{"product_id":"borla-s-type-cat-back-exhaust-system-2021-2026-ford-bronco-140902","title":"Borla S-Type Cat-Back Exhaust System for 2021-2026 Ford Bronco 2.7L","description":"\u003cp\u003eThe S-Type Cat-Back Exhaust System gives the exhaust behind the catalytic converters Borla's S-Type voice, the classic Borla tone: aggressive under throttle and refined at cruise. T-304 stainless steel keeps corrosion and heat from shortening the life of the system. Order Borla part 140902 for the 2021-2026 Ford Bronco.\u003c\/p\u003e\n\u003cp\u003eInstallation is not included, and any extension pipe, tip or other optional Borla part called out in the fit notes is sold separately.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBorla's classic middle sound level\u003c\/strong\u003e\u003cbr\u003eS-Type is a little tamer than ATAK and clearly bolder than Touring. It turns aggressive when you accelerate and returns to a refined tone at cruising speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplaces piping behind the converters\u003c\/strong\u003e\u003cbr\u003eThe system starts downstream of the catalytic converters, so the factory converters remain installed and the change is made in the pipes and mufflers that follow them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMuffler tuning matched to the vehicle\u003c\/strong\u003e\u003cbr\u003eBorla develops each system on the vehicle it fits, adjusting muffler body shape, core layout and routing so the S-Type character works with that engine's natural sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCorrosion-resistant T-304 stainless\u003c\/strong\u003e\u003cbr\u003eT-304 austenitic stainless steel carries more chromium and nickel than 409 or aluminized steel, which helps it shrug off road salt, moisture and heat cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMillion-Mile Warranty coverage\u003c\/strong\u003e\u003cbr\u003eBorla warrants the system against material and workmanship defects for the original buyer on the original vehicle, with tip finishes and moving parts on a one-year term.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits: 2021-2026 Ford Bronco, with the engine, cab, bed and trim qualifiers shown. Check your vehicle against these notes before ordering.\u003cbr\u003e\u003cb\u003eQualifier:\u003c\/b\u003e 2.7L EcoBoost V6; 2-door or 4-door; 4WD; automatic; high-clearance climber\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eBorla fit notes for this part\u003c\/strong\u003e\u003c\/p\u003e\u003ctable style=\"border-collapse:collapse;width:100%;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eHigh-clearance Climber\/Rock Crawler system with turn-down tip.\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eFits the 2.7L V6 Bronco (not Raptor).\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Borla\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSound level:\u003c\/b\u003e S-Type\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Borla Million-Mile Warranty (one year on carbon fiber, black coatings, tip finishes and moving parts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSystem Type:\u003c\/b\u003e Cat-Back\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePipe Diameter:\u003c\/b\u003e 2.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTip Size:\u003c\/b\u003e 2.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTip Exit:\u003c\/b\u003e Vehicle Single Left Rear Exit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTip finish:\u003c\/b\u003e Brushed Stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct weight:\u003c\/b\u003e 20.9 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e 140902\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWARNING: This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing or thermal cutting can expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eType: Cat-Back exhaust system  ·  Install: vehicle-specific; method varies by application  ·  Tools: listed on the Borla install sheet\u003c\/p\u003e\u003cp\u003eThis system replaces the factory exhaust from the catalytic converters rearward and mounts at the vehicle's existing hanger locations. Follow the fit notes below and the Borla install sheet for this application.\u003c\/p\u003e\u003cp\u003eBorla's installation instructions for this part number are linked under Resources. Read them fully before starting.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/borla-install-a-36063.pdf?v=1791161178\" target=\"_blank\" rel=\"noopener\" title=\"Borla S-Type Cat-Back Exhaust System installation instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eBorla S-Type Cat-Back Exhaust System installation instructions (PDF)\u003c\/a\u003e, Borla's step-by-step guide, which covers part 140902.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Borla covers its products under the Million-Mile Warranty, which protects the original purchaser of record, on the vehicle the part was first installed on, against defects in materials or workmanship for a million miles. Carbon fiber, black coatings, tip finishes and moving parts such as valves and actuators carry a one-year term, and appearance blemishes from weather, road hazards, lack of maintenance or temperature extremes are not covered. When Borla's inspection confirms a defect, Borla repairs or replaces the part at its option. The warranty does not pay for removal or reinstallation, does not apply to parts damaged by accident, abuse, misuse, misapplication or modification, and does not cover sound level, because sound is a matter of taste. \u003cstrong\u003eShipping.\u003c\/strong\u003e The carrier and ship method are set by the size and weight of the carton when the order is placed; long exhaust systems ship in oversize cartons. \u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e When the carton arrives, open it and check every pipe, muffler, clamp and hanger against the parts list before you start the install, and report any shipping damage right away with photos.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout Borla\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eBorla began in 1978 building stainless exhaust systems for concours Rolls-Royce and Ferrari restorations, and the company has grown into a leading name in stainless performance exhaust for cars and vehicles.\u003c\/p\u003e\n\u003cp\u003eEach Borla system starts as a clean-sheet design for one vehicle. Engineers at the research and development center in Oxnard, California shape the muffler bodies, internal cores and flow paths around that platform's own mechanical and acoustic traits, then offer the result in a choice of Touring, S-Type or ATAK sound.\u003c\/p\u003e\n\u003cp\u003eProduction happens at a 100-acre plant in Johnson City, Tennessee, where raw stainless steel is cut, bent, welded and shipped. Borla also supplies factory-installed accessory exhaust to automakers such as GM, Ford and Toyota.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":67697632149748,"sku":"140902","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/borla-borla-s-type-cat-back-exhaust-system-a-stainless-cat-back-exhaust-with-one-muffler-1_e06f167c-61b0-4567-849f-e0aac0e260df.jpg?v=1791164313","url":"https:\/\/prestigetruck.com\/products\/borla-s-type-cat-back-exhaust-system-2021-2026-ford-bronco-140902","provider":"Prestige Truck","version":"1.0","type":"link"}