{"product_id":"extang-solid-fold-toolbox-2-0-tonneau-cover-2007-2013-toyota-tundra-6-ft-7-in-bed-84950","title":"Extang Solid Fold Toolbox 2.0 Hard Folding Tonneau Cover for 2007-2013 Toyota Tundra (6'7\" Bed, without Deck Rail System)","description":"\u003cp\u003eThe Extang Solid Fold Toolbox 2.0 is a hard folding tonneau cover for the 6'7\" bed of the 2007-2013 Toyota Tundra without the factory deck rail system, sized to sit behind most 18\"-20\" crossover toolboxes. The toolbox is sold separately, and an L-channel seal closes the gap between it and the cover. Its 1\" EnduraShield panels ride on dual-pivot MaxHinges and fold toward the toolbox for about two thirds of the bed once the EZ-Lock clamps are released. Hand-tightened clamps mean there is nothing to drill, and it is assembled in Michigan with Extang's three-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid Fold Toolbox 2.0 cover assembly with Jaw-Grip front and EZ-Lock rear clamps\u003c\/li\u003e\n\u003cli\u003eL-channel with foam seal\u003c\/li\u003e\n\u003cli\u003eBuckle straps for driving with the cover folded\u003c\/li\u003e\n\u003cli\u003eAlternative bracket or clamp-plate hardware for trucks that need it (GM stake-pocket brackets, cargo-rail clamp plates)\u003c\/li\u003e\n\u003cli\u003eInstall guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFits With Your Toolbox\u003c\/strong\u003e\u003cbr\u003eExtang builds the Solid Fold Toolbox 2.0 shorter than the bed so it sits behind a crossover toolbox, and Extang says it works with most 18\"-20\" toolboxes. You keep full access to the toolbox while the bed behind it stays covered. The toolbox is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eL-Channel Toolbox Seal\u003c\/strong\u003e\u003cbr\u003eA patented clamp-on L-channel closes the gap between the toolbox and the cover. Its seal presses against the toolbox so water and road grime stay out of the bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1\" EnduraShield Panels\u003c\/strong\u003e\u003cbr\u003eThe panels are 1\" EnduraShield TPO in a rigid aluminum frame with a textured-black EnduraCoat finish, made to resist impacts, scrapes and UV fading. Dual-pivot MaxHinges strengthen the joints between panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTested to OEM Standards, Says Extang\u003c\/strong\u003e\u003cbr\u003eExtang says the cover went through hard testing for water control, load capacity and fade resistance, and that it passes the strictest OEM tests.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-Locking EZ-Lock Clamps\u003c\/strong\u003e\u003cbr\u003eSpring-loaded EZ-Lock clamps at the tailgate lock the cover to the bed flange, or release it so it folds. Folded toward the toolbox and buckled, it opens about two thirds of the bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOff in Seconds\u003c\/strong\u003e\u003cbr\u003eLoosen the Jaw-Grip front clamps by hand and the whole cover lifts off. There are no tools to fit it or take it off, and no holes to drill.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-ext-84950 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-ext-84950\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-ext-84950\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-ext-84950 .pt-fit__tabs{display:none}#fit-ext-84950 .pt-fit__p{display:block!important}#fit-ext-84950 .pt-fitw{overflow:visible!important}#fit-ext-84950 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eToyota\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2007-2013\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e6'7\"\u003c\/td\u003e\n\u003ctd class=\"n\"\u003ewithout Deck Rail System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your bed:\u003c\/strong\u003e measure inside the bed floor from the bulkhead to the inside of the closed tailgate. Extang lists this bed as 6'7\". This version is for trucks without the factory deck rail system.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e the 2007-2013 Toyota Tundra 8' bed (84955). That is a separate Solid Fold Toolbox 2.0 part. The crossover toolbox is sold separately; this cover is made to sit behind most 18\"-20\" crossover toolboxes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Extang\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e 84950\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover Type:\u003c\/b\u003e Hard tri-fold, toolbox length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eToolbox Fit:\u003c\/b\u003e Most 18\"-20\" crossover toolboxes (toolbox sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePanels:\u003c\/b\u003e 1\" EnduraShield TPO\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrame:\u003c\/b\u003e Aluminum, textured-black EnduraCoat finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHinges:\u003c\/b\u003e Dual-pivot MaxHinges\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e Jaw-Grip front, EZ-Lock rear (tool-free)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Access:\u003c\/b\u003e About 2\/3 folded; full bed with the cover removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Clamp-on, no drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSealing:\u003c\/b\u003e L-channel toolbox seal, triple-fin perimeter seals, polymer corner and hinge seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAssembled In:\u003c\/b\u003e Michigan, USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Length:\u003c\/b\u003e 6'7\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 750289849509\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eWhat's involved:\u003c\/b\u003e L-channel seal sets against the toolbox and the cover clamps at the front and rear, no drilling · \u003cb\u003eTools:\u003c\/b\u003e None for the clamps; Which tighten by hand; Cutting tool if a bed cap or liner needs trimming\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow Extang's install sheet (below) for your truck's exact clamp and bracket hardware. Your crossover toolbox goes in first; it is sold separately.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eWash the bed and set the L-channel.\u003c\/b\u003e Wash the truck bed. Stand the L-channel against the toolbox, its foam seal sitting under the L-channel's lower edge on the bed floor, and center it between the bed walls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlace the cover.\u003c\/b\u003e Rest the assembled cover's front rail on top of the L-channel, centered against the toolbox. Unfold it fully and set it for the right cab and tailgate position, then refold it without letting it shift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClear the flange.\u003c\/b\u003e If a bed cap or bedliner covers the metal bed-wall flange, trim only enough of its edge for every clamp to bite on the bottom of the metal flange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp the front.\u003c\/b\u003e Hook each front clamp under the bed-wall flange and hand-tighten until it touches, then two more turns. Not on the lip of a bedliner or rail cap, and no wrench. Trucks with a factory cargo management rail get a clamp plate at the cab clamps (on most, the tailgate clamps hook straight into the rail), as the sheet's supplement shows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClose it and set the rear clamps.\u003c\/b\u003e With the tailgate open and the front clamps tight, fold the cover out flat. Slide each rear clamp out to the bed wall, pull it down and hook it under the bottom edge of the flange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriving with it folded.\u003c\/b\u003e Release the rear clamps and stow them securely in the rail before you fold the second section, fold the cover forward toward the toolbox and fasten both straps to the front rail. Clear snow and debris before folding, and never drive with it partly open.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/extang-solid-fold-toolbox-2-0-tonneau-cover-installation-guide-install-guide.pdf?v=1788628215\" target=\"_blank\" rel=\"noopener\"\u003eExtang Solid Fold Toolbox 2.0 installation sheet (PDF)\u003c\/a\u003e, Extang's own step-by-step guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty term:\u003c\/strong\u003e 3-year limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Extang covers the Solid Fold Toolbox 2.0 for three years from the date of purchase against defects in materials and workmanship.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhat's covered: the rails, clamps, bows, aluminum parts and hardware.\u003c\/li\u003e\n\u003cli\u003eA defective cover or part is repaired or replaced, at Extang's choice; Extang may substitute or offer a warranty discount on a full replacement system, for example when a product is discontinued.\u003c\/li\u003e\n\u003cli\u003eFor the original purchaser, with warranty registration on file or a detailed, dated receipt.\u003c\/li\u003e\n\u003cli\u003eTo keep it valid: clean with Extang Tonno Tonic or soap and water only (no silicone vinyl conditioners); drive only with the cover flat and held at all four clamps, or fully folded and secured with both buckles; never drive with it partly open; keep cargo from touching the panels; clear snow, ice and debris before opening; take the cover off before the truck is towed from the rear.\u003c\/li\u003e\n\u003cli\u003eClaims: get a return authorization number from Extang first and write it on the outside of the package. Shipping to Extang is at your cost, Extang may ask for the part back postage prepaid, and shipping charges apply to any repair or replacement.\u003c\/li\u003e\n\u003cli\u003eNot covered: accidents, misuse, neglect, improper service, installation or removal, normal wear and tear, modifications, acts of God, interference with other accessories or trailers, and consequential or incidental damages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eBecause of its size, the cover ships by freight or as an oversized parcel.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e This cover ships in a large, heavy box. The toolbox is not included. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout Extang\u003c\/h3\u003e\n\u003cp\u003eExtang is based in Ann Arbor, Michigan, and the Solid Fold Toolbox 2.0 is assembled in Michigan. Extang publishes an install sheet with truck-specific bracket notes and backs the cover with a three-year warranty.\u003c\/p\u003e\n\u003cp\u003eIt keeps the panels and frame of Extang's Solid Fold 2.0, shortened to leave room for a crossover toolbox, which is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty note.\u003c\/strong\u003e Extang's 3-year limited warranty applies to the original purchaser, with warranty registration on file or a detailed, dated receipt. Keep your order confirmation from us, and contact us for warranty claims and registration help.\u003c\/p\u003e","brand":"Extang","offers":[{"title":"Default Title","offer_id":67813373608180,"sku":"EXT84950","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/extang-solid-fold-toolbox-2-0-tonneau-cover-f87c56e643516e55890a16cf3f671d7a.jpg?v=1792141589","url":"https:\/\/prestigetruck.com\/products\/extang-solid-fold-toolbox-2-0-tonneau-cover-2007-2013-toyota-tundra-6-ft-7-in-bed-84950","provider":"Prestige Truck","version":"1.0","type":"link"}