{"product_id":"icon-2-5-series-shock-absorbers-2007-2018-jeep-wrangler-27725cp","title":"ICON Vehicle Dynamics 2.5 Series Shock Absorbers for 2007-2018 Jeep Wrangler","description":"\u003cp\u003eThis ICON 2.5 Series shock pair is sized for the 2007-2018 Jeep Wrangler, with front and rear versions for 3\" and 4.5\" lifts. It suits owners who want damping tuned to the application, with a bump zone that firms up near full compression. Rear piggyback and front remote reservoir styles add oil to run cooler on long rough runs, and CDCV versions add an external compression adjuster with 10 settings. A stout shaft and bearings back it up, and every shock is rebuildable and revalveable.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTuned for Each Application\u003c\/strong\u003e\u003cbr\u003eICON sets the length and the damping tune of every 2.5 Series shock for its vehicle, using a one-piece digressive piston and 5WT shock oil that keeps damping steady across a wide temperature range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBump Zone Near Full Compression\u003c\/strong\u003e\u003cbr\u003eOn piggyback and selected remote reservoir parts, a billet 6061 manifold under the top cap creates ICON's internal Bump Zone, which adds about 20% more damping force near full compression to fend off harsh bottom outs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReservoir Style Choices\u003c\/strong\u003e\u003cbr\u003eInternal reservoir shocks keep everything in one body. Piggyback shocks carry the reservoir on the shock and remote reservoir shocks put it on a hose, and both add oil and cooling to reduce fade on long, hard runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompression Adjustment Options\u003c\/strong\u003e\u003cbr\u003eCDCV adds a 10-position compression knob, CDXS splits compression into high-speed and low-speed knobs with 10 settings each, and CDEV changes compression electronically through ICON Intelligent Control. ICON says piggyback and remote reservoir shocks can take a CDCV upgrade later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStout Shaft and Bearings\u003c\/strong\u003e\u003cbr\u003e2.5 Series shocks use a 7\/8\" induction-hardened, chrome-plated shaft with PTFE-lined spherical bearings, a strong, low-deflection combination for heavy trucks and rough ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRebuildable and Revalveable\u003c\/strong\u003e\u003cbr\u003eEvery 2.5 Series shock can be rebuilt when worn and revalved for a new load or use, so it can be serviced for years instead of thrown away.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-27725cp .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-27725cp\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-27725cp\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-27725cp .pt-fit__tabs{display:none}#fit-27725cp .pt-fit__p{display:block!important}#fit-27725cp .pt-fitw{overflow:visible!important}#fit-27725cp .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eJeep\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"n\"\u003e3\" lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"n\"\u003e4.5\" lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e match your year, model and the notes in each row: 2007-2018 Jeep Wrangler (3\" lift); 2007-2018 Jeep Wrangler (4.5\" lift).\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e years, models or trims outside those rows. Other shocks in this line for the same models: 27726CP\/27726P (2.5 Series Shock Absorbers, rear, 2.5\" lift, 2018-2023); 27821CP\/27821EP\/27821P (2.5 Series Shock Absorbers, front, 2.5\" lift, 2018-2023); 27840P (2.5 Series Shock Absorbers, front, 4.5\" lift, 2007-2017).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e Shock absorber\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e 2.5 Series (see the part title; a few parts are 2.0 Series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e Nitrogen-charged monotube\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Fixed valving, or CDCV, CDXS or CDEV where offered\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock Oil:\u003c\/b\u003e 5WT\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eService:\u003c\/b\u003e Fully rebuildable and revalveable\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePosition:\u003c\/b\u003e Front or rear, by part\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift:\u003c\/b\u003e 3\"; 4.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIn the Box:\u003c\/b\u003e Pair of shocks (one per side)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pt-fitw pt-varspec\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVersions\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr data-sku=\"27725CP\"\u003e\n\u003ctd\u003e27725CP\u003c\/td\u003e\n\u003ctd\u003eRear piggyback with CDCV, 3\" lift\u003c\/td\u003e\n\u003ctd\u003e840103401799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"27725P\"\u003e\n\u003ctd\u003e27725P\u003c\/td\u003e\n\u003ctd\u003eRear piggyback, 3\" lift\u003c\/td\u003e\n\u003ctd\u003e840103401805\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"27745CP\"\u003e\n\u003ctd\u003e27745CP\u003c\/td\u003e\n\u003ctd\u003eRear piggyback with CDCV, 4.5\" lift\u003c\/td\u003e\n\u003ctd\u003e840103401836\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"27745P\"\u003e\n\u003ctd\u003e27745P\u003c\/td\u003e\n\u003ctd\u003eRear piggyback, 4.5\" lift\u003c\/td\u003e\n\u003ctd\u003e840103401843\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"27820CP\"\u003e\n\u003ctd\u003e27820CP\u003c\/td\u003e\n\u003ctd\u003eFront remote reservoir with CDCV, 3\" lift\u003c\/td\u003e\n\u003ctd\u003e840103401867\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"27820P\"\u003e\n\u003ctd\u003e27820P\u003c\/td\u003e\n\u003ctd\u003eFront remote reservoir, 3\" lift\u003c\/td\u003e\n\u003ctd\u003e840103401874\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"27840CP\"\u003e\n\u003ctd\u003e27840CP\u003c\/td\u003e\n\u003ctd\u003eFront remote reservoir with CDCV, 4.5\" lift\u003c\/td\u003e\n\u003ctd\u003e840103401904\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRecommended installation:\u003c\/b\u003e Professional · \u003cb\u003eType:\u003c\/b\u003e Shock replacement at the factory mounts, most parts sold as a pair; remote reservoirs add a bracket · \u003cb\u003eTools:\u003c\/b\u003e Jack; Jack Stands; Welder; Black Spray Paint; Drill; 21\/64\" Drill Bit; Center Punch; Torque Wrench; Rest on ICON's sheet · \u003cb\u003eWhat's involved:\u003c\/b\u003e The factory front shocks come off, a lower shock doubler plate is welded to the axle housing, reservoir brackets are drilled into the frame rails, and plastic trim may need cutting for access; all hardware is re-torqued after 100 miles.\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values. These steps are for part 27820CP; the other parts on this page install from their own ICON sheet below.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUsing a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.\u003c\/li\u003e\n\u003cli\u003eUse a 16MM to remove the upper shock stem nut and remove the OEM shock.\u003c\/li\u003e\n\u003cli\u003eUse the (159007) weld sleeve to keep the space between the doubler plate and OEM shock as well as the (139004) spacer sleeve to keep the space between the OEM shock mount tabs. Mark on the axle to sand.\u003c\/li\u003e\n\u003cli\u003eUse a jack to lower the axle housing far enough to slide the top of the shock into position in the OEM shock location. Install stem hardware as seen in diagram.\u003c\/li\u003e\n\u003cli\u003eUse a 9\/16\" to thread the supplied 3\/8\" x 3\/4\" self tapping bolts into the frame rail, a minimum 2 full rotations.\u003c\/li\u003e\n\u003cli\u003eReinstall the wheels and lower the vehicle back to the ground. [Torque lugs to factory spec]\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-07-18-jk-3-in-rear-2-5-pb-cdcv-shock-install-guide-c16c1f.pdf?v=1790627154\" target=\"_blank\" rel=\"noopener\"\u003eICON 27725CP - 07-18 JK 3\" REAR 2.5 PB CDCV SHOCK (9-26-2019 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-07-18-jk-3-in-rear-2-5-pb-shock-install-guide-31d744.pdf?v=1790627161\" target=\"_blank\" rel=\"noopener\"\u003eICON 27725P - 07-18 JK 3\" REAR 2.5 PB SHOCK (9-26-2019 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-07-18-jk-3-in-front-2-5-rr-cdcv-shock-install-guide-765773.pdf?v=1790627167\" target=\"_blank\" rel=\"noopener\"\u003eICON 27820CP - 07-18 JK 3\" FRONT 2.5 RR CDCV SHOCK (9-26-2019 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-07-18-jk-3-in-front-2-5-rr-shock-install-guide-f96827.pdf?v=1790627174\" target=\"_blank\" rel=\"noopener\"\u003eICON 27820P - 07-18 JK 3\" FRONT 2.5 RR SHOCK (9-26-2019 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty term:\u003c\/strong\u003e 1 year (ICON shock absorber warranty)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON covers its shock absorbers, including the shock in every coilover, for 1 year against manufacturer's defects.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage belongs to the original retail buyer who owns the vehicle the part was first installed on.\u003c\/li\u003e\n\u003cli\u003eA shock that fails in its first year goes to ICON for inspection and service. If ICON finds the cause was neglect, poor installation or anything other than normal wear and tear, the owner pays for labor, parts and shipping.\u003c\/li\u003e\n\u003cli\u003eICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.\u003c\/li\u003e\n\u003cli\u003eNot covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.\u003c\/li\u003e\n\u003cli\u003eICON shocks leave the factory charged with nitrogen. Letting that charge out can make a shock malfunction, and ICON does not cover a failure caused by low nitrogen pressure.\u003c\/li\u003e\n\u003cli\u003eTo claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e These shocks ship charged with nitrogen: check each body, shaft, reservoir hose and adjuster knob as soon as the carton arrives, photograph any damage right away, and never let the nitrogen out. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eICON\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.\u003c\/p\u003e\n\u003cp\u003eICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized ICON Vehicle Dynamics dealer.\u003c\/strong\u003e Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Rear piggyback with CDCV, 3\" lift","offer_id":67828904100084,"sku":"27725CP","price":1525.95,"currency_code":"USD","in_stock":true},{"title":"Rear piggyback, 3\" lift","offer_id":67828904132852,"sku":"27725P","price":1193.5,"currency_code":"USD","in_stock":true},{"title":"Rear piggyback with CDCV, 4.5\" lift","offer_id":67828904165620,"sku":"27745CP","price":1504.15,"currency_code":"USD","in_stock":true},{"title":"Rear piggyback, 4.5\" lift","offer_id":67828904198388,"sku":"27745P","price":1264.35,"currency_code":"USD","in_stock":true},{"title":"Front remote reservoir with CDCV, 3\" lift","offer_id":67828904231156,"sku":"27820CP","price":1525.95,"currency_code":"USD","in_stock":true},{"title":"Front remote reservoir, 3\" lift","offer_id":67828904263924,"sku":"27820P","price":1302.5,"currency_code":"USD","in_stock":true},{"title":"Front remote reservoir with CDCV, 4.5\" lift","offer_id":67828904296692,"sku":"27840CP","price":1525.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-shocks-2-5-other-f0544.jpg?v=1792298257","url":"https:\/\/prestigetruck.com\/products\/icon-2-5-series-shock-absorbers-2007-2018-jeep-wrangler-27725cp","provider":"Prestige Truck","version":"1.0","type":"link"}