{"product_id":"bedslide-aluminum-bed-install-kit-bsa-halumkt","title":"BEDSLIDE Aluminum Bed Install Kit (BSA-HALUMKT)","description":"\u003cp\u003eBolting a steel-framed BEDSLIDE straight into an aluminum truck bed is how you get galvanic corrosion, and BEDSLIDE says so plainly: improper installation can lead to corrosion. This kit is the correct way to do it. It brings 5\" x 5\" mount plates that spread the load across the thinner aluminum floor, nylon sleeves that isolate the fasteners from the bed, aluminum riv nuts rather than steel ones, and the riv nut tool to set them, plus all the bolts, nyloc nuts and washers. The kit works with any BEDSLIDE, and the beds that need it are the 2015 and newer Ford aluminum beds. If you have one of those trucks and you are mounting a slide by riv nut rather than with a no-drill bracket kit, this is not optional hardware, it is the difference between a clean install and a corroded bed floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 5\" x 5\" mount plates\u003c\/li\u003e\n\u003cli\u003e(2) 3\/8-16 x 2-1\/2\" bolts\u003c\/li\u003e\n\u003cli\u003e(2) 3\/8-16 nyloc nuts\u003c\/li\u003e\n\u003cli\u003e(6) 3\/8 flat washers\u003c\/li\u003e\n\u003cli\u003e(2) nylon sleeves\u003c\/li\u003e\n\u003cli\u003e(2) 5\/16 split lock washers\u003c\/li\u003e\n\u003cli\u003e(2) 5\/16-18 x 2\" bolts\u003c\/li\u003e\n\u003cli\u003e(2) aluminum riv nuts\u003c\/li\u003e\n\u003cli\u003e(1) riv nut tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStops Galvanic Corrosion Before It Starts\u003c\/strong\u003e\u003cbr\u003eAluminum riv nuts and nylon isolating sleeves keep dissimilar metals apart at the one place they would otherwise touch. That is the entire reason this kit exists, and BEDSLIDE's own warning is that improper installation can lead to corrosion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Plates Spread the Load\u003c\/strong\u003e\u003cbr\u003eThe (2) 5\" x 5\" plates spread the mounting load across a wider area of the bed floor. An aluminum bed is thinner and softer than the steel it replaced, so concentrating a loaded slide onto a few small fasteners is not a good idea.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Riv Nut Tool Is Included\u003c\/strong\u003e\u003cbr\u003eThe kit includes the tool that sets the aluminum riv nuts, so the whole job is in one box rather than needing a separate tool purchase for a one-time task.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor 2015 and Newer Ford Aluminum Beds\u003c\/strong\u003e\u003cbr\u003eBEDSLIDE identifies the current applications as all Ford 2015 and newer aluminum truck beds. If your bed is aluminum and you are mounting with riv nuts, this is the kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks With Any BEDSLIDE\u003c\/strong\u003e\u003cbr\u003eThis is mounting hardware, not a sized part, so the same kit covers a 1000 CLASSIC, a 1500 CONTRACTOR, a 2000 HEAVY DUTY and a MAX Extension in any deck size.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:8px 0 4px;border:1px solid #e6e6e6;border-radius:8px;\"\u003e\u003ctable style=\"display:table;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eTruck bed\u003c\/th\u003e\n\u003cth style=\"background:#ba232a;color:#ffffff;text-align:left;padding:12px 14px;font-weight:700;border:none;\"\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eFord 2015 and newer aluminum beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, these are the applications BEDSLIDE names\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eAny other aluminum truck bed\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, the kit is about bed material rather than model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eSteel truck beds\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e Not needed, use the standard BSA-RIVKT riv nut kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;font-weight:600;\"\u003eAny BEDSLIDE series or deck size\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#f7f7f7;\"\u003e\n\u003cspan style=\"color:#1a7f37;font-weight:700;\"\u003e✓\u003c\/span\u003e Yes, this is mounting hardware and not size specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;font-weight:600;\"\u003eSlides mounted with a no-drill bracket kit\u003c\/td\u003e\n\u003ctd style=\"padding:12px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;\"\u003e\n\u003cspan style=\"color:#ba232a;font-weight:700;\"\u003e✗\u003c\/span\u003e Not needed, those use the factory bed bolts or tie-down points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e What decides whether you need this kit is what your bed is made of, not which slide you bought. BEDSLIDE lists the current applications as all Ford 2015 and newer aluminum truck beds, and warns that improper installation can lead to corrosion. If you are mounting into an aluminum bed with riv nuts, use this kit. If your truck has a steel bed, the standard BSA-RIVKT kit is the right part. If you are using a no-drill factory mount bracket kit instead, nothing goes through the bed floor at all and neither kit is needed.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e BSA-HALUMKT\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Aluminum bed install kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount Plates:\u003c\/b\u003e (2) 5\" x 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRiv Nuts:\u003c\/b\u003e (2) aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIsolation:\u003c\/b\u003e (2) nylon sleeves\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTool Included:\u003c\/b\u003e (1) riv nut tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications:\u003c\/b\u003e Ford 2015 and newer aluminum truck beds\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e Any BEDSLIDE\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e BEDSLIDE\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e Made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 5 years, extended to lifetime with registration within 30 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 3 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 851274002647\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Riv nut inserts and isolating mount plates set into an aluminum bed floor  ·  \u003cb\u003eTime:\u003c\/b\u003e About 1 hour on top of the slide install  ·  \u003cb\u003eTools:\u003c\/b\u003e Drill with the correct bit, socket set, plus the riv nut tool supplied  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Intermediate, DIY with care\u003c\/p\u003e\n\u003cp\u003ePosition the mount plates against the slide frame and mark before drilling, then check underneath for fuel lines, wiring and the spare tire. Set the aluminum riv nuts with the supplied tool. The nylon sleeves are the part people skip and should not: they isolate the fastener from the aluminum floor and are the reason this kit exists. The BEDSLIDE aluminum bed install instructions are linked on this page and should be read before you drill anything.\u003c\/p\u003e\n\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BPXcUVeg3-I\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything you need for your BEDSLIDE Aluminum Bed Install Kit, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-aluminum-bed-install.pdf?v=1786362840\" target=\"_blank\" rel=\"noopener\" title=\"Download the BEDSLIDE installation guide that covers this product, with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBEDSLIDE Aluminum Bed Install Instructions (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e BEDSLIDE covers all of its products with a 5-year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Coverage is for the original owner only and does not transfer if the product is resold. The warranty does not cover misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, deck de-lamination from water, fuel or chemical spills, modifications that alter the design, improper installation, accidents, or lack of maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states and typically arrives in 3 to 7 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect your order on arrival. If anything is damaged or missing, contact us right away and we will make it right.\u003c\/p\u003e\n\u003ch3\u003eAbout BEDSLIDE\u003c\/h3\u003e\n\u003cp\u003eBEDSLIDE invented the slide-out truck bed cargo tray. The idea is simple and it has not needed much improving: put the whole bed floor on heavy-duty bearings so it rolls out to you instead of making you climb in after your gear. Contractors, utility fleets, overlanders and anyone who has ever crawled the length of a bed looking for one tool have been buying them for the same reason for decades. Today BEDSLIDE is part of the LEER family under JB Poindexter and Co, which is the largest truck cap and accessory group in North America, and it remains an active NTEA member supplying commercial and work-truck upfitters. Every BEDSLIDE product is made in the USA.\u003c\/p\u003e\n\u003cp\u003eThe accessory line exists because the deck is only half the system. BEDTRAX T-slot rails run the length of every current BEDSLIDE, and the bins, trays, guardrails, tie-downs and mounting kits all drop into that same track, so you can add capability years after the slide went in without drilling anything new. Parts are built from aluminum and composite with an all-weather soft surface inside the bins, and they are designed to live outdoors in the same weather the slide does.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized BEDSLIDE dealer. Every part we ship is new, in the factory box, and covered by the full BEDSLIDE factory warranty.\u003c\/p\u003e","brand":"BEDSLIDE","offers":[{"title":"Default Title","offer_id":49107142344948,"sku":"BSA-HALUMKT","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/bedslide-aluminum-bed-install-kit-bsa-halumkt-all-hardware-laid-out-on-white.png?v=1786369344","url":"https:\/\/prestigetruck.com\/products\/bedslide-aluminum-bed-install-kit-bsa-halumkt","provider":"Prestige Truck","version":"1.0","type":"link"}