{"product_id":"baja-designs-squadron-pro-a-pillar-light-kit-2019-2023-ford-ranger-447629","title":"Baja Designs Squadron Pro A-Pillar Light Kit for 2019-2023 Ford Ranger","description":"\u003cp\u003eBuilt around the A-pillars of the 2019-2023 Ford Ranger, the Squadron Pro A-Pillar Light Kit adds two Squadron-family pods that see over the hood. In the box: two Squadron Pro pods (spot beam), plus brackets and wiring. It is Baja Designs part 447629. Fit note: Relay harness with toggle switch; no drilling or cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Squadron Pro pods (spot beam)\u003c\/li\u003e\n\u003cli\u003eA-Pillar Brackets (x2)\u003c\/li\u003e\n\u003cli\u003eWiring Harness 640117\u003c\/li\u003e\n\u003cli\u003eThe mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrackets Made for This Vehicle\u003c\/strong\u003e\u003cbr\u003eThe mounts follow this vehicle's windshield pillar or cowl, so the lights tuck in close to the body instead of hanging from a universal clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Mount, Wide View\u003c\/strong\u003e\u003cbr\u003eLights at windshield height reach past the hood and throw light across both sides of the trail, where corners and obstacles show up first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSquadron Pods in the Kit\u003c\/strong\u003e\u003cbr\u003eEach kit comes with a pair of Baja Designs Squadron-series pods, the 3\" cube that fits tight pillar brackets; the series, pattern and count are in the kit name and spec rows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLens Patterns by Lighting Zone\u003c\/strong\u003e\u003cbr\u003eBaja Designs sorts its patterns by Lighting Zone: Spot for distance, Driving\/Combo to blend reach with spread, Wide Cornering for the sides of the trail and Work\/Scene for close-up light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Against Water and Dust\u003c\/strong\u003e\u003cbr\u003eBaja Designs seals its lights with O-rings rather than silicone beads and rates them IP69K, so rain, pressure washing and river crossings stay outside the housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifetime Limited Warranty\u003c\/strong\u003e\u003cbr\u003eThe lights carry Baja Designs' limited lifetime warranty for recreational use plus its 30-day satisfaction guarantee; brackets and harnesses carry their maker's warranty.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-447629 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-447629\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-447629\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-447629 .pt-fit__tabs{display:none}#fit-447629 .pt-fit__p{display:block!important}#fit-447629 .pt-fitw{overflow:visible!important}#fit-447629 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2019-2023\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your vehicle:\u003c\/strong\u003e 2019-2023 Ford Ranger.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eFit notes:\u003c\/strong\u003e Relay harness with toggle switch; no drilling or cutting.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e Years, models and trims that are not in the fit table; see the fit notes for equipment it excludes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Baja Designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e 447629\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct type:\u003c\/b\u003e Vehicle-specific A-pillar light kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount location:\u003c\/b\u003e Windshield A-pillar \/ cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRoad use:\u003c\/b\u003e Baja Designs notes that some of its lights may only be used off-road. Check the lighting laws where you drive before using this light on public roads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e 2019-2023 Ford Ranger\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime on Baja Designs lights for recreational use (or 49,930 hours, whichever comes first); brackets, harnesses and switches carry their maker's pass-through warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 819314029702\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Not stated by Baja Designs · \u003cb\u003eTime:\u003c\/b\u003e Not stated by Baja Designs · \u003cb\u003eTools:\u003c\/b\u003e 13mm Socket Wrench, 9\/16\" Wrench, Standard Screwdriver (Flathead), 9\/16\" Socket Wrench, 4mm Allen Wrench · \u003cb\u003eDifficulty:\u003c\/b\u003e Not stated by Baja Designs\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow Baja Designs' install sheet (below) for your vehicle's exact positions, wiring and hardware.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eLocate the upper hood hinge bolts; the A-pillar brackets mount on them.\u003c\/li\u003e\n\u003cli\u003ePut masking tape along the hood hinges so they realign correctly, and along the back edge of the hood near the windshield to prevent scratches while aligning the bracket.\u003c\/li\u003e\n\u003cli\u003eHave an assistant hold the upper hood hinge against the hood so it cannot move, then remove the nuts with a 13mm socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlace the driver side bracket over the hood studs and hand-tighten the nuts.\u003c\/b\u003e Make sure the bracket clears the back edge of the hood and the hinge lines up with the tape, then tighten the nuts snug.\u003c\/li\u003e\n\u003cli\u003eAssemble the Squadron lights to their brackets with the supplied parts bags, following the exploded view.\u003c\/li\u003e\n\u003cli\u003eClose the hood, mount the lights to the A-pillar brackets with a 9\/16\" wrench and socket, aim them and tighten. Re-torque all fasteners after 100 miles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/baja-designs-install-fgxx_447629-ins_001.pdf?v=1791453703\" target=\"_blank\" rel=\"noopener\"\u003eBaja Designs installation sheet (PDF)\u003c\/a\u003e, Baja Designs' own install guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Baja Designs backs its LED light bars and auxiliary lights with a limited lifetime warranty for recreational use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecreational automotive and off-road use: limited lifetime or 49,930 hours of operation, whichever comes first. Commercial use (agriculture, industrial, mining and public safety): 5 years or 49,930 hours. The term starts on the date the product ships.\u003c\/li\u003e\n\u003cli\u003eCoverage is for defects in design and manufacturing, for the original owner with proof of purchase or product registration. Baja Designs repairs or replaces the product or issues credit, at its option, and may substitute a similar product of comparable value if the original is no longer made.\u003c\/li\u003e\n\u003cli\u003eNot covered: installation errors, wear and tear, acts of God, misuse, abuse, neglect, accidents, collisions, and any modification or combination Baja Designs did not perform. Labor to remove or reinstall a warranty part is not paid.\u003c\/li\u003e\n\u003cli\u003eBrackets, wiring harnesses and switches that Baja Designs resells carry their own maker's warranty, which Baja Designs passes through to you.\u003c\/li\u003e\n\u003cli\u003eA claim starts with Baja Designs technical support, who troubleshoot first; if a part has to come back, they issue an RMA number, and Baja Designs covers return freight when the defective part is sent back within 90 days of delivery.\u003c\/li\u003e\n\u003cli\u003eBaja Designs also gives a 30-day satisfaction guarantee on its LED lights, light bars and LED lighting accessories; a dealer purchase is returned through the dealer, in new, resalable condition.\u003c\/li\u003e\n\u003cli\u003eContact us for claims and registration help, and we will take it up with Baja Designs for you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Free to the lower 48 states, no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and processing starts the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email tracking as soon as the order ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Open the carton when it arrives and check every light, bracket, harness and hardware bag against the kit contents before you start. Report shipping damage or a missing part right away, before anything is mounted. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout Baja Designs\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.04em;color:#14161a;\"\u003eBAJA \u003cspan style=\"color:#ba232a;\"\u003eDESIGNS\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eBaja Designs started in San Diego, California in 1992, founded by riders who raced the Baja 1000. Its engineers tuned race lights for night stages, which earned them the nickname The Scientists of Lighting, and in 2005 the company ran its first forward-projecting LED light bar in the Baja 1000.\u003c\/p\u003e\n\u003cp\u003eToday Baja Designs lights trucks, Jeeps, SUVs, vans, UTVs and motorcycles. Its Lighting Zones method matches the lens pattern to the job and the mounting spot on the vehicle: dust and fog, cornering, driving, spot, rock and cargo, and reverse. Baja Designs is part of the Bestop Premium Accessories Group.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized Baja Designs dealer.\u003c\/strong\u003e Prestige Truck is an authorized Baja Designs dealer. Baja Designs says its full limited warranty does not apply to lights bought from unauthorized marketplace sellers; a purchase here carries it, and you can bring any claim to us first.\u003c\/p\u003e\u003c\/div\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":67740914974964,"sku":"447629","price":604.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/baja-designs-squadron-pro-a-pillar-light-kit-two-squadron-pro-led-pods-with-clear-1_0097214a-0b27-40d1-b856-4b206b2dfed5.jpg?v=1791455500","url":"https:\/\/prestigetruck.com\/products\/baja-designs-squadron-pro-a-pillar-light-kit-2019-2023-ford-ranger-447629","provider":"Prestige Truck","version":"1.0","type":"link"}