{"product_id":"extang-trifecta-alx-tonneau-cover-2019-2026-ram-1500-5-ft-7-in-bed-90421","title":"Extang Trifecta ALX Soft Folding Tonneau Cover for 2019-2026 Ram 1500 (5'7\" Bed, without RamBox)","description":"\u003cp\u003eThe Trifecta ALX suits owners who want the bed covered but still want to get into it fast. Extang builds it as a soft folding cover: marine-grade Ancona vinyl stretched over an aircraft-grade aluminum frame. Tool-free Jaw-Grip clamps hold it to the front bed rails with no drilling, and the whole cover lifts off in seconds for a full-length load. Fold the panels toward the cab and two thirds of the bed opens, with buckle straps holding them there while you drive. Opening it takes one hand at the tailgate. The Secure Rotary Release then catches by itself on close, and that latch is the one change from the Trifecta 2.0 underneath. Part number 90421 is the 5'7\" bed application for the 2019-2026 Ram 1500, without RamBox.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrifecta ALX soft folding tonneau cover, Ancona vinyl tarp on an aluminum frame\u003c\/li\u003e\n\u003cli\u003eTool-free Jaw-Grip front clamps\u003c\/li\u003e\n\u003cli\u003eBolt-on rotary latch strikers\u003c\/li\u003e\n\u003cli\u003eAdhesive-free snap-on rail, bulkhead and tailgate seals\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003cli\u003eExtang i-Sheet install guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/HSDv374rPzI\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSealed at Rails, Bulkhead and Tailgate\u003c\/strong\u003e\u003cbr\u003eExtang rates the Ancona vinyl weather-resistant. Where covers usually leak is the edges, so snap-on triple-fin seals run down both bed rails, across the bulkhead and behind the tailgate. They clip on dry, so no adhesive touches your bed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFold Forward for Two Thirds Access\u003c\/strong\u003e\u003cbr\u003eThe panels fold toward the cab and stack there, opening two thirds of the bed for gear you load over the tailgate. Buckle straps built into the cover hold the stack down so you can leave it folded and drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo Drilling, Nothing Cut\u003c\/strong\u003e\u003cbr\u003eNothing on your truck is cut, drilled or modified, so the bed goes back to stock whenever the cover comes off. Extang rates the work Level 1 and puts it under an hour with ordinary hand tools, which puts it in reach at home.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAluminum Frame, Ancona Vinyl Skin\u003c\/strong\u003e\u003cbr\u003eThe frame is aircraft-grade aluminum in a textured-black EnduraCoat finish. It keeps the cover rigid without much weight and the sections fold on dual-pivot MaxHinges. Over it sits Extang's pebble-grained Ancona vinyl, a marine-grade fabric made to take the wear of daily truck use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne-Hand Rotary Release Latch\u003c\/strong\u003e\u003cbr\u003eThe tailgate hardware is Extang's Secure Rotary Release Latching System. Its knob sits at the driver's rear corner of the bed. Turn it, lift the rear panel and the cover is open, one-handed, with your other arm free for the load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt on the Trifecta 2.0\u003c\/strong\u003e\u003cbr\u003eExtang built the ALX on its Trifecta 2.0 and says it carries the same features, with the tailgate latch as the update. That swap brings the Secure Rotary Release and its auto-latching close. The cover keeps a low-profile appearance.\u003c\/p\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2019-2026 Ram 1500 with the 5'7\" bed. Not for the 6'4\" bed (EXT-90430). This part is the without RamBox version.\u003c\/p\u003e\u003c\/div\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCover Type:\u003c\/b\u003e Soft folding tonneau cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Marine-grade Ancona vinyl tarp over an aircraft-grade aluminum frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Pebble-grained vinyl; textured-black EnduraCoat frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Access:\u003c\/b\u003e Two thirds with the cover folded open; full bed with tool-free removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSealing:\u003c\/b\u003e Adhesive-free snap-on triple-fin seals at the bed rails, bulkhead and tailgate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSecurity:\u003c\/b\u003e Secure Rotary Release latch at the tailgate, latches automatically on close\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHinges:\u003c\/b\u003e Dual-pivot MaxHinges\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e Tool-free Jaw-Grip front clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOpen Position:\u003c\/b\u003e Integrated buckle straps hold the folded cover while driving\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Low profile\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrilling Required:\u003c\/b\u003e No, clamp-on install\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Time:\u003c\/b\u003e Under 1 hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e 2019-2026 Ram 1500, 5'7\" bed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e About 35 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstall Difficulty:\u003c\/b\u003e Level 1, simple\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Clamp-on, no drilling  ·  \u003cb\u003eTime:\u003c\/b\u003e Under 1 hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Included hardware kit, conventional hand tools  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Level 1, simple\u003c\/p\u003e\u003cp\u003eThe front Jaw-Grip clamps tighten by hand onto the inner bed rails and the rotary latch strikers bolt to the bed at the tailgate. Seals snap into their channels along the rails, the bulkhead and the tailgate with no adhesive. Extang writes separate i-Sheets for RamBox beds and for the Gladiator, Frontier, Ridgeline, Ranger, Tacoma, Tundra and Titan, so follow the sheet that matches your truck.\u003c\/p\u003e\u003cp\u003eWatch the installation walkthrough:\u003c\/p\u003e\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/se5I1CXIZgI\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eResources\u003c\/h3\u003e\u003cp\u003eEverything you need for your Extang Trifecta ALX Soft Folding Tonneau Cover for 2019-2026 Ram 1500 (5'7\" Bed, without RamBox), in one place.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/extang-trifecta-alx-tonneau-cover-rambox-install-guide.pdf?v=1788628009\" target=\"_blank\" rel=\"noopener\" title=\"Download the official Extang installation guide for the Extang Trifecta ALX Soft Folding Tonneau Cover for 2019-2026 Ram 1500 (5'7\u0026quot; Bed, without RamBox), with step-by-step mounting instructions and hardware details\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial Extang Trifecta ALX Soft Folding Tonneau Cover for 2019-2026 Ram 1500 (5'7\" Bed, without RamBox) installation guide (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Extang covers the Trifecta ALX with a limited lifetime warranty against defects in materials or workmanship on the rails, aluminum parts, clamps, bows, hardware and vinyl, for the original purchaser with proof of purchase or a registration on file. It does not cover accident damage, misuse, neglect, improper installation or removal, modifications or normal wear. Extang also voids coverage for wind whip from a tarp left unsecured, silicone-based vinyl conditioners, cargo pressing up into the tarp, driving with the panels open but not buckled, opening the cover with snow or ice on it and towing the truck from the rear. Approved claims are repaired or replaced at Extang's option after you obtain a return authorization number, with shipping to Extang at your expense.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight or oversized parcel and typically arrives in 3 to 7 business days.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.\u003c\/p\u003e\u003ch3\u003eAbout Extang\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 170px;max-width:170px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/extang-logo.png?v=1788712518\u0026amp;width=340\" alt=\"Extang logo\" width=\"170\" height=\"90\" loading=\"lazy\" decoding=\"async\" style=\"display:block;width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:260px;\"\u003e\n\u003cp\u003eExtang makes tonneau covers for pickup trucks. Its Trifecta line is a family of soft folding covers: the Trifecta 2.0, on which this ALX is based, plus the Trifecta Signature 2.0, the Trifecta e-Series and the Trifecta Toolbox 2.0. The ALX keeps the 2.0's feature set and pairs it with an updated rotary tailgate latch.\u003c\/p\u003e\n\u003cp\u003eExtang builds the Trifecta ALX from a set of named house components: pebble-grained marine-grade Ancona vinyl for the tarp, an aircraft-grade aluminum frame in textured-black EnduraCoat, dual-pivot MaxHinges and tool-free Jaw-Grip clamps. The company also sells Tonno Tonic, its own vinyl cleaner, which it recommends alongside plain soap and water in place of silicone conditioners.\u003c\/p\u003e\n\u003cp\u003eExtang backs the Trifecta ALX with a limited lifetime warranty that runs from the purchase date for the original owner, handled through its own customer service and a return authorization process. It also publishes vehicle-specific i-Sheet install guides, so a RamBox Ram, a Jeep Gladiator or a Honda Ridgeline each gets instructions written for that truck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Extang","offers":[{"title":"Default Title","offer_id":49335440343284,"sku":"EXT90421","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/extang-trifecta-alx-tonneau-cover-trifecta-alx-19-sierra-01_fb026194-9a42-4da2-be5c-e98ee7fe0f44.jpg?v=1788703485","url":"https:\/\/prestigetruck.com\/products\/extang-trifecta-alx-tonneau-cover-2019-2026-ram-1500-5-ft-7-in-bed-90421","provider":"Prestige Truck","version":"1.0","type":"link"}