{"product_id":"extang-trifecta-alx-tonneau-cover-2026-2027-ford-ranger-ranger-raptor-5-ft-1-in-bed-90639","title":"Extang Trifecta ALX Soft Folding Tonneau Cover for 2026-2027 Ford Ranger \/ Ranger Raptor (5'1\" Bed)","description":"\u003cp\u003eThe Extang Trifecta ALX Soft Folding Tonneau Cover (90639) fits the 2026-2027 Ford Ranger and Ranger Raptor with the 5'1\" bed. It is a soft tri-fold cover with pebble-grain DualShield vinyl and a one-hand rotary release that latches itself when closed. Heavy-duty aluminum MegaBows and dual-pivot hinges support the top, and it folds toward the cab for two thirds of the bed. It mounts with brackets in the bed-cap clip holes and at the tailgate slam bumpers, and Extang backs it with a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrifecta ALX cover assembly\u003c\/li\u003e\n\u003cli\u003eBulkhead seal\u003c\/li\u003e\n\u003cli\u003e2 cab brackets with Torx bolts and flange nuts\u003c\/li\u003e\n\u003cli\u003e2 striker brackets with driver and passenger tail latch brackets and 4 lock nuts (pre-assembled)\u003c\/li\u003e\n\u003cli\u003eT-20 and T-27 Torx wrenches and a 2.5mm hex key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOne-Hand Rotary Release\u003c\/strong\u003e\u003cbr\u003eDrop the tailgate, twist the rotary knob on the driver side and lift: the rear panel opens with one hand. Extang says this release is unique among soft tri-fold covers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLatches Itself When Closed\u003c\/strong\u003e\u003cbr\u003eLower the cover onto the bed and the Auto Latching System catches both latches on its own, so there are no tailgate clamps to set every time you close it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFolds for 2\/3 Bed Access\u003c\/strong\u003e\u003cbr\u003eFold the cover toward the cab and fasten both buckle straps for about two thirds of the bed. When a load needs every inch, the whole cover comes off in minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHand-Tightened Clamps\u003c\/strong\u003e\u003cbr\u003eT-handle clamps hold the cover to the bed rails at the cab. They tighten by hand with no drilling, and loosen the same way when you want the cover off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePebble-Grain DualShield Vinyl\u003c\/strong\u003e\u003cbr\u003eThe top is Extang's 50-grade DualShield vinyl, made in two layers with a pebble-grain finish. It is built for long service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMegaBows and Dual-Pivot Hinges\u003c\/strong\u003e\u003cbr\u003eHeavy-duty aluminum MegaBows and dual-pivot hinges support the vinyl so rain, hail and snow are less likely to make it sag, and Extang says they reduce wear over time.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-ext-90639 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-ext-90639\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-ext-90639\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-ext-90639 .pt-fit__tabs{display:none}#fit-ext-90639 .pt-fit__p{display:block!important}#fit-ext-90639 .pt-fitw{overflow:visible!important}#fit-ext-90639 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2026-2027\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e5'1\"\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2026-2027\u003c\/td\u003e\n\u003ctd\u003eRanger Raptor\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e5'1\"\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your bed:\u003c\/strong\u003e measure inside the bed floor from the bulkhead to the inside of the closed tailgate. Extang lists this bed as 5'1\".\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e other bed lengths or truck generations; each has its own Trifecta ALX part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Extang\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e 90639\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover Type:\u003c\/b\u003e Soft tri-fold\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e 50-grade DualShield two-layer vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Pebble (vinyl) grain, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrame:\u003c\/b\u003e Aluminum MegaBows, dual-pivot hinges\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Rotary release, auto latching when closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Access:\u003c\/b\u003e About 2\/3 folded; full bed with the cover removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Clamp-on, no drilling on most trucks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemoval:\u003c\/b\u003e Tool-free (hand-tightened clamps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSealing:\u003c\/b\u003e Integrated triple-fin weather seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Length:\u003c\/b\u003e 5'1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 750289906394\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eWhat's involved:\u003c\/b\u003e Factory bed-cap clips come out, brackets bolt into their holes and the tailgate slam-bumper holes, no drilling · \u003cb\u003eTime:\u003c\/b\u003e Under 1 hour · \u003cb\u003eDifficulty:\u003c\/b\u003e Level 1, simple installation · \u003cb\u003eTools:\u003c\/b\u003e T-20 and T-27 Torx wrenches and a 2.5mm hex key (included); T-30 and T-45 Torx drivers; 10mm socket or wrench; Isopropyl alcohol\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow Extang's install sheet (below) for your truck's exact bracket hardware and torque settings.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eStick on the bulkhead seal.\u003c\/b\u003e Wash the bulkhead top with soap and water, wipe it with isopropyl alcohol and let it dry. Peel the backing and press the seal on flush with the front edge, snug between the bed rails; trim it if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit the cab brackets.\u003c\/b\u003e Pry the two corner plastic clips out of each bed cap (center first) and keep them in the glove box. Fit each cab bracket in those holes with its bolt and nut, nut behind the sheet metal, and torque to 8 ft-lb (11 Nm) with a T-30 bit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit the tailgate brackets.\u003c\/b\u003e Remove the T-45 Torx screw from each tailgate slam bumper (keep it). Line the tail latch bracket up with that hole and the other hole in the bed side, refit the T-45 screw and add a T-30 screw, then torque the T-45 screw to 16 ft-lb (22 Nm) and the T-30 screw to 8 ft-lb (11 Nm), both sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlace, clamp and tether.\u003c\/b\u003e Set the folded cover over the cab end, unfold it, close the tailgate and adjust until the bulb seal fits the tailgate and the cover sits square (too far back and the tailgate won't close), then refold it without moving it. Hook each cab clamp under its metal cab bracket, not the plastic cap, and hand-tighten until it touches, then two more turns. Hook the tethers to the front tie-downs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClose, latch and adjust.\u003c\/b\u003e With the tailgate open and the cab clamps tight, close the cover, line each latch up with its striker and push down while you tighten the lock nuts with a 10mm socket or wrench. Then adjust the latches and rotary knob as the sheet shows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMake the final adjustment.\u003c\/b\u003e Loosen the striker nuts, push the cover (or pull the rear bow) down to the rail and tailgate, match both sides and torque the 10mm lock nuts to 8 ft-lb (11 Nm).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/extang-trifecta-alx-tonneau-cover-2ca91bae43c886591d514de836a05ee4.pdf?v=1792148382\" target=\"_blank\" rel=\"noopener\"\u003eExtang Trifecta ALX installation sheet (PDF)\u003c\/a\u003e, Extang's own step-by-step guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Extang covers the Trifecta ALX with a limited lifetime warranty against defects in materials and workmanship, starting on the date of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhat's covered: the rails, clamps, bows, aluminum parts, hardware and the vinyl top.\u003c\/li\u003e\n\u003cli\u003eA defective cover, tarp or part is repaired or replaced, at Extang's choice; Extang may substitute a newer model of similar form and function, or offer a warranty discount on a full replacement system.\u003c\/li\u003e\n\u003cli\u003eFor the original purchaser only, not transferable. Register the cover with Extang, or keep a detailed, dated receipt; contact us for registration help.\u003c\/li\u003e\n\u003cli\u003eTo keep it valid: clean with Extang Tonno Tonic or mild soap and water only (no conditioners with silicone or petroleum); drive only with the cover fully closed and held at all four clamps, or fully folded and buckled at the cab with both tethers attached; never drive with it partly open; keep cargo from touching the cover; clear snow, ice and debris before folding it; check the cab clamps after the first week and from time to time after that; take the cover off before the truck is towed from the rear.\u003c\/li\u003e\n\u003cli\u003eClaims: get a return authorization number from Extang first and write it on the outside of the package. Shipping to Extang is at your cost, Extang may ask for the part back postage prepaid, and shipping charges apply to any repair or replacement.\u003c\/li\u003e\n\u003cli\u003eNot covered: accidents, misuse, neglect, improper installation, servicing or removal, normal wear and tear, modifications, acts of God, interference with other accessories or trailers, and consequential or incidental damages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eBecause of its size, the cover ships by freight or as an oversized parcel.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e This cover ships in a large box. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout Extang\u003c\/h3\u003e\n\u003cp\u003eExtang is based in Ann Arbor, Michigan. Extang publishes a truck-specific install sheet for each Trifecta ALX version and backs the cover with a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe Trifecta ALX is Extang's soft tri-fold with the ALX rotary latch, the same one-hand latch used on the hard Solid Fold ALX and the low-profile Endure ALX.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty note.\u003c\/strong\u003e Extang's limited lifetime warranty applies to the original purchaser, with warranty registration on file or a detailed, dated receipt. Keep your order confirmation from us, and contact us for warranty claims and registration help.\u003c\/p\u003e","brand":"Extang","offers":[{"title":"Default Title","offer_id":67813374918900,"sku":"EXT90639","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/extang-trifecta-alx-tonneau-cover-a218eb821e79800c3a24f73de9b454b9-hero-crop-2to1.jpg?v=1792148253","url":"https:\/\/prestigetruck.com\/products\/extang-trifecta-alx-tonneau-cover-2026-2027-ford-ranger-ranger-raptor-5-ft-1-in-bed-90639","provider":"Prestige Truck","version":"1.0","type":"link"}