for full-size trucks with a standard bed, it wears a matte black powder coat and works alongside Weather Guard boxes, racks and Pack Rat units for a complete work-truck setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeather Guard 65\" Heavy-Duty Sliding Truck Bed platform\u003c\/li\u003e\n\u003cli\u003eRemovable side guard rails\u003c\/li\u003e\n\u003cli\u003eFour adjustable tie-down anchors\u003c\/li\u003e\n\u003cli\u003eIntegrated center c-channel for securing loads\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel roller and slide mechanism\u003c\/li\u003e\n\u003cli\u003eBed-mount hardware\u003c\/li\u003e\n\u003cli\u003eWeather Guard installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/taM76lYALWo\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e100 Percent Slide-Out Extension\u003c\/strong\u003e\u003cbr\u003eThe deck rolls fully out to the tailgate, bringing your tools and materials to you instead of making you climb into the bed. That means faster loading, less crawling and a lot less wear on your back over a long day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb Steel Platform\u003c\/strong\u003e\u003cbr\u003eA heavy-duty steel platform is rated to carry up to 2,000 pounds, so it handles tool chests, pipe, materials and gear without flexing. It is built to take a beating on demanding jobsites, day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Steel Rollers\u003c\/strong\u003e\u003cbr\u003eHigh-performance steel rollers let the loaded deck glide out and back under a full load, and a powder-coated finish protects the whole assembly from weather and wear. The slide stays smooth even when it is packed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemovable Side Guard Rails\u003c\/strong\u003e\u003cbr\u003ePerforated side guard rails keep cargo from sliding off the deck and pop off when you need a flat, open platform. You get containment when you want it and an unobstructed deck when you do not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour Tie-Downs and Center C-Channel\u003c\/strong\u003e\u003cbr\u003eFour adjustable tie-down anchors plus an integrated center c-channel let you strap loads down anywhere on the deck. Your gear stays put through hard stops, rough roads and jobsite driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks With Your Weather Guard Setup\u003c\/strong\u003e\u003cbr\u003eThe Sliding Bed is designed to work alongside Weather Guard truck boxes, truck racks and Pack Rat drawer units, and it is compatible with the modular truck cap system, so it drops into a complete Weather Guard work-truck build.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eTruck Class\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eExample Trucks\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFull-size 1\/2-ton\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF-150, Silverado\/Sierra 1500, RAM 1500\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, confirm bed length matches the platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFull-size 3\/4-ton and 1-ton\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eF-250\/F-350, Silverado\/Sierra 2500\/3500, RAM 2500\/3500\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, ideal application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eMid-size and compact\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eColorado, Tacoma, Ranger, Frontier\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No, full-size beds only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e The Sliding Bed is a universal fit for full-size domestic pickups rather than a bolt-on for one model. The 65\" platform is sized so it uses the length of a matching full-size bed, and it needs about 50\" of width across the bed floor. Measure your bed's usable interior length and the space between the wheel wells before ordering, and check the Weather Guard truck fit guide for your truck. It is not made for mid-size or compact trucks.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform Length:\u003c\/b\u003e 65\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Dimensions:\u003c\/b\u003e About 66\"L x 50\"W x 5-1\/2\"H (deck height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLoad Capacity:\u003c\/b\u003e Up to 2,000 lb on the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100 percent slide-out to the tailgate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck:\u003c\/b\u003e Flat steel deck with a durable bed-liner surface and center c-channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSide Rails:\u003c\/b\u003e Removable perforated guard rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTie-Downs:\u003c\/b\u003e Four adjustable anchors plus the integrated center c-channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRollers:\u003c\/b\u003e High-performance heavy-duty steel rollers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Full-size domestic pickup trucks only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e About 410 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Bolts to the bed floor, hardware included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited Lifetime\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMade In:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 65\"L x 49-1\/4\"W x 13-1\/4\"H\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Dimensions:\u003c\/b\u003e About 66\"L x 50\"W x 5-1\/2\"H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bed-floor mount, bolt-in  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 to 2 hours  ·  \u003cb\u003eTools:\u003c\/b\u003e Drill and bits, wrench or socket set, tape measure, marker, and zinc-rich primer to seal any drilled holes  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Moderate, best done with two people because the platform is heavy\u003c\/p\u003e\n\u003cp\u003eSet the sliding bed platform into the truck bed and center it, then mark and drill the mounting points through the base and bolt it down to the bed floor with the supplied hardware. Seal any drilled holes with zinc-rich primer to prevent rust. Because the platform is heavy, have a second person help lift and position it. Follow the Weather Guard installation instructions for exact hardware placement and torque.\u003c\/p\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout Weather Guard\u003c\/h3\u003e\n\u003cp\u003eWeather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.\u003c\/p\u003e\n\u003cp\u003eKnown for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.\u003c\/p\u003e\n\u003cp\u003eBacked by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.\u003c\/p\u003e\n\u003cdiv style=\"background:#f7f4f2;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:16px 18px;margin:16px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized Weather Guard dealer.\u003c\/strong\u003e Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.\u003c\/p\u003e\u003c\/div\u003e","brand":"Weather Guard","offers":[{"title":"Default Title","offer_id":48876055232756,"sku":"SB65-52-01","price":3399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/weather-guard-sb65-52-01-65-in-heavy-duty-sliding-truck-bed-matte-black-hero-deck-and-guard-rails.jpg?v=1784817090"},{"product_id":"weather-guard-75-in-heavy-duty-sliding-truck-bed-sb75-52-01","title":"Weather Guard 75 in Heavy-Duty Sliding Truck Bed, 2,000 lb, Matte Black (SB75-52-01)","description":"\u003cp\u003eReach every tool in a long bed without climbing in using the Weather Guard SB75-52-01 Heavy-Duty Sliding Truck Bed. This 75\" steel platform is the long-bed version of the Sliding Bed, rolling 100 percent out to the tailgate and rated to carry up to 2,000 pounds. Built for full-size trucks with an 8' bed, it wears a matte black powder coat and pairs with Weather Guard boxes, racks and Pack Rat units for a complete jobsite build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeather Guard 75\" Heavy-Duty Sliding Truck Bed platform\u003c\/li\u003e\n\u003cli\u003eRemovable side guard rails\u003c\/li\u003e\n\u003cli\u003eFour adjustable tie-down anchors\u003c\/li\u003e\n\u003cli\u003eIntegrated center c-channel for securing loads\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel roller and slide mechanism\u003c\/li\u003e\n\u003cli\u003eBed-mount hardware\u003c\/li\u003e\n\u003cli\u003eWeather Guard installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/taM76lYALWo\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e100 Percent Slide-Out Extension\u003c\/strong\u003e\u003cbr\u003eThe deck rolls fully out to the tailgate, bringing your tools and materials to you instead of making you climb into the bed. That means faster loading, less crawling and a lot less wear on your back over a long day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb Steel Platform\u003c\/strong\u003e\u003cbr\u003eA heavy-duty steel platform is rated to carry up to 2,000 pounds, so it handles tool chests, pipe, materials and gear without flexing. It is built to take a beating on demanding jobsites, day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Steel Rollers\u003c\/strong\u003e\u003cbr\u003eHigh-performance steel rollers let the loaded deck glide out and back under a full load, and a powder-coated finish protects the whole assembly from weather and wear. The slide stays smooth even when it is packed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemovable Side Guard Rails\u003c\/strong\u003e\u003cbr\u003ePerforated side guard rails keep cargo from sliding off the deck and pop off when you need a flat, open platform. You get containment when you want it and an unobstructed deck when you do not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour Tie-Downs and Center C-Channel\u003c\/strong\u003e\u003cbr\u003eFour adjustable tie-down anchors plus an integrated center c-channel let you strap loads down anywhere on the deck. Your gear stays put through hard stops, rough roads and jobsite driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks With Your Weather Guard Setup\u003c\/strong\u003e\u003cbr\u003eThe Sliding Bed is designed to work alongside Weather Guard truck boxes, truck racks and Pack Rat drawer units, and it is compatible with the modular truck cap system, so it drops into a complete Weather Guard work-truck build.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eTruck Class\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eExample Trucks\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFull-size 1\/2-ton\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF-150, Silverado\/Sierra 1500, RAM 1500\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, confirm bed length matches the platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFull-size 3\/4-ton and 1-ton\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eF-250\/F-350, Silverado\/Sierra 2500\/3500, RAM 2500\/3500\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, ideal application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eMid-size and compact\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eColorado, Tacoma, Ranger, Frontier\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e No, full-size beds only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e The Sliding Bed is a universal fit for full-size domestic pickups rather than a bolt-on for one model. The 75\" platform is sized so it uses the length of a matching full-size bed, and it needs about 50\" of width across the bed floor. Measure your bed's usable interior length and the space between the wheel wells before ordering, and check the Weather Guard truck fit guide for your truck. It is not made for mid-size or compact trucks.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePlatform Length:\u003c\/b\u003e 75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Dimensions:\u003c\/b\u003e About 76\"L x 50\"W x 5-1\/2\"H (deck height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLoad Capacity:\u003c\/b\u003e Up to 2,000 lb on the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100 percent slide-out to the tailgate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck:\u003c\/b\u003e Flat steel deck with a durable bed-liner surface and center c-channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSide Rails:\u003c\/b\u003e Removable perforated guard rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTie-Downs:\u003c\/b\u003e Four adjustable anchors plus the integrated center c-channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRollers:\u003c\/b\u003e High-performance heavy-duty steel rollers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Full-size domestic pickup trucks only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e About 450 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Bolts to the bed floor, hardware included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited Lifetime\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMade In:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 75\"L x 49-1\/4\"W x 13-1\/4\"H\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Dimensions:\u003c\/b\u003e About 76\"L x 50\"W x 5-1\/2\"H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bed-floor mount, bolt-in  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 to 2 hours  ·  \u003cb\u003eTools:\u003c\/b\u003e Drill and bits, wrench or socket set, tape measure, marker, and zinc-rich primer to seal any drilled holes  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Moderate, best done with two people because the platform is heavy\u003c\/p\u003e\n\u003cp\u003eSet the sliding bed platform into the truck bed and center it, then mark and drill the mounting points through the base and bolt it down to the bed floor with the supplied hardware. Seal any drilled holes with zinc-rich primer to prevent rust. Because the platform is heavy, have a second person help lift and position it. Follow the Weather Guard installation instructions for exact hardware placement and torque.\u003c\/p\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout Weather Guard\u003c\/h3\u003e\n\u003cp\u003eWeather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.\u003c\/p\u003e\n\u003cp\u003eKnown for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.\u003c\/p\u003e\n\u003cp\u003eBacked by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.\u003c\/p\u003e\n\u003cdiv style=\"background:#f7f4f2;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:16px 18px;margin:16px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized Weather Guard dealer.\u003c\/strong\u003e Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.\u003c\/p\u003e\u003c\/div\u003e","brand":"Weather Guard","offers":[{"title":"Default Title","offer_id":48876055265524,"sku":"SB75-52-01","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/weather-guard-sb75-52-01-75-in-heavy-duty-sliding-truck-bed-matte-black-hero-deck-and-guard-rails.jpg?v=1784817096"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-75-in-x-48-in-black-10-7548-clb","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 75\" x 48\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 75\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 6.5' \u0026amp; 6.6' Beds (1970-2018), Ram 1500\/2500\/3500 6.5' Beds (1981-2001), F150 \u0026amp; F-Series 6.5' Bed (1970-Current), Titan 6.5' Bed (2004-2016) and Tundra 6.5' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 75\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2022+ Tundra 6.5' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 6.5' \u0026amp; 6.6' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-2018\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500\/2500\/3500 6.5' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1981-2001\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 \u0026amp; F-Series 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eTitan 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2004-2016\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 75\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7548-CLB \/ 10-7548-CLS \/ TT10-7548-CLB \/ TT10-7548-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 75\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2022+ Tundra 6.5' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 165 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7548-CLB 856341006672; 10-7548-CLS 851274002746; TT10-7548-CLB 810059881013; TT10-7548-CLS 810059881006\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 165 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 75\" x 48\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107147882740,"sku":"10-7548-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107147915508,"sku":"10-7548-CLS","price":1552.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (2022+ Tundra 6.5' Bed)","offer_id":49107147948276,"sku":"TT10-7548-CLB","price":1880.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2022+ Tundra 6.5' Bed)","offer_id":49107147981044,"sku":"TT10-7548-CLS","price":1710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-75x48-black-edition-extended-over-tailgate.jpg?v=1786369401"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-53-in-x-37-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 53\" x 37\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 53\" x 37\" version. BEDSLIDE does not list this size in its published make and model chart, so fit it by measuring the inside of your bed floor rather than by model year. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 53\" x 37\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 53\" x 37\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 53\" x 37\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 4.5\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e Not published for this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE does not list this size in its published Application Guide chart, so there are no make and model rows to show for it. Fit it by measuring the inside of your bed floor. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-5337-CLB \/ 10-5337-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 53\" x 37\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 10-5337-CLB 105 lb; 10-5337-CLS 122 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-5337-CLB 812227028121; 10-5337-CLS 812227028114\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 105 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 53\" x 37\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107112427764,"sku":"10-5337-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107112460532,"sku":"10-5337-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-53x37-black-edition-extended-over-tailgate.jpg?v=1786369074"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-57-in-x-43-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 57\" x 43\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 57\" x 43\" version. BEDSLIDE lists this size for Jeep Gladiator (2019-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 57\" x 43\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eJEEP\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eJeep Gladiator\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2019-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 57\"L x 43.5\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 57\" x 43\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. One number to watch: BEDSLIDE's Application Guide prints the Jeep Gladiator bed size as 57\"L x 43.5\"W, and lists this 57\" x 43\" tray as the fit for it. Those are BEDSLIDE's own figures, and half an inch is the kind of gap that decides whether a tray goes in, so measure your own bed floor before you order.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-5743-CLB \/ 10-5743-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 57\" x 43\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 10-5743-CLB 122 lb; 10-5743-CLS 105 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-5743-CLB 850001518482; 10-5743-CLS 850001518499\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 122 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 57\" x 43\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107113181428,"sku":"10-5743-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107113214196,"sku":"10-5743-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-57x43-black-edition-extended-over-tailgate.jpg?v=1786369081"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-58-in-x-39-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 58\" x 39\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 58\" x 39\" version. BEDSLIDE lists this size for Colorado \/ Canyon - 5.1' Bed (2004-2022) and Tacoma 5' Bed (2002-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 58\" x 39\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eColorado \/ Canyon - 5.1' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2004-2022\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 58\"L x 39\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eTacoma 5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2002-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 58\"L x 39\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 58\" x 39\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-5839-CLB \/ 10-5839-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 58\" x 39\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 10-5839-CLB 105 lb; 10-5839-CLS 166 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-5839-CLB 856341006764; 10-5839-CLS 851274002753\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 105 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 58\" x 39\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107114033396,"sku":"10-5839-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107114066164,"sku":"10-5839-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-58x39-black-edition-extended-over-tailgate.jpg?v=1786369088"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-58-in-x-41-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 58\" x 41\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 58\" x 41\" version. BEDSLIDE lists this size for Colorado \/ Canyon - 5.1' Bed (2023-Current) and Ranger 5' Beds (2019-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 58\" x 41\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2024+ Tacoma 5' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eColorado \/ Canyon - 5.1' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2023-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 58\"L x 39\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRanger 5' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2019-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 58\"L x 41\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 58\" x 41\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. One number to watch: BEDSLIDE's Application Guide prints the Colorado \/ Canyon 5.1' bed as 58\"L x 39\"W, and lists this 58\" x 41\" tray as the fit for it. Those are BEDSLIDE's own figures, and two inches of width is the kind of gap that decides whether a tray goes in, so measure your own bed floor before you order. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits. Worth calling out: the bracket options cover the 2024+ Tacoma 5' Bed, which takes this same 58\" x 41\" tray but is not carried in BEDSLIDE's published Application Guide chart above. The brackets exist because the truck fits; the chart simply has not caught up.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-5841-CLB \/ 10-5841-CLS \/ TC10-5841-CLB \/ TC10-5841-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 58\" x 41\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2024+ Tacoma 5' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 10-5841-CLB 118 lb; 10-5841-CLS 105 lb; TC10-5841-CLB 135 lb; TC10-5841-CLS 110 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-5841-CLB 850001518116; 10-5841-CLS 856341006993; TC10-5841-CLB 810059882355; TC10-5841-CLS 810059882348\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 118 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 58\" x 41\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107114885364,"sku":"10-5841-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107114918132,"sku":"10-5841-CLS","price":1552.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (2024+ Tacoma 5' Bed)","offer_id":49107114950900,"sku":"TC10-5841-CLB","price":1880.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2024+ Tacoma 5' Bed)","offer_id":49107114983668,"sku":"TC10-5841-CLS","price":1752.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-58x41-black-edition-extended-over-tailgate.png?v=1786369096"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-62-in-x-43-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 62\" x 43\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 62\" x 43\" version. BEDSLIDE lists this size for Dakota 5.4' Bed (2000-2012), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 62\" x 43\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eDakota 5.4' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2000-2012\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 62\"L x 43\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 62\" x 43\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-6243-CLB \/ 10-6243-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 62\" x 43\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 124 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-6243-CLB 856341006757; 10-6243-CLS 851274002760\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 124 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 62\" x 43\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107115442420,"sku":"10-6243-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107115475188,"sku":"10-6243-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-62x43-black-edition-extended-over-tailgate.jpg?v=1786369102"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-63-in-x-47-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 63\" x 47\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 63\" x 47\" version. BEDSLIDE lists this size for Suburban \/ Yukon XL - Cargo Door \u0026amp; Lift Gate (1992-2014), Ram 1500 5.7' Bed w\/RamBox (2009-Current) and Tundra 5.5' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 63\" x 47\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2022+ Tundra 5.5' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSuburban \/ Yukon XL - Cargo Door \u0026amp; Lift Gate\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1992-2014\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 63\"L x 47\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500 5.7' Bed w\/RamBox\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2009-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 63\"L x 47\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 5.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 63\"L x 47\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 63\" x 47\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-6347-CLB \/ 10-6347-CLS \/ TT10-6347-CLB \/ TT10-6347-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 63\" x 47\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2022+ Tundra 5.5' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 134 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-6347-CLB 856341006740; 10-6347-CLS 851274002777; TT10-6347-CLB 810059880986; TT10-6347-CLS 810059880993\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 134 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 63\" x 47\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107115999476,"sku":"10-6347-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107116032244,"sku":"10-6347-CLS","price":1552.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (2022+ Tundra 5.5' Bed)","offer_id":49107116065012,"sku":"TT10-6347-CLB","price":1880.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2022+ Tundra 5.5' Bed)","offer_id":49107116097780,"sku":"TT10-6347-CLS","price":1710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-63x47-black-edition-extended-over-tailgate.jpg?v=1786369108"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-65-in-x-48-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 65\" x 48\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 65\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 5.5' \u0026amp; 5.8' Beds (2004-2018), Ram 1500 5.7' Bed (2009-Current), F150 5.5' Bed (Includes Mark LT \/ Raptor) (2001-Current) and Titan 5.5' Bed (2004-2017), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 65\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 5.5' \u0026amp; 5.8' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2004-2018\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500 5.7' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2009-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 5.5' Bed (Includes Mark LT \/ Raptor)\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2001-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eTitan 5.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2004-2017\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 65\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-6548-CLB \/ 10-6548-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 65\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 138 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-6548-CLB 856341006733; 10-6548-CLS 856341006955\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 138 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 65\" x 48\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107116720372,"sku":"10-6548-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107116753140,"sku":"10-6548-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-65x48-black-edition-extended-over-tailgate.jpg?v=1786369114"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-68-in-x-48-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 68\" x 48\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 68\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 5.9' Beds (2019-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 68\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (Silverado\/Sierra EV). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 5.9' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2019-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 68\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 68\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-6848-CLB \/ GSE10-6848-CLB \/ GSE10-6848-CLS \/ 10-6848-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 68\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (Silverado\/Sierra EV)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 10-6848-CLB 138 lb; GSE10-6848-CLB 158 lb; GSE10-6848-CLS 158 lb; 10-6848-CLS 138 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-6848-CLB 850001518109; GSE10-6848-CLB 810059882515; GSE10-6848-CLS 810059882508; 10-6848-CLS 850001518093\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 138 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 68\" x 48\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107117506804,"sku":"10-6848-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (Silverado\/Sierra EV)","offer_id":49107117539572,"sku":"GSE10-6848-CLB","price":1907.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (Silverado\/Sierra EV)","offer_id":49107117572340,"sku":"GSE10-6848-CLS","price":1815.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107117605108,"sku":"10-6848-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-68x48-black-edition-extended-over-tailgate.jpg?v=1786369120"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-70-in-x-38-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 70\" x 38\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 70\" x 38\" version. BEDSLIDE lists this size for S-10 \/ Sonoma 6' Bed (1976-2003), Ranger \u0026amp; B Series 6' Beds (1998-2012) and Tacoma 6' Bed (2005-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 70\" x 38\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eS-10 \/ Sonoma 6' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1976-2003\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 70\"L x 38\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRanger \u0026amp; B Series 6' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1998-2012\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 70\"L x 38\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTacoma 6' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2005-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 70\"L x 38\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 70\" x 38\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7038-CLB \/ 10-7038-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 70\" x 38\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 130 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7038-CLB 856341006726; 10-7038-CLS 851274002722\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 130 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 70\" x 38\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107118326004,"sku":"10-7038-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107118358772,"sku":"10-7038-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-70x38-black-edition-extended-over-tailgate.jpg?v=1786369126"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-70-in-x-41-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 70\" x 41\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 70\" x 41\" version. BEDSLIDE lists this size for Colorado \/ Canyon - 6.1' Bed (2004-2014), Ranger 6' Beds (2019-2023) and Frontier 6' Bed (2005-2007), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 70\" x 41\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2024+ Tacoma 6' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eColorado \/ Canyon - 6.1' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2004-2014\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 70\"L x 41\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRanger 6' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2019-2023\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 70\"L x 41\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eFrontier 6' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2005-2007\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 70\"L x 41\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 70\" x 41\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits. Worth calling out: the bracket options cover the 2024+ Tacoma 6' Bed, which takes this same 70\" x 41\" tray but is not carried in BEDSLIDE's published Application Guide chart above. The brackets exist because the truck fits; the chart simply has not caught up.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7041-CLB \/ 10-7041-CLS \/ TC10-7041-CLB \/ TC10-7041-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 70\" x 41\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2024+ Tacoma 6' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 10-7041-CLB 138 lb; 10-7041-CLS 138 lb; TC10-7041-CLB 145 lb; TC10-7041-CLS 145 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7041-CLB 856341006719; 10-7041-CLS 851274002739; TC10-7041-CLB 810059882386; TC10-7041-CLS 810059882379\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 138 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 70\" x 41\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107119177972,"sku":"10-7041-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107119210740,"sku":"10-7041-CLS","price":1552.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (2024+ Tacoma 6' Bed)","offer_id":49107119243508,"sku":"TC10-7041-CLB","price":1880.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2024+ Tacoma 6' Bed)","offer_id":49107119276276,"sku":"TC10-7041-CLS","price":1752.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-70x41-black-edition-extended-over-tailgate.jpg?v=1786369133"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-71-in-x-41-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 71\" x 41\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 71\" x 41\" version. BEDSLIDE does not list this size in its published make and model chart, so fit it by measuring the inside of your bed floor rather than by model year. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 71\" x 41\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 71\" x 41\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 71\" x 41\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 4.5\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e Not published for this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE does not list this size in its published Application Guide chart, so there are no make and model rows to show for it. Fit it by measuring the inside of your bed floor. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7141-CLB \/ 10-7141-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 71\" x 41\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 138 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7141-CLB 810059882188; 10-7141-CLS 810059882195\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 138 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 71\" x 41\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107119931636,"sku":"10-7141-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107119964404,"sku":"10-7141-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-71x41-black-edition-extended-over-tailgate.jpg?v=1786369140"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-71-in-x-42-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 71\" x 42\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 71\" x 42\" version. BEDSLIDE lists this size for Colorado \/ Canyon - 6.1' Bed (2015-2022) and Frontier 6' Bed (2008-2016), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 71\" x 42\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eColorado \/ Canyon - 6.1' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2015-2022\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 71\"L x 42\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eFrontier 6' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2008-2016\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 71\"L x 42\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 71\" x 42\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7142-CLB \/ 10-7142-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 71\" x 42\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 153 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7142-CLB 856341006702; 10-7142-CLS 851274002821\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 153 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 71\" x 42\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107120554228,"sku":"10-7142-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107120586996,"sku":"10-7142-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-71x42-black-edition-extended-over-tailgate.jpg?v=1786369146"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-73-in-x-48-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 73\" x 48\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 73\" x 48\" version. BEDSLIDE lists this size for Ram 1500\/2500\/3500 6.4' Beds (Includes RamBox) (2002-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 73\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eRam 1500\/2500\/3500 6.4' Beds (Includes RamBox)\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2002-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 73\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 73\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7348-CLB \/ 10-7348-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 73\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 160 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7348-CLB 856341006696; 10-7348-CLS 851274002814\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 160 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 73\" x 48\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107121242356,"sku":"10-7348-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107121275124,"sku":"10-7348-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-73x48-black-edition-extended-over-tailgate.jpg?v=1786369152"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-75-in-x-43-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 75\" x 43\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 75\" x 43\" version. BEDSLIDE lists this size for Dakota 6.6' Bed (2011-2012), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 75\" x 43\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eDakota 6.6' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2011-2012\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 43\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 75\" x 43\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7543-CLB \/ 10-7543-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 75\" x 43\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 163 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7543-CLB 856341006689; 10-7543-CLS 851274002807\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 163 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 75\" x 43\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107122061556,"sku":"10-7543-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107122094324,"sku":"10-7543-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-75x43-black-edition-extended-over-tailgate.jpg?v=1786369158"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-78-in-x-48-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 78\" x 48\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 78\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 6.9' Beds \/ HD (2019-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 78\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 6.9' Beds \/ HD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2019-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 78\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 78\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7848-CLB \/ 10-7848-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 78\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 172 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7848-CLB 850001518086; 10-7848-CLS 850001518079\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 172 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 78\" x 48\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107122946292,"sku":"10-7848-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107122979060,"sku":"10-7848-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-78x48-black-edition-extended-over-tailgate.jpg?v=1786369167"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-79-in-x-48-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 79\" x 48\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 79\" x 48\" version. BEDSLIDE lists this size for F250 \/ F350 SuperDuty 6.9' Bed (1998-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 79\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF250 \/ F350 SuperDuty 6.9' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1998-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 79\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 79\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-7948-CLB \/ 10-7948-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 79\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 190 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-7948-CLB 856341006665; 10-7948-CLS 851274002715\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 190 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 79\" x 48\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107123503348,"sku":"10-7948-CLB","price":1722.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107123536116,"sku":"10-7948-CLS","price":1552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-79x48-black-edition-extended-over-tailgate.jpg?v=1786369173"},{"product_id":"bedslide-1000-classic-truck-bed-cargo-slide-95-in-x-48-in","title":"BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 95\" x 48\", 1,000 lb","description":"\u003cp\u003eThe BEDSLIDE 1000 Classic is the original slide-out truck bed cargo tray, and this is the 95\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 8' Longbed (1970-Current), Ram 1500\/2500\/3500 8' Beds (1981-Current), F150 8' Bed (1970-Current), F250 \/ F350 SuperDuty 8' Bed (1998-Current), Titan 8' Bed (2004-2015), T-100 8' Bed (1993-1999) and Tundra 8' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1000 Classic cargo slide, 95\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4HrJTj6YXJY\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1000 Classic is rated to carry 1,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take the gear most trucks actually carry, from tool boxes and coolers to camp kit and building supplies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2022+ Tundra 8' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 8' Longbed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500\/2500\/3500 8' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1981-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eF250 \/ F350 SuperDuty 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1998-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTitan 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2004-2015\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eT-100 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1993-1999\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 95\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1000 Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 10-9548-CLB \/ 10-9548-CLS \/ TT10-9548-CLB \/ TT10-9548-CLS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 95\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2022+ Tundra 8' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 206 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 10-9548-CLB 856341006658; 10-9548-CLS 851274002708; TT10-9548-CLB 810059881037; TT10-9548-CLS 810059881044\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 206 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1000 Classic Truck Bed Cargo Slide, 95\" x 48\", 1,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107124060404,"sku":"10-9548-CLB","price":1880.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107124093172,"sku":"10-9548-CLS","price":1710.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (2022+ Tundra 8' Bed)","offer_id":49107124125940,"sku":"TT10-9548-CLB","price":2039.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2022+ Tundra 8' Bed)","offer_id":49107124158708,"sku":"TT10-9548-CLS","price":1869.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1000-classic-95x48-black-edition-extended-over-tailgate.jpg?v=1786369180"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-63-in-x-47-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 63\" x 47\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 63\" x 47\" version. BEDSLIDE lists this size for Suburban \/ Yukon XL - Cargo Door \u0026amp; Lift Gate (1992-2014), Ram 1500 5.7' Bed w\/RamBox (2009-Current) and Tundra 5.5' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 63\" x 47\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2022+ Tundra 5.5' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSuburban \/ Yukon XL - Cargo Door \u0026amp; Lift Gate\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1992-2014\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 63\"L x 47\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500 5.7' Bed w\/RamBox\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2009-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 63\"L x 47\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 5.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 63\"L x 47\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 63\" x 47\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-6347-CGB \/ 15-6347-CGS \/ TT15-6347-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 63\" x 47\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2022+ Tundra 5.5' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 15-6347-CGB 150 lb; 15-6347-CGS 150 lb; TT15-6347-CGS 170 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-6347-CGB 856341006825; 15-6347-CGS 851274002982\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 150 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 63\" x 47\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107125010676,"sku":"15-6347-CGB","price":2121.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107125043444,"sku":"15-6347-CGS","price":1908.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2022+ Tundra 5.5' Bed)","offer_id":49107125076212,"sku":"TT15-6347-CGS","price":2067.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-63x47-black-edition-studio-on-white.png?v=1786369188"},{"product_id":"bedslide-1500-max-extension-truck-bed-cargo-slide-63-in-x-47-in-black-15-6347-mxb","title":"BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 63\" x 47\", 1,500 lb, Black Edition (15-6347-MXB)","description":"\u003cp\u003eThe BEDSLIDE 1500 MAX Extension in 63\" x 47\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 1,500 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 339 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 MAX Extension cargo slide, 63\" x 47\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 MAX Extension is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 63\" x 47\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 63\" x 47\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 63\" x 47\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-6347-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 63\" x 47\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 339 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-6347-MXB 850001518574\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 339 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 63\" x 47\", 1,500 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107125534964,"sku":"15-6347-MXB","price":3298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-max-extension-63x47-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369191"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-65-in-x-48-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 65\" x 48\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 65\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 5.5' \u0026amp; 5.8' Beds (2004-2018), Ram 1500 5.7' Bed (2009-Current), F150 5.5' Bed (Includes Mark LT \/ Raptor) (2001-Current) and Titan 5.5' Bed (2004-2017), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 65\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 5.5' \u0026amp; 5.8' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2004-2018\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500 5.7' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2009-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 5.5' Bed (Includes Mark LT \/ Raptor)\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2001-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eTitan 5.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2004-2017\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 65\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-6548-CGB \/ 15-6548-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 65\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 163 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-6548-CGB 856341006818; 15-6548-CGS 851274002975\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 163 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 65\" x 48\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107126092020,"sku":"15-6548-CGB","price":2121.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107126124788,"sku":"15-6548-CGS","price":1908.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-65x48-black-edition-studio-on-white.png?v=1786369198"},{"product_id":"bedslide-1500-max-extension-truck-bed-cargo-slide-65-in-x-48-in-black-15-6548-mxb","title":"BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 65\" x 48\", 1,500 lb, Black Edition (15-6548-MXB)","description":"\u003cp\u003eThe BEDSLIDE 1500 MAX Extension in 65\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 1,500 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 339 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 MAX Extension cargo slide, 65\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 MAX Extension is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 65\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 65\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 65\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-6548-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 65\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 339 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-6548-MXB 850001518581\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 339 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 65\" x 48\", 1,500 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107126419700,"sku":"15-6548-MXB","price":3298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-max-extension-65x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369202"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-68-in-x-48-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 68\" x 48\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 68\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 5.9' Beds (2019-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 68\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 5.9' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2019-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 68\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 68\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-6848-CGB \/ 15-6848-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 68\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 165 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-6848-CGB 850001518055; 15-6848-CGS 850001518000\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 165 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 68\" x 48\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107127009524,"sku":"15-6848-CGB","price":2121.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107127042292,"sku":"15-6848-CGS","price":1908.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-68x48-black-edition-studio-on-white.png?v=1786369207"},{"product_id":"bedslide-1500-max-extension-truck-bed-cargo-slide-68-in-x-48-in-black-15-6848-mxb","title":"BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 68\" x 48\", 1,500 lb, Black Edition (15-6848-MXB)","description":"\u003cp\u003eThe BEDSLIDE 1500 MAX Extension in 68\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 1,500 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 355 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 MAX Extension cargo slide, 68\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 MAX Extension is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 68\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 68\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 68\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-6848-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 68\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 355 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-6848-MXB 850001518598\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 355 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 68\" x 48\", 1,500 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107127271668,"sku":"15-6848-MXB","price":3298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-max-extension-68x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369211"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-73-in-x-48-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 73\" x 48\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 73\" x 48\" version. BEDSLIDE lists this size for Ram 1500\/2500\/3500 6.4' Beds (Includes RamBox) (2002-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 73\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eRam 1500\/2500\/3500 6.4' Beds (Includes RamBox)\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2002-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 73\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 73\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-7348-CGB \/ 15-7348-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 73\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 160 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-7348-CGB 856341006801; 15-7348-CGS 856341006009\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 160 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 73\" x 48\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107127861492,"sku":"15-7348-CGB","price":2121.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107127894260,"sku":"15-7348-CGS","price":1908.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-73x48-black-edition-studio-on-white.png?v=1786369216"},{"product_id":"bedslide-1500-max-extension-truck-bed-cargo-slide-73-in-x-48-in-black-15-7348-mxb","title":"BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 73\" x 48\", 1,500 lb, Black Edition (15-7348-MXB)","description":"\u003cp\u003eThe BEDSLIDE 1500 MAX Extension in 73\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 1,500 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 378 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 MAX Extension cargo slide, 73\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 MAX Extension is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 73\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 73\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 73\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-7348-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 73\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 378 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-7348-MXB 850001518604\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 378 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 73\" x 48\", 1,500 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107128254708,"sku":"15-7348-MXB","price":3298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-max-extension-73x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369220"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-75-in-x-48-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 75\" x 48\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 75\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 6.5' \u0026amp; 6.6' Beds (1970-2018), Ram 1500\/2500\/3500 6.5' Beds (1981-2001), F150 \u0026amp; F-Series 6.5' Bed (1970-Current), Titan 6.5' Bed (2004-2016) and Tundra 6.5' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 75\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2022+ Tundra 6.5' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 6.5' \u0026amp; 6.6' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-2018\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500\/2500\/3500 6.5' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1981-2001\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 \u0026amp; F-Series 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eTitan 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2004-2016\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 75\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-7548-CGB \/ 15-7548-CGS \/ TT15-7548-CGB \/ TT15-7548-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 75\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2022+ Tundra 6.5' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 15-7548-CGB 170 lb; 15-7548-CGS 170 lb; TT15-7548-CGB 175 lb; TT15-7548-CGS 190 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-7548-CGB 856341006795; 15-7548-CGS 851274002999; TT15-7548-CGB 810059881136\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 170 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 75\" x 48\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107128811764,"sku":"15-7548-CGB","price":2121.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107128844532,"sku":"15-7548-CGS","price":1908.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (2022+ Tundra 6.5' Bed)","offer_id":49107128877300,"sku":"TT15-7548-CGB","price":2279.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2022+ Tundra 6.5' Bed)","offer_id":49107128910068,"sku":"TT15-7548-CGS","price":2067.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-75x48-black-edition-studio-on-white.png?v=1786369226"},{"product_id":"bedslide-1500-max-extension-truck-bed-cargo-slide-75-in-x-48-in-black-15-7548-mxb","title":"BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 75\" x 48\", 1,500 lb, Black Edition (15-7548-MXB)","description":"\u003cp\u003eThe BEDSLIDE 1500 MAX Extension in 75\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 1,500 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 380 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 MAX Extension cargo slide, 75\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 MAX Extension is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 75\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 75\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-7548-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 75\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 380 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-7548-MXB 850001518611\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 380 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 75\" x 48\", 1,500 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107129303284,"sku":"15-7548-MXB","price":3298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-max-extension-75x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369229"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-78-in-x-48-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 78\" x 48\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 78\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 6.9' Beds \/ HD (2019-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 78\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 6.9' Beds \/ HD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2019-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 78\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 78\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-7848-CGB \/ 15-7848-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 78\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 172 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-7848-CGB 850001518031; 15-7848-CGS 850001518048\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 172 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 78\" x 48\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107129794804,"sku":"15-7848-CGB","price":2121.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107129827572,"sku":"15-7848-CGS","price":1908.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-78x48-black-edition-studio-on-white.png?v=1786369234"},{"product_id":"bedslide-1500-max-extension-truck-bed-cargo-slide-78-in-x-48-in-black-15-7848-mxb","title":"BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 78\" x 48\", 1,500 lb, Black Edition (15-7848-MXB)","description":"\u003cp\u003eThe BEDSLIDE 1500 MAX Extension in 78\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 1,500 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 385 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 MAX Extension cargo slide, 78\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 MAX Extension is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 78\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 78\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 78\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-7848-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 78\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 385 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-7848-MXB 850001518628\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 385 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 MAX Extension Truck Bed Cargo Slide, 78\" x 48\", 1,500 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107130384628,"sku":"15-7848-MXB","price":3298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-max-extension-78x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369238"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-79-in-x-48-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 79\" x 48\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 79\" x 48\" version. BEDSLIDE lists this size for F250 \/ F350 SuperDuty 6.9' Bed (1998-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 79\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF250 \/ F350 SuperDuty 6.9' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1998-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 79\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 79\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-7948-CGB \/ 15-7948-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 79\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 200 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-7948-CGB 856341006788; 15-7948-CGS 851274002968\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 200 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 79\" x 48\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107130843380,"sku":"15-7948-CGB","price":2121.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107130876148,"sku":"15-7948-CGS","price":1908.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-79x48-black-edition-studio-on-white.png?v=1786369243"},{"product_id":"bedslide-1500-contractor-truck-bed-cargo-slide-95-in-x-48-in","title":"BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 95\" x 48\", 1,500 lb","description":"\u003cp\u003eThe BEDSLIDE 1500 Contractor is the original slide-out truck bed cargo tray, and this is the 95\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 8' Longbed (1970-Current), Ram 1500\/2500\/3500 8' Beds (1981-Current), F150 8' Bed (1970-Current), F250 \/ F350 SuperDuty 8' Bed (1998-Current), Titan 8' Bed (2004-2015), T-100 8' Bed (1993-1999) and Tundra 8' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 1,500 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical. No-drill factory mount bracket options are available on this product for the trucks that have the mounting points for them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 1500 Contractor cargo slide, 95\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003cli\u003eNo-drill factory mount bracket kit, on the no-drill install kit variants only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/y5ZI5oo2XuA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1,500 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 1500 Contractor is rated to carry 1,500 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take tools, materials and site gear on a working truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Factory Mount Brackets Available\u003c\/strong\u003e\u003cbr\u003eSome trucks have factory mounting points that let a BEDSLIDE go in without drilling the bed floor. On this product that is offered as an install kit option: No-Drill Brackets (2022+ Tundra 8' Bed). The bracket bundle is the same tray with the correct bracket set in the carton, and it fits the standard drill-in way as well if you ever move it to a different truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 8' Longbed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500\/2500\/3500 8' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1981-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eF250 \/ F350 SuperDuty 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1998-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTitan 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2004-2015\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eT-100 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1993-1999\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 95\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in. The no drill bracket options on this product are additional mounting hardware for specific trucks and they do not change which beds the tray itself fits.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 1500 Contractor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 15-9548-CGB \/ 15-9548-CGS \/ TT15-9548-CGB \/ TT15-9548-CGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 1,500 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 95\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (2) 3,282 lb static rated cam-follower bearings on the load bearing end with (2) sealed ball roller guide bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e 32\" wide grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Kit Options:\u003c\/b\u003e Standard Drill-In \/ No-Drill Brackets (2022+ Tundra 8' Bed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 15-9548-CGB 230 lb; 15-9548-CGS 230 lb; TT15-9548-CGB 250 lb; TT15-9548-CGS 250 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 15-9548-CGB 856341006771; 15-9548-CGS 851274002951; TT15-9548-CGB 810059881129\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor, or a no-drill installation using the factory mounting points on the no-drill bracket variants  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 230 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it. If you have ordered a no-drill bracket variant, follow the no-drill film and the bracket instructions instead of drilling the bed floor.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 1500 Contractor Truck Bed Cargo Slide, 95\" x 48\", 1,500 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107131334900,"sku":"15-9548-CGB","price":2193.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107131367668,"sku":"15-9548-CGS","price":1980.0,"currency_code":"USD","in_stock":true},{"title":"Black Edition \/ No-Drill Brackets (2022+ Tundra 8' Bed)","offer_id":49107131400436,"sku":"TT15-9548-CGB","price":3235.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ No-Drill Brackets (2022+ Tundra 8' Bed)","offer_id":49107131433204,"sku":"TT15-9548-CGS","price":2813.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-1500-contractor-95x48-black-edition-studio-on-white.png?v=1786369249"},{"product_id":"bedslide-2000-heavy-duty-truck-bed-cargo-slide-75-in-x-48-in","title":"BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 75\" x 48\", 2,000 lb","description":"\u003cp\u003eThe BEDSLIDE 2000 Heavy Duty is the original slide-out truck bed cargo tray, and this is the 75\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 6.5' \u0026amp; 6.6' Beds (1970-2018), Ram 1500\/2500\/3500 6.5' Beds (1981-2001), F150 \u0026amp; F-Series 6.5' Bed (1970-Current), Titan 6.5' Bed (2004-2016) and Tundra 6.5' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 2,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 2000 Heavy Duty cargo slide, 75\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 2000 Heavy Duty is rated to carry 2,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take pallet weight, tooling and fleet gear day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (4) 3,282 lb static rated cam-follower bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 6.5' \u0026amp; 6.6' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-2018\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500\/2500\/3500 6.5' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1981-2001\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 \u0026amp; F-Series 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eTitan 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e2004-2016\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 6.5' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 75\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 2000 Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 20-7548-HDB \/ 20-7548-HDS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 2,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 75\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (4) 3,282 lb static rated cam-follower bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 224 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 20-7548-HDB 856341006856; 20-7548-HDS 851274002869\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 224 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 75\" x 48\", 2,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107132023028,"sku":"20-7548-HDB","price":2410.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107132055796,"sku":"20-7548-HDS","price":2155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-2000-heavy-duty-75x48-black-edition-studio-on-white.png?v=1786369255"},{"product_id":"bedslide-2000-max-extension-truck-bed-cargo-slide-75-in-x-48-in-black-20-7548-mxb","title":"BEDSLIDE 2000 MAX Extension Truck Bed Cargo Slide, 75\" x 48\", 2,000 lb, Black Edition (20-7548-MXB)","description":"\u003cp\u003eThe BEDSLIDE 2000 MAX Extension in 75\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 2,000 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 409 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 2000 MAX Extension cargo slide, 75\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 2000 MAX Extension is rated to carry 2,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take pallet weight, tooling and fleet gear day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 75\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 75\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 2000 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 20-7548-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 2,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 75\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 409 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 20-7548-MXB 850001518536\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 409 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 2000 MAX Extension Truck Bed Cargo Slide, 75\" x 48\", 2,000 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107132481780,"sku":"20-7548-MXB","price":3414.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-2000-max-extension-75x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369259"},{"product_id":"bedslide-2000-heavy-duty-truck-bed-cargo-slide-78-in-x-48-in","title":"BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 78\" x 48\", 2,000 lb","description":"\u003cp\u003eThe BEDSLIDE 2000 Heavy Duty is the original slide-out truck bed cargo tray, and this is the 78\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 6.9' Beds \/ HD (2019-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 2,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 2000 Heavy Duty cargo slide, 78\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 2000 Heavy Duty is rated to carry 2,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take pallet weight, tooling and fleet gear day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (4) 3,282 lb static rated cam-follower bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 6.9' Beds \/ HD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2019-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 78\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 78\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 2000 Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 20-7848-HDB \/ 20-7848-HDS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 2,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 78\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (4) 3,282 lb static rated cam-follower bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 230 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 20-7848-HDB 850001518017; 20-7848-HDS 850001518024\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 230 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 78\" x 48\", 2,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107133006068,"sku":"20-7848-HDB","price":2410.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107133038836,"sku":"20-7848-HDS","price":2155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-2000-heavy-duty-78x48-black-edition-studio-on-white.png?v=1786369264"},{"product_id":"bedslide-2000-max-extension-truck-bed-cargo-slide-78-in-x-48-in-black-20-7848-mxb","title":"BEDSLIDE 2000 MAX Extension Truck Bed Cargo Slide, 78\" x 48\", 2,000 lb, Black Edition (20-7848-MXB)","description":"\u003cp\u003eThe BEDSLIDE 2000 MAX Extension in 78\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 2,000 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 424 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 2000 MAX Extension cargo slide, 78\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 2000 MAX Extension is rated to carry 2,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take pallet weight, tooling and fleet gear day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 78\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 78\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 78\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 2000 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 20-7848-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 2,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 78\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 424 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 20-7848-MXB 850001518543\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 424 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 2000 MAX Extension Truck Bed Cargo Slide, 78\" x 48\", 2,000 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107133432052,"sku":"20-7848-MXB","price":3414.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-2000-max-extension-78x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369269"},{"product_id":"bedslide-2000-heavy-duty-truck-bed-cargo-slide-79-in-x-48-in","title":"BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 79\" x 48\", 2,000 lb","description":"\u003cp\u003eThe BEDSLIDE 2000 Heavy Duty is the original slide-out truck bed cargo tray, and this is the 79\" x 48\" version. BEDSLIDE lists this size for F250 \/ F350 SuperDuty 6.9' Bed (1998-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 2,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 2000 Heavy Duty cargo slide, 79\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 2000 Heavy Duty is rated to carry 2,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take pallet weight, tooling and fleet gear day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (4) 3,282 lb static rated cam-follower bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF250 \/ F350 SuperDuty 6.9' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1998-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 79\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 79\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 2000 Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 20-7948-HDB \/ 20-7948-HDS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 2,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 79\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (4) 3,282 lb static rated cam-follower bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 242 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 20-7948-HDB 856341006849; 20-7948-HDS 851274002852\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 242 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 79\" x 48\", 2,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107134415092,"sku":"20-7948-HDB","price":2410.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107134447860,"sku":"20-7948-HDS","price":2155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-2000-heavy-duty-79x48-black-edition-studio-on-white.png?v=1786369275"},{"product_id":"bedslide-2000-heavy-duty-truck-bed-cargo-slide-95-in-x-48-in","title":"BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 95\" x 48\", 2,000 lb","description":"\u003cp\u003eThe BEDSLIDE 2000 Heavy Duty is the original slide-out truck bed cargo tray, and this is the 95\" x 48\" version. BEDSLIDE lists this size for Silverado \/ Sierra 8' Longbed (1970-Current), Ram 1500\/2500\/3500 8' Beds (1981-Current), F150 8' Bed (1970-Current), F250 \/ F350 SuperDuty 8' Bed (1998-Current), Titan 8' Bed (2004-2015), T-100 8' Bed (1993-1999) and Tundra 8' Bed (2007-Current), so if you run one of those trucks this is the tray that was sized for it. The deck runs out to 75% of its length on cam-follower bearings, so the load comes to you at the tailgate instead of you climbing over the rail to get at whatever slid to the bulkhead. It is rated to 2,000 lb evenly distributed, the deck is BEDSLIDE's WEATHERDECK composite rather than plywood, and the full perimeter guardrail kit with its headboard section, the BEDTRAX T-slot rails and four D-ring tie-downs are all in the box rather than on the options list. It sits 4.5\" above the bed floor and locks in multiple positions, so you can run it part way out and leave it there under load. Choose the bright anodized Silver finish or the powder coated Black Edition from the variant selector; the tray underneath is identical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 2000 Heavy Duty cargo slide, 95\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit with headboard section\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 2000 Heavy Duty is rated to carry 2,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take pallet weight, tooling and fleet gear day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e75% Extension That Brings the Load to You\u003c\/strong\u003e\u003cbr\u003eThe deck runs out to 75% of its length, so the load comes to you at the tailgate instead of you climbing over the rail to reach the bulkhead. BEDSLIDE runs 75% on the 1000 Classic, the 1500 Contractor and the 2000 Heavy Duty alike; it does not scale with capacity. If you want the deck to come all the way out, that is the MAX Extension range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerimeter Guardrail and Headboard Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck and includes the headboard section that keeps a load off the cab end, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCam-Follower Bearings and Multiple Locking Positions\u003c\/strong\u003e\u003cbr\u003eThe tray rides on (4) 3,282 lb static rated cam-follower bearings. It locks in multiple positions rather than only open or shut, so you can pull it out as far as the job needs and leave it there under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack Edition or Silver, Same Tray\u003c\/strong\u003e\u003cbr\u003eThe two finishes are the same slide. Silver leaves the frame and rails in bright anodized aluminum; the Black Edition powder coats them to match a black bed. Capacity, extension, bearings, deck and warranty are identical, so choose on looks and pick the finish from the variant selector above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA and backs them with a 5 year warranty as standard, which becomes a lifetime warranty if you register the product within 30 days of purchase. The lifetime cover stays with the original owner and does not transfer if the truck is sold.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eBed size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eCHEVROLET \/ GMC\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eSilverado \/ Sierra 8' Longbed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eDODGE\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eRam 1500\/2500\/3500 8' Beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1981-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eF150 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e1970-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFORD\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eF250 \/ F350 SuperDuty 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1998-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eNISSAN\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTitan 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2004-2015\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003eT-100 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e1993-1999\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTOYOTA\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003eTundra 8' Bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e2007-Current\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 95\"L x 48\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE is fitted by bed size rather than by a vehicle specific kit. The trucks above are the applications BEDSLIDE lists for the 95\" x 48\" tray in its own Application Guide. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 2000 Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 20-9548-HDB \/ 20-9548-HDS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 2,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 75% of deck length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 95\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 4.5\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e (4) 3,282 lb static rated cam-follower bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included with headboard\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrab Bar:\u003c\/b\u003e Full width grab bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition or Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 280 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 20-9548-HDB 856341006832; 20-9548-HDS 851274002845\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty, lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 280 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 2000 Heavy Duty Truck Bed Cargo Slide, 95\" x 48\", 2,000 lb, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Original owner only and not transferable on resale. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Black Edition \/ Standard Drill-In","offer_id":49107135037684,"sku":"20-9548-HDB","price":2410.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard Drill-In","offer_id":49107135070452,"sku":"20-9548-HDS","price":2237.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-2000-heavy-duty-95x48-black-edition-studio-on-white.png?v=1786369281"}],"url":"https:\/\/prestigetruck.com\/collections\/truck-bed-slides.oembed","provider":"Prestige Truck","version":"1.0","type":"link"}