{"product_id":"icon-2-5-exp-series-coilover-2021-2023-ford-bronco-48601","title":"ICON Vehicle Dynamics 2.5 EXP Series Coilover for 2021-2023 Ford Bronco (48601)","description":"\u003cp\u003eThis 2.5 EXP Series coilover from ICON Vehicle Dynamics is built for the 2021-2023 Ford Bronco and reuses its factory coil spring. The valving is tuned for this vehicle with its stock spring, and the 2.5\" aluminum body carries more oil than the smaller factory shock. This listing covers part number 48601 and 48611.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your option:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePosition, Front:\u003c\/b\u003e A front EXP coilover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePosition, Rear:\u003c\/b\u003e A rear EXP coilover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift, 1.375-3\":\u003c\/b\u003e For Broncos with Ford's HOSS 1.0 suspension, identified by the black OE shock bodies (the base system on trims without the Sasquatch package). ICON lists 1.375\" to 3\" of front lift, set with the snap-ring grooves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift, 1.5-2.25\":\u003c\/b\u003e For Broncos with Ford's HOSS 1.0 suspension, identified by the black OE shock bodies. ICON lists 1.5\" to 2.25\" of rear lift, set with the snap-ring grooves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eICON 2.5 EXP Series coilover shock with its upper mount and spring seat, built to reuse the factory coil spring\u003c\/li\u003e\n\u003cli\u003eAny other parts listed for this vehicle in the Kit contents table\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe factory coil spring is reused and is not included. Parts named under Also required, such as sway bar brackets, upper control arms or rear shocks, are sold separately, as are wheels, tires and accessories seen in photos.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eReuses the Factory Spring\u003c\/strong\u003e\u003cbr\u003eEXP keeps the vehicle's OE coil spring, so the lift and the tuned 2.5\" shock come without the cost of new springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSnap-Ring Ride Height\u003c\/strong\u003e\u003cbr\u003eGrooves machined into the shock body take a snap ring that sets the spring seat, giving easily selectable ride height within the listed range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2.5 Aluminum Series Body\u003c\/strong\u003e\u003cbr\u003eThe shock is built on ICON's 2.5 Aluminum Series with an internal reservoir and a hard-anodized aluminum body for corrosion resistance and a consistent finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e7\/8\" Shaft, Mounted Shaft-Up\u003c\/strong\u003e\u003cbr\u003eAn induction-hardened, chrome-plated 7\/8\" shaft is used in the factory shaft-up orientation, with PTFE-lined bearings for low deflection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTuned With the Stock Spring\u003c\/strong\u003e\u003cbr\u003eICON tunes the valving for each vehicle together with its stock coil spring, and the larger body carries more oil for steadier damping on long rough runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRebuildable and Re-Valvable\u003c\/strong\u003e\u003cbr\u003eAny qualified shock technician can rebuild or re-valve an EXP shock, with parts available from ICON.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2021-2023 Ford Bronco, with the qualifiers shown in the table. Every option on this page is built for these vehicles; choose the configuration that matches your build and how you drive.\u003cbr\u003eNot for Sasquatch package vehicles.\u003cbr\u003e\u003cb\u003eQualifier:\u003c\/b\u003e excludes Sasquatch package\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e 2.5 EXP Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody diameter:\u003c\/b\u003e 2.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReservoir:\u003c\/b\u003e Internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShaft:\u003c\/b\u003e 7\/8\", induction hardened, chrome plated, shaft up\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoil spring:\u003c\/b\u003e Factory spring reused\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift (Front, 1.375-3\"):\u003c\/b\u003e 1.375-3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift (Rear, 1.5-2.25\"):\u003c\/b\u003e 1.5-2.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColor:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax tire size:\u003c\/b\u003e 35\" x 12.50\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax tire size (minor fender trimming):\u003c\/b\u003e 37\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift, front (Front, 1.375-3\"):\u003c\/b\u003e 1.375-3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended wheel offset:\u003c\/b\u003e 25mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock series:\u003c\/b\u003e 2.5 EXP Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock body diameter:\u003c\/b\u003e 2.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended tires (Front, 1.375-3\"):\u003c\/b\u003e 35\" x 12.50\" (Requires high clearance crash bars, ICON part number 42000. 37\" tire packages require coilover bump stop spacers along with trimming and modifications)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended tires (Rear, 1.5-2.25\"):\u003c\/b\u003e 35\" x 12.50\" (37\" tire packages require trimming and modifications)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift, rear (Rear, 1.5-2.25\"):\u003c\/b\u003e 1.5-2.25\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart numbers:\u003c\/b\u003e 48601 (Front, 1.375-3\"); 48611 (Rear, 1.5-2.25\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFit and install notes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRecommended tire size requires high clearance crash bars, ICON part number 42000 (Front, 1.375-3\")\u003c\/li\u003e\n\u003cli\u003eWhen running 37\" tires crash bar removal may be required, but is not recommended (Front, 1.375-3\")\u003c\/li\u003e\n\u003cli\u003eFor 37\" Tires Use Bump Stop Spacer Kit (Front, 1.375-3\")\u003c\/li\u003e\n\u003cli\u003eRequires Recalibration of Advanced Driver Assistance Systems (ADAS) After Install\u003c\/li\u003e\n\u003cli\u003eMay Require Part Number 48400DJ or 48500DJ (Front, 1.375-3\")\u003c\/li\u003e\n\u003cli\u003eLift heights above 2\" over stock may require aftermarket front upper control arms to maintain ideal front end alignment. (Front, 1.375-3\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eType: Coilover shock using the factory spring  ·  Install: Professional shop recommended  ·  Afterward: Alignment, plus ADAS recalibration on late-model vehicles\u003c\/p\u003e\u003cp\u003eOn this vehicle the EXP coilover replaces the factory shock and carries the factory coil spring. Where ICON publishes instructions for this part, they are summarized and linked below. Compressing a coil spring is hazardous work that needs a proper spring compressor, which is one reason ICON recommends a professional installer.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 48601:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Jack, Jack stands, Torque wrench, Ratchet, Extensions, Spring compressor, Pry bar, Flat blade screwdriver, External snap ring pliers, Drill, 1\/2\" drill bit, 5\/8\" socket\/wrench, 3\/4\" socket\/wrench and 8mm socket\/wrench and others listed in the guide\u003cbr\u003e\u003cb\u003eModification:\u003c\/b\u003e the guide includes cutting, drilling or grinding steps; read them before you start\u003cbr\u003e\u003cb\u003eAfterward:\u003c\/b\u003e the guide calls for a wheel alignment\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e the guide gives a torque value for each fastener it installs\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 48611:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Jack, Jack stands, Ratchet, extensions, Torque wrench, Phillips screwdriver, Body panel clip removal tool, Spring compressor, Drill, 1\/2\" drill bit, External retaing ring pliers, 3\/4\" socket\/wrench, 8mm socket\/wrench, 15mm socket\/wrench and 27mm socket\/wrench\u003cbr\u003e\u003cb\u003eModification:\u003c\/b\u003e the guide includes cutting, drilling or grinding steps; read them before you start\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-hoss-1-0-pkg-2-5-exp-front-coilover-install-guide-244c4d.pdf?v=1790624452\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 48601 (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 48601 (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-hoss-1-0-pkg-2-5-rear-exp-coilover-install-guide-21957e.pdf?v=1790624459\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 48611 (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 48611 (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON shock absorbers, coilovers included, carry a 1-year warranty against manufacturer's defects. A shock that fails in its first year goes back to ICON for inspection and service, and if ICON finds the failure came from neglect, improper installation or anything other than normal wear, the owner pays the service costs. Coverage is for the original retail purchaser who owns the vehicle the parts were first installed on, and ICON repairs or replaces a defective part at its discretion. Finish, parts worn through normal use, modifications, installation contrary to ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the US and Canada are excluded. Removal, installation and freight costs are not covered. \u003cstrong\u003eShipping.\u003c\/strong\u003e The carrier and ship method are set by the size and weight of the cartons when the order is placed. \u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Open every carton when it arrives and check each part and hardware bag against the parts list before the install starts. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for vehicles and SUVs in Riverside, California, and has been developing its systems since 2008. Engineering is led by head engineer and SCORE champion driver Dylan Evans, and the laser cutting, metal forming, CNC machining, welding and assembly are all done in house.\u003c\/p\u003e\n\u003cp\u003eICON's engineers start from the result they want a vehicle to have, study the forces acting on it in motion, and then develop and test parts both in everyday driving and in race conditions. EXP was developed to bridge the gap between spacer lifts and threaded-body coilovers, and it is built on the same 2.5 Aluminum Series shock ICON uses across its suspension systems.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Front \/ 1.375-3\"","offer_id":67606996353268,"sku":"48601","price":535.55,"currency_code":"USD","in_stock":true},{"title":"Rear \/ 1.5-2.25\"","offer_id":67606996386036,"sku":"48611","price":535.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-2-5-exp-series-coilover-icon-2-5-series-coilover-shock-body-with-1.jpg?v=1790686733","url":"https:\/\/prestigetruck.com\/products\/icon-2-5-exp-series-coilover-2021-2023-ford-bronco-48601","provider":"Prestige Truck","version":"1.0","type":"link"}