{"product_id":"bak-revolver-x4ts-t-slot-rail-kit-2004-2014-ford-f-150-8-ft-bed-80308rk","title":"BAK Revolver X4ts Replacement T-Slot Rail Kit for 2004-2014 Ford F-150 (8' Bed)","description":"\u003cp\u003eThis BAK Revolver X4ts Replacement T-Slot Rail Kit fits the 2004-2014 Ford F-150 with the 8' bed. It is for owners replacing the rails that carry a Revolver X4ts cover. These T-slot rails make the X4ts rack-ready and are not interchangeable with plain Revolver X4s rails. The pair arrives fully assembled and clamps in at the cab, middle and tailgate end with no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 inner rails and 2 outer rails, fully assembled\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eSpring actuators\u003c\/li\u003e\n\u003cli\u003eLocking levers\u003c\/li\u003e\n\u003cli\u003e2 spacer shims and 8 angle shims (if necessary)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSold as a Set of Two\u003c\/strong\u003e\u003cbr\u003eBoth side rails in one box. BAK sells this component only as a set of two, fully assembled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Assembled Rails\u003c\/strong\u003e\u003cbr\u003eEach set comes with the inner and outer rails, mounting plate, spring actuators and locking levers already put together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShims Where Needed\u003c\/strong\u003e\u003cbr\u003eTwo spacer shims and eight angle shims are included when your truck needs them to sit the rails square.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClamps Sold Separately\u003c\/strong\u003e\u003cbr\u003eThe set does not include clamps. BAK's rail sheet mounts the new rails with clamps at the front, middle and rear of each rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade for One Truck\u003c\/strong\u003e\u003cbr\u003eEach rail set is vehicle specific, matched to one truck and bed length, like the cover it goes under.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eX4ts T-Slot Rails\u003c\/strong\u003e\u003cbr\u003eThese are the rails for the Revolver X4ts, the version with T-slot rails for racks and cargo accessories, not the plain X4s or X2 rails.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-rails-80308rk .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-rails-80308rk\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-rails-80308rk\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-rails-80308rk .pt-fit__tabs{display:none}#fit-rails-80308rk .pt-fit__p{display:block!important}#fit-rails-80308rk .pt-fitw{overflow:visible!important}#fit-rails-80308rk .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2004\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e8'\u003c\/td\u003e\n\u003ctd class=\"n\"\u003eNew Body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2005-2007\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e8'\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2008-2014\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e8'\u003c\/td\u003e\n\u003ctd class=\"n\"\u003ew\/o Cargo Management System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your bed:\u003c\/strong\u003e measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 8' bed on the 2004-2014 Ford F-150; BAK lists the bed by that label and publishes no inch figure. Fit notes from BAK: new body style (2004 F-150); without the factory cargo management system (2008-2014 F-150).\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e the 6'7\" bed (X4ts rail set RAILS-80307RK, 2004-2014) and the 5'7\" bed (X4ts rail set RAILS-80309RK, 2004-2014). 2015-2020 Ford F-150 trucks with the same bed use X4ts rail set RAILS-80328RK.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e BAK\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e RAILS-80308RK\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct:\u003c\/b\u003e Replacement side rail set for the Revolver X4ts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e Set of two (driver and passenger), fully assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncludes:\u003c\/b\u003e 2 inner rails, 2 outer rails, mounting plate, spring actuators, locking levers, 2 spacer shims and 8 angle shims (if necessary)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e Not included (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Length:\u003c\/b\u003e 8'\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eWhat's involved:\u003c\/b\u003e Cover comes off, the new rail clamps to the bed and the cover sets back on, no drilling · \u003cb\u003eTools:\u003c\/b\u003e 9\/16\" wrench or socket (torque wrench to set 10 ft-lb)\u003c\/p\u003e\n\u003cp\u003eHere's the short version. BAK's rail sheet (below) starts with the cover off the truck and the old rails removed.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eTake the cover off.\u003c\/b\u003e BAK's sheet starts with the cover off the truck and the current rails removed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSet the new rail.\u003c\/b\u003e Place the new passenger rail on the bed rail with the slotted bracket pushed all the way to the cab and the bulkhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp it.\u003c\/b\u003e First clamp about 6\" to 9\" back from the front, the strap clamp as far forward as possible, the second clamp near the middle (two on 8' beds) and the third about 12\" from the tailgate. Hand-tighten them all, then torque every clamp to 10 ft-lb with a 9\/16\" socket while pressing the rail down. Repeat on the driver side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSet the cover on the rails.\u003c\/b\u003e Rest the rolled cover on the rails at the cab, roll it toward the tailgate and throw away the packaging. Fold the front panel back, drop the two mounting bolts on each side into the slotted brackets, then fit the rubber washer, large flat washer and lock knob underneath, loosely for now.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSquare it up.\u003c\/b\u003e Roll the cover open and closed a few times so it runs freely. Line up the front vinyl edge with the front of the rails (not the rubber seal) and keep a gap of about 1\/8\" (3.2 mm) on each side. Both slam latches must meet the locking levers squarely at the tailgate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLock it in.\u003c\/b\u003e Roll the cover open without knocking it out of line and tighten the knobs by hand only. Close it and check the locking levers hold it down on both sides. Hook both straps whenever you drive with the cover rolled open.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bak-revolver-x4ts-replacement-rail-set-install-guide.pdf?v=1785164296\" target=\"_blank\" rel=\"noopener\"\u003eBAK Revolver X4ts Replacement Rail Set Installation Sheet (PDF)\u003c\/a\u003e, BAK's own step-by-step guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e BAK lists a 30-day warranty for BAK replacement rail sets (\"30 Day Warranty\").\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBAK publishes no other warranty terms for rail sets.\u003c\/li\u003e\n\u003cli\u003eBAK's claim process applies: proof of purchase must accompany every claim, and BAK accepts no returns without its prior authorization; contact us for help with registration or a claim.\u003c\/li\u003e\n\u003cli\u003eA claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eThis rail set is an oversized item, so it ships by freight or as an oversized parcel.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e This rail set ships in a long box. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout BAK Industries\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 26px\/1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eBAK\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eBAK makes hard tonneau covers. BAK bills itself as \"America's #1 truck bed cover.\"\u003c\/p\u003e\n\u003cp\u003eThe range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4ts). These rail sets fit the Revolver X4ts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized BAK dealer.\u003c\/strong\u003e Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty \"is nontransferable and applies to the original purchaser of the BAK product only,\" and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.\u003c\/p\u003e\u003c\/div\u003e","brand":"BAK Industries","offers":[{"title":"Default Title","offer_id":67811525689588,"sku":"BAKRAILS-80308RK","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bak-replacement-rail-assembly-sets-rt-01.jpg?v=1792130528","url":"https:\/\/prestigetruck.com\/products\/bak-revolver-x4ts-t-slot-rail-kit-2004-2014-ford-f-150-8-ft-bed-80308rk","provider":"Prestige Truck","version":"1.0","type":"link"}