{"product_id":"borla-s-type-cat-back-exhaust-system-2019-2026-ram-1500-140752","title":"Borla S-Type Cat-Back Exhaust System for 2019-2024 \u0026 2026 Ram 1500 5.7L","description":"\u003cp\u003eThis S-Type cat-back from Borla (part 140752) fits the 2019-2024 Ram 1500 and 2026 Ram 1500 with the 5.7L V8 incl. eTorque, automatic. It is listed for Quad Cab 6'4\" bed (140.5\" WB), Crew Cab 5'7\" bed (144.6\" WB) or 6'4\" bed (154\" WB), incl. Rebel and G\/T, factory through-bumper tip exit. It exits through a split rear exit with one tip on each side; Borla lists the pipe size as 3\" and 2.5\". Tip Finish options are bright chrome and black chrome, on 5\" round rolled angle-cut tips. It is built from T-304 stainless steel, and Borla describes S-Type as aggressive under throttle and more refined at a steady cruise.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eClassic S-Type sound\u003c\/strong\u003e\u003cbr\u003eBorla puts S-Type in the middle of its three sound levels: bolder than Touring and a little tamer than ATAK. Borla describes it as aggressive when you get on the throttle and more refined once you settle into a cruise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStarts behind the converters\u003c\/strong\u003e\u003cbr\u003eA Cat-Back system takes over from the catalytic converters rearward and swaps the pipes, mufflers and tips that follow them. The factory converters are not touched and stay on the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMuffler tuned to the vehicle\u003c\/strong\u003e\u003cbr\u003eBorla develops each system on the vehicle it is sold for, working out the muffler body, core layout and pipe routing around that engine, so the S-Type character suits the platform rather than a generic muffler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-304 stainless steel\u003c\/strong\u003e\u003cbr\u003eEvery system in this family is built from T-304 austenitic stainless steel. Borla picks it over 409 and aluminized steel because it stands up far better to road salt, moisture and repeated heat cycles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMillion-Mile Warranty\u003c\/strong\u003e\u003cbr\u003eBorla covers the system against flaws in materials or workmanship for one million miles, for the original buyer on the vehicle it was first fitted to. Tip finishes, black coatings and carbon fiber carry a one-year term.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTip finish choices\u003c\/strong\u003e\u003cbr\u003eMost systems come in more than one tip finish, such as bright chrome, black chrome, carbon fiber or ceramic black, offered as options on the product page. A few systems reuse the factory tips instead.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-140752 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-140752\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-140752\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-140752 .pt-fit__tabs{display:none}#fit-140752 .pt-fit__p{display:block!important}#fit-140752 .pt-fitw{overflow:visible!important}#fit-140752 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eRam\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2019-2024\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"n\"\u003e5.7L V8 incl. eTorque, automatic; Quad Cab 6'4\" bed (140.5\" WB), Crew Cab 5'7\" bed (144.6\" WB) or 6'4\" bed (154\" WB); incl. Rebel and G\/T; factory through-bumper tip exit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2026\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"n\"\u003e5.7L V8 incl. eTorque, automatic; Quad Cab 6'4\" bed (140.5\" WB), Crew Cab 5'7\" bed (144.6\" WB) or 6'4\" bed (154\" WB); incl. Rebel and G\/T; factory through-bumper tip exit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e match your year, engine and cab\/bed to the fitment rows: 5.7L V8 incl. eTorque, automatic; Quad Cab 6'4\" bed (140.5\" WB), Crew Cab 5'7\" bed (144.6\" WB) or 6'4\" bed (154\" WB); including Rebel and G\/T; factory through-bumper tip exit. Does NOT fit Ram 1500 Classic. No 2025 fitment (5.7L not offered for 2025). Requires the factory through-bumper tip exit. Includes Rebel and G\/T package trucks.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e other S-Type cat-backs for this model: 140307 (2009-2024, 5.7L V8, Regular Cab 6'4\" bed (120.5\" WB), Quad Cab 6'4\" bed or Crew Cab 5'7\" bed (140.5\" WB)); 140308 (2009-2024, 5.7L V8, Regular Cab 6'4\" bed (120.5\" WB), Quad Cab 6'4\" bed or Crew Cab 5'7\" bed (140.5\" WB), 4\" tips); 140852 (2019-2024, 3.6L V6, Quad Cab 6'4\" bed (140.5\" WB), Crew Cab 5'7\" bed (144.6\" WB) or 6'4\" bed (153.5\" WB), 4\" tips); 140860 (2019-2024, 3.6L V6, Quad Cab 6'4\" bed (140.5\" WB), Crew Cab 5'7\" bed (144.6\" WB) or 6'4\" bed (153.5\" WB), single right rear exit).\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eOther Borla sound levels for this vehicle:\u003c\/strong\u003e Touring 140552, 140758; ATAK 140753 (check each part's own fit notes).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Borla\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e Cat-Back exhaust system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSound Level:\u003c\/b\u003e S-Type (Borla's middle level)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStarts At:\u003c\/b\u003e Behind the catalytic converters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTips:\u003c\/b\u003e 5\" round rolled angle-cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLayout:\u003c\/b\u003e Split rear exit, one tip each side\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePipe:\u003c\/b\u003e 3\" and 2.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Bright Chrome, Black Chrome\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRecommended installation:\u003c\/b\u003e Professional · \u003cb\u003eType:\u003c\/b\u003e Hangs in place of the factory exhaust on the stock hangers on most vehicles; some sheets call for cutting the factory pipe · \u003cb\u003eTools:\u003c\/b\u003e 3\/8\" drive ratchet; 16mm socket; 15mm deep well socket; 13mm socket; Pry bar; Reciprocating saw\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow Borla's install sheet (below) for your vehicle's exact steps.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eLubricate all hangers, rubber isolators, bolts and nuts.\u003c\/li\u003e\n\u003cli\u003eTo make the removal and installation of your exhaust easier, remove or raise the spare tire as recommended by vehicle manufacture.\u003c\/li\u003e\n\u003cli\u003eUnbolt band clamps on the right tailpipe assembly and left tip assembly.\u003c\/li\u003e\n\u003cli\u003eUnbolt the flange on the muffler assembly.\u003c\/li\u003e\n\u003cli\u003eUnbolt the left sway bar end link for better clearance and place the hardware aside for reinstallation later. If necessary, make cuts using a reciprocating saw for better clearance.\u003c\/li\u003e\n\u003cli\u003eLoosen factory band clamp on right tailpipe assembly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/borla-install-a-35977.pdf?v=1791161105\" target=\"_blank\" rel=\"noopener\"\u003eBorla A-35977 Rev. D - Ram 1500 5.7L (PDF)\u003c\/a\u003e, Borla's own instructions for this part.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Borla's Million-Mile Warranty covers this part for one million miles against flaws in its materials or workmanship.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage belongs to the original purchaser of record, on the vehicle the part was first installed on.\u003c\/li\u003e\n\u003cli\u003eBlack coatings, tip finishes, carbon fiber and moving parts such as valves and actuators carry a one-year term. Blemishes or marring caused by weather, road hazards, lack of maintenance or extreme heat or cold are not covered.\u003c\/li\u003e\n\u003cli\u003eBorla inspects the returned part, and when it finds a manufacturing or material defect it repairs or replaces the part, at Borla's option.\u003c\/li\u003e\n\u003cli\u003eSound level is not warranted, since sound is a matter of taste. Borla notes that venturis can be fitted to quiet a system.\u003c\/li\u003e\n\u003cli\u003eUniversal mufflers must be joined at their inlet and outlet necks. Welding to the case shell or end caps voids the warranty.\u003c\/li\u003e\n\u003cli\u003eNot covered: the cost of removal or reinstallation; damage from accident, abuse, misuse or misapplication; parts that are modified or used for something other than their intended purpose; racing products, and street parts used for racing.\u003c\/li\u003e\n\u003cli\u003eTo claim, contact us first with your order number and a short description of the problem. Borla asks for proof of the retail purchase date, and your Prestige Truck receipt is that proof. A part sent back to Borla travels with freight prepaid by the sender, packed well, since Borla cannot accept parts damaged in transit.\u003c\/li\u003e\n\u003cli\u003eSome states do not allow these limits, so your rights may vary by state.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e This system ships in a large carton: lay every pipe, muffler, clamp and hanger out against the install sheet's parts list before you start, and photograph any dents or scuffed tips right away. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout Borla\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eBORLA\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eBorla got its start in 1978 making stainless exhaust systems for concours Rolls-Royce and Ferrari restorations, and says the term Cat-Back began with it that same year. The company still builds in stainless steel, now at a 100-acre plant in Tennessee, and Borla says automakers including GM, Ford and Toyota use it for some of their factory-installed accessory exhaust.\u003c\/p\u003e\n\u003cp\u003eBorla engineers each vehicle system from a clean sheet, shaping the muffler bodies, cores and pipe routing around that one platform, and offers many of its systems in three sound levels: Touring, S-Type and ATAK. For custom work it makes ProXS universal mufflers, CrateMufflers tuned to crate engines, exhaust tips, tubing, clamps and hangers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized Borla dealer.\u003c\/strong\u003e Prestige Truck is an authorized Borla dealer, so every Borla part we sell is new and genuine. Borla's Million-Mile Warranty is for the original purchaser, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: Borla asks for proof of the purchase date with any claim, and we use it when we take a claim to Borla for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"Borla","offers":[{"title":"Bright Chrome","offer_id":67697625104628,"sku":"140752","price":1423.99,"currency_code":"USD","in_stock":true},{"title":"Black Chrome","offer_id":67697625137396,"sku":"140752BC","price":1469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/borla-borla-s-type-cat-back-exhaust-system-exploded-stainless-cat-back-system-with-one-muffler-1_54258a7f-4f1a-406d-9a5c-fcad02948258.jpg?v=1791164286","url":"https:\/\/prestigetruck.com\/products\/borla-s-type-cat-back-exhaust-system-2019-2026-ram-1500-140752","provider":"Prestige Truck","version":"1.0","type":"link"}