{"product_id":"bak-revolver-x4-ts-rack-rail-kit","title":"BAK Revolver X4 TS Rack Rail Kit","description":"\u003cp\u003eThese are the T-slot rack rails that make a BAK Revolver X4 TS rack-ready, sold on their own as a matched pair. If a rail on your cover was damaged in a parking garage, went missing when the truck changed hands, or you bought an X4 TS cover without its rails, this is the kit that puts the rack capability back. Rails only; the roll-up cover is not included. This page is the hub for the whole rail kit range. Pick your truck below and we will route you to the pair matched to your cover.\u003c\/p\u003e\n\u003cp\u003eA rail kit is a system-fit part rather than a vehicle-fit part. The rails are cut to the length of a specific X4 TS cover, so what you are really matching is the cover you already own, and the truck selector is how we get you to that cover's rail set. Each kit ships as a pair, driver and passenger, with the clamp hardware needed to mount them.\u003c\/p\u003e\n\u003cp\u003eWhat the rails do is the same on every truck. Full-length T-slot channels run down both sides of the cover and accept standard T-slot rack hardware: crossbars, cargo baskets, bike and kayak carriers, ladder racks, and roof-top tents, all sold separately. Because the channels are machined into the cover's own rails rather than bolted over the bed sides, anything you mount to them starts lower and reads cleaner on the truck.\u003c\/p\u003e\n\u003cp\u003eInstallation matches the cover itself. The rails clamp to your factory bed rails with the included hardware, so there is no cutting and no drilling, and most people are done in twenty to forty minutes with basic hand tools. Follow the BAK Revolver install sheet for clamp placement and torque, and mount rack hardware only after the rails are fully tightened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePair of BAK Revolver X4 TS T-slot rack rails, driver and passenger\u003c\/li\u003e\n\u003cli\u003eClamp and mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstall instructions\u003c\/li\u003e\n\u003cli\u003e(Roll-up cover not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/YlDumwaHX1k\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIntegrated T-Slot Rack Rails\u003c\/strong\u003e\u003cbr\u003eThe full-length T-slot channels are what make the X4 TS rack-ready. They accept crossbars, bike and kayak carriers, cargo baskets, ladder racks, and roof-top tents, so you can carry gear over the closed cover while the bed stays covered and locked underneath.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Replacement Fit\u003c\/strong\u003e\u003cbr\u003eEach kit is cut and drilled to match a specific X4 TS cover, and it clamps to the same factory bed rails as the original set. That makes it a direct swap rather than a universal rail you have to adapt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold as a Matched Pair\u003c\/strong\u003e\u003cbr\u003eRails ship driver and passenger together with the clamp hardware. Rack systems load both sides, so a single rail is not a useful part, and matching a replacement to an existing rail is not something we ask customers to do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-Drill Clamp-On Install\u003c\/strong\u003e\u003cbr\u003eThe rails clamp to your factory bed rails with the included hardware, so there is no cutting, trimming, or drilling. Basic hand tools and the BAK Revolver install sheet are all you need, and most kits go on in twenty to forty minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatte Black to Match the Cover\u003c\/strong\u003e\u003cbr\u003eThe rails carry the same matte black finish as the Revolver X4 TS cover and its clamps, so a replacement pair blends with the rest of the system instead of standing out as a repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRails Only, Clearly\u003c\/strong\u003e\u003cbr\u003eThis is a component kit and we would rather be blunt about it than have you open a smaller box than you expected. You get two rails and hardware. If you need the cover as well, buy the complete Revolver X4 TS instead, which ships with its rails included.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:16px 18px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFind your truck.\u003c\/strong\u003e These rack rails are a system-fit part sold as matched pairs for a specific BAK Revolver X4 TS cover. We stock 57 rail sets. Select your truck to get the pair cut for your cover and its price.\u003c\/p\u003e\u003c\/div\u003e\n\u003cp\u003eSelect your year, make, model and bed above to see the exact cover for your truck, its price, and a confirmed fit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Replacement and upgrade T-slot rack rail set for the BAK Revolver X4 TS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncludes:\u003c\/b\u003e Pair of T-slot rails plus clamp hardware (cover not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRack Compatibility:\u003c\/b\u003e Accepts standard T-slot crossbars, carriers, cargo baskets, and roof-top tents (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black, matched to the Revolver X4 TS cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall:\u003c\/b\u003e No-drill, clamp-on to the factory bed rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Time:\u003c\/b\u003e About 20 to 40 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePairs With:\u003c\/b\u003e The matching BAK Revolver X4 TS cover for your truck and bed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail Lengths Offered:\u003c\/b\u003e Cut to each X4 TS cover length; select your truck for the matched pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e No-drill, clamp-on to the factory bed rails  ·  \u003cb\u003eTime:\u003c\/b\u003e About 20 to 40 minutes  ·  \u003cb\u003eTools:\u003c\/b\u003e Basic hand tools; no drilling required  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e DIY-friendly\u003c\/p\u003e\n\u003cp\u003eEvery rail kit installs the same way. Clamp each T-slot rail to the factory bed rail and tighten evenly, then refit the cover. Follow the BAK Revolver install sheet for clamp placement and torque. If you are replacing a damaged rail, remove the cover first so you can lift the old rail out cleanly.\u003c\/p\u003e\n\u003cp\u003eWatch the model-specific installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ba2Mm_4F3YQ\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BAK Revolver X4 TS Rack Rail Kit, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bak-revolver-x4ts-replacement-rail-set-install-guide.pdf?v=1785164296\" target=\"_blank\" rel=\"noopener\" title=\"Download the official BAK Industries installation guide for the BAK Revolver X4 TS Rack Rail Kit, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial BAK Revolver X4 TS Rack Rail Kit installation guide (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5-Year Limited Warranty from BAK Industries against defects in materials and workmanship. It does not cover accident damage, neglect, or improper installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BAK Industries\u003c\/h3\u003e\n\u003cp\u003eBAK Industries has engineered premium truck bed covers in the USA for decades and is a flagship tonneau brand of RealTruck, one of the largest truck-accessory manufacturers in North America. Its hard-folding BAKFlip and retractable Revolver lines set the benchmark for the category, pairing heavy-duty aluminum construction with a low-profile, weathertight design.\u003c\/p\u003e\n\u003cp\u003eEvery BAK cover is built for real-world truck use: no-drill, clamp-on installation that mounts in about 30 minutes, full bed access when folded or rolled back, and reinforced latching that keeps cargo secure and dry. The lineup runs from the value-focused BAKFlip MX4 and G2, to the flagship FRP-panel F1 and FiberMax, to the industrial Revolver X2 and X4s roll-ups, covering nearly every popular truck and bed length.\u003c\/p\u003e\n\u003cp\u003eBacked by US-based product support and a multi-year manufacturer warranty, a BAK cover is a buy-it-once upgrade that protects tools, cargo, and gear while giving a truck a cleaner, more finished look.\u003c\/p\u003e\n\u003cdiv style=\"background:#f7f4f2;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:16px 18px;margin:16px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized BAK Industries dealer.\u003c\/strong\u003e Prestige Truck is an authorized dealer of BAK Industries, so every tonneau cover and accessory you buy is 100% genuine and factory-new, covered by the full BAK Industries manufacturer warranty, and backed by our own US-based support team.\u003c\/p\u003e\u003c\/div\u003e","brand":"BAK Industries","offers":[{"title":"Default Title","offer_id":48896242909428,"sku":"BAK-PARENT-RAILS","price":429.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/BAK-Revolver-X4-TS-Rack-Rail-Kit-bak-revolver-x4-ts-rack-rail-kit-matched-pair-of-side-rails-studio-view_9dbbbf4c-b5f8-4a74-8539-4b68a5fd68d7.jpg?v=1784771014","url":"https:\/\/prestigetruck.com\/products\/bak-revolver-x4-ts-rack-rail-kit","provider":"Prestige Truck","version":"1.0","type":"link"}