{"product_id":"bedslide-2000-max-extension-truck-bed-cargo-slide-75-in-x-48-in-black-20-7548-mxb","title":"BEDSLIDE 2000 MAX Extension Truck Bed Cargo Slide, 75\" x 48\", 2,000 lb, Black Edition (20-7548-MXB)","description":"\u003cp\u003eThe BEDSLIDE 2000 MAX Extension in 75\" x 48\" is the version of this tray for people who are tired of climbing into the bed. Where the Classic, Contractor and Heavy Duty trays run out to 75% of their length, the MAX runs out to 100%: the deck clears the tailgate completely, so the far end of the load finishes up in front of you rather than an arm's reach inside the truck. It carries 2,000 lb evenly distributed on a WEATHERDECK composite deck with BEDTRAX rails, four D-ring tie-downs and the full perimeter guardrail kit included, and it rides on heavy duty cam-follower bearings with a hard latch so it will hold that load out at full stretch. The trade is height and weight: the MAX sits on a 7\" profile rather than the 4.5\" of the other series, and at 409 lb it is a two person install. It is offered in the Black Edition finish only, and it is covered by a 5 year warranty rather than the lifetime-with-registration term the other BEDSLIDE series carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBEDSLIDE 2000 MAX Extension cargo slide, 75\" x 48\"\u003c\/li\u003e\n\u003cli\u003eFull perimeter guardrail kit\u003c\/li\u003e\n\u003cli\u003eBEDTRAX T-slot rails\u003c\/li\u003e\n\u003cli\u003e(4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003eMounting hardware for a standard drill-in installation\u003c\/li\u003e\n\u003cli\u003eBEDSLIDE assembly and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_e2kl6KgaA\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e2,000 lb of Evenly Distributed Capacity\u003c\/strong\u003e\u003cbr\u003eThe 2000 MAX Extension is rated to carry 2,000 lb spread across the deck. Evenly distributed is the operative phrase and it is worth reading literally: the rating assumes the load is spread over the tray rather than stacked on one corner or concentrated over the extended end. Loaded that way, this tray will take pallet weight, tooling and fleet gear day after day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% Full Extension, Not Three Quarters\u003c\/strong\u003e\u003cbr\u003eThis is what separates a MAX from the rest of the BEDSLIDE range. The deck runs all the way out, clear of the tailgate, so the far end of the tray finishes up where you are standing instead of still inside the bed. Everything on the deck becomes reachable without climbing in, which is the whole point if you load heavy or work out of the truck all day. The other BEDSLIDE series extend 75%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERDECK Composite Deck\u003c\/strong\u003e\u003cbr\u003eThe deck is BEDSLIDE's own WEATHERDECK composite rather than plywood or bare steel. It lives outdoors for its entire life, so it is built not to swell, rot or de-laminate when it gets rained on, loaded wet or hosed out. It also takes a textured surface that stops light loads sliding around on the tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEDTRAX Rails and Four D-Ring Tie-Downs\u003c\/strong\u003e\u003cbr\u003eBEDTRAX T-slot rails run the length of the deck with four D-ring tie-downs supplied, so you can strap a load down properly instead of hoping it stays put. The rails also take the BEDSLIDE accessory range, including the BedBin storage boxes, if you want to divide the tray up later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Perimeter Guardrail Included\u003c\/strong\u003e\u003cbr\u003eThe guardrail kit is in the box, not an upsell. It runs the full perimeter of the deck, so loose cargo stays on the tray while it is moving and while it is running in and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Cam-Follower Bearings and a Hard Latch\u003c\/strong\u003e\u003cbr\u003eThe MAX runs heavy duty cam-follower bearings with a hard latch system, which is what lets it hold a rated load at full extension rather than only when the deck is home. It locks in multiple positions, so you can run it part way out and leave it there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA and Backed for the Long Term\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE builds these in the USA. The MAX Extension range carries a 5 year warranty. Note that the lifetime registration upgrade offered on the other BEDSLIDE series does not apply to MAX models, so the 5 year term is the term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eRequirement\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eTray size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 75\" x 48\" outer dimensions, handle included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eBed floor needed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e A clear bed floor that will take a 75\" x 48\" tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eProfile height\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e 7\" of bed floor height is taken up by the slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eFitment method\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e Matched by bed size, not by a vehicle specific kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003ePublished make and model chart\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#b25e00;font-weight:700;\"\u003e●\u003c\/span\u003e BEDSLIDE does not publish one for the MAX Extension range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e BEDSLIDE's Application Guide covers the Classic, Contractor and Heavy Duty series and does not carry a make and model chart for the MAX Extension range, so there are no MAX rows to show, and another series' rows would not tell you the truth about this tray. Fit this tray by measuring: if your bed floor takes a 75\" x 48\" tray and you can give up 7\" of bed height, this MAX will go in. BEDSLIDE sizes are OUTER dimensions, they include the handle, and the trays are built to a .25\" tolerance. Measure the inside of your own bed floor before ordering rather than relying on the model year alone, because bed liners, bed mats, wheel well intrusions and factory tie-down hardware all change the space a tray actually has to sit in.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel:\u003c\/b\u003e BEDSLIDE 2000 MAX Extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 20-7548-MXB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 2,000 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtension:\u003c\/b\u003e 100% full extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Size (L x W):\u003c\/b\u003e 75\" x 48\" outer dimensions, handle included, built to a .25\" tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile Height:\u003c\/b\u003e 7\" from the truck bed floor to the top of the deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e Heavy duty cam-follower bearings with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeck Material:\u003c\/b\u003e WEATHERDECK composite decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e BEDTRAX T-slot rails with (4) D-ring tie-downs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuardrail:\u003c\/b\u003e Full perimeter guardrail kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Multiple locking positions with a hard latch system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish Options:\u003c\/b\u003e Black Edition\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 409 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 20-7548-MXB 850001518536\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 year warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e About 1 hour, dealer installation recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-in to the truck bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Socket set, drill and bits for a standard drill-in installation, tape measure, and a second person to lift the tray into the bed  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate. BEDSLIDE recommends having a dealer carry out the installation\u003c\/p\u003e\n\u003cp\u003eMeasure the inside of the bed floor and dry fit the rails before committing to any holes. BEDSLIDE specifically advises against installing over a bed liner, because liners vary in thickness and profile and the tray may need adjusting to sit flat and run true. On an aluminum bed, use BEDSLIDE's aluminum bed kit, part BSA-HALUMKT: fastening steel directly to an aluminum bed invites galvanic corrosion, and BEDSLIDE's warranty excludes corrosion caused by improper installation. The tray weighs 409 lb, so lift it in with two people and check the deck runs cleanly through its full travel and latches in every position before you load it.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE 2000 MAX Extension Truck Bed Cargo Slide, 75\" x 48\", 2,000 lb, Black Edition, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-assembly-instructions.pdf?v=1786362836\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Assembly and Installation Manual (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e 5 year warranty from BEDSLIDE, original owner only and not transferable on resale. The MAX Extension range does NOT carry the lifetime-with-registration upgrade that the other BEDSLIDE series offer, so 5 years is the full term. BEDSLIDE excludes misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, de-lamination of the deck from water fuel or chemical spills, modifications that alter the design, improper installation, accidents and lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented this product category. The company has been building slide-out truck bed cargo trays in the USA since the 1990s, and the design that everyone else copied, a rolling deck on cam-follower bearings that pulls the load out to the tailgate, is theirs. BEDSLIDE is part of the LEER and JB Poindexter family of truck equipment brands, and it is a member of the NTEA, the association for the work truck industry, which is the room its commercial and fleet products are built for.\u003c\/p\u003e\n\u003cp\u003eThe range is deliberately narrow and deep. There are four slide series, the 1000 Classic, the 1500 Contractor, the 2000 Heavy Duty and the MAX Extension models, and each one is offered across sixteen deck sizes so the tray matches the bed rather than the bed being asked to accept a compromise. Every slide gets the same core build: a WEATHERDECK composite deck that is made to live outdoors, BEDTRAX T-slot rails with D-ring tie-downs, a full perimeter guardrail kit in the box, and a frame built to be loaded rather than to look loaded. Everything is made in the USA.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every slide we ship is new, factory packed and covered by the full BEDSLIDE factory warranty, and registering it within 30 days of purchase is what upgrades the standard 5 year cover to the lifetime term on the series that offer it.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107132481780,"sku":"20-7548-MXB","price":3414.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-2000-max-extension-75x48-max-extension-black-rear-quarter-fully-extended.jpg?v=1786369259","url":"https:\/\/prestigetruck.com\/products\/bedslide-2000-max-extension-truck-bed-cargo-slide-75-in-x-48-in-black-20-7548-mxb","provider":"Prestige Truck","version":"1.0","type":"link"}