{"product_id":"icon-3-0-series-coilover-2010-2014-ford-f-150-svt-raptor-95000l","title":"ICON Vehicle Dynamics 3.0 Series Coilover for 2010-2014 Ford F-150 SVT Raptor (Front, CDCV)","description":"\u003cp\u003eThis ICON 3.0 Series front coilover fits the 2010-2014 Ford F-150 SVT Raptor only, as part of ICON's 1-3\" lift setup. It suits owners who want position-sensitive damping, with an internal hydraulic bump zone that firms it up over the last 40% of travel. CDCV gives external compression adjustment with 10 settings, and a remote reservoir adds oil to keep damping steady when the shock runs hot. It is sold as a driver or passenger unit, and the 3\" body is fully rebuildable.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3\" Body, More Piston Area\u003c\/strong\u003e\u003cbr\u003eThe 3\" body has 50% more piston area in the ride zone than a 2.5 Series shock, which steadies the vehicle in the roughest driving and shows on the road too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemote Reservoir on Every Coilover\u003c\/strong\u003e\u003cbr\u003eA remote reservoir adds oil and nitrogen volume plus cooling surface, so damping stays consistent as the shock heats up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Compression Damping\u003c\/strong\u003e\u003cbr\u003eDepending on the part, compression is tuned with a CDCV adjuster, a CDXS dual-speed valve or a CDEV valve run by ICON Intelligent Control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHydraulic Bump Zone\u003c\/strong\u003e\u003cbr\u003eA multi-stage hydraulic Bump Zone raises bottom-out resistance through the last 40% of compression travel, keeping big hits under control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTuned for the Vehicle\u003c\/strong\u003e\u003cbr\u003eEach coilover is valved and sprung for the vehicle it fits, with lengths and mounts designed around that platform's front suspension.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Rebuildable 3.0 Shocks\u003c\/strong\u003e\u003cbr\u003eICON's 3.0 Series shocks are fully serviceable, so they can be rebuilt or re-tuned instead of replaced.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-95000l .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-95000l\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-95000l\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-95000l .pt-fit__tabs{display:none}#fit-95000l .pt-fit__p{display:block!important}#fit-95000l .pt-fitw{overflow:visible!important}#fit-95000l .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"n\"\u003e1-3\" lift; SVT Raptor only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e match your year, model and the notes in each row: 2010-2014 Ford F-150 (1-3\" lift; SVT Raptor only).\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e years, models or trims outside those rows. Other coilover kits in this line for the same models: 95002 (3.0 Series Coilover, front, 2017-2020); 95003 (3.0 Series Coilover, front, 1-3\" lift, 2021-2025).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e Coilover assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e 3.0 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Diameter:\u003c\/b\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReservoir:\u003c\/b\u003e Remote\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eService:\u003c\/b\u003e Fully rebuildable and re-tunable\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePosition:\u003c\/b\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift:\u003c\/b\u003e 1-3\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pt-fitw pt-varspec\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVersions\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr data-sku=\"95000L\"\u003e\n\u003ctd\u003e95000L\u003c\/td\u003e\n\u003ctd\u003eDriver\u003c\/td\u003e\n\u003ctd\u003e840103408989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"95000R\"\u003e\n\u003ctd\u003e95000R\u003c\/td\u003e\n\u003ctd\u003ePassenger\u003c\/td\u003e\n\u003ctd\u003e840103408996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRecommended installation:\u003c\/b\u003e Professional · \u003cb\u003eType:\u003c\/b\u003e Front coilover assembly; many vehicles need companion ICON parts · \u003cb\u003eTools:\u003c\/b\u003e Jack; Jack Stands; Grinder W\/ Barrel Sander; Torque Wrench; Hammer; 5\/16\" Nut Driver; 9\/16\" Socket \/ Wrench; 15\/16\" Socket \/ Wrench; Rest on ICON's sheet · \u003cb\u003eWhat's involved:\u003c\/b\u003e The factory front coilovers come out, the coil bucket is trimmed 0.25\" to clear the reservoir hose fitting, and ICON 3.0 remote-reservoir coilovers bolt in with new upper hardware, followed by an alignment and a 100-mile re-torque.\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure truck is in gear or in park, set parking brake, turn off engine, and chock tires.\u003c\/li\u003e\n\u003cli\u003eUsing a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.\u003c\/li\u003e\n\u003cli\u003eRemove the (3) nuts securing the upper coil seat to the frame perch. Do not loosen or remove the larger center nut securing the spring seat to the shock shaft.\u003c\/li\u003e\n\u003cli\u003eBefore installing the new ICON coilover, the stock coil bucket will need to be trimmed to allow for clearance of the large hose attaching the remote reservoir and compression adjuster.\u003c\/li\u003e\n\u003cli\u003eInstall the upper mount using (3) 3\/8\" x 1.00\" bolts and (3) lock washers. Do not reuse old coilover hat.\u003c\/li\u003e\n\u003cli\u003eReinstall the wheels and lower the vehicle back to the ground. Roll the vehicle back and forth a couple of feet and bounce the front end to allow the suspension to settle to its new ride height.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-10-14-raptor-front-3-0-vs-coilover-rr-cdcv-shocks-install-guide-fc2ed6.pdf?v=1790625390\" target=\"_blank\" rel=\"noopener\"\u003eICON 95000 - 10-14 RAPTOR FRONT 3.0 VS COILOVER RR CDCV SHOCKS (10-12-2022 REV.C) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty term:\u003c\/strong\u003e 1 year (ICON shock absorber warranty)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON covers its shock absorbers, including the shock in every coilover, for 1 year against manufacturer's defects.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage belongs to the original retail buyer who owns the vehicle the part was first installed on.\u003c\/li\u003e\n\u003cli\u003eA shock that fails in its first year goes to ICON for inspection and service. If ICON finds the cause was neglect, poor installation or anything other than normal wear and tear, the owner pays for labor, parts and shipping.\u003c\/li\u003e\n\u003cli\u003eICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.\u003c\/li\u003e\n\u003cli\u003eNot covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.\u003c\/li\u003e\n\u003cli\u003eICON shocks leave the factory charged with nitrogen. Letting that charge out can make a shock malfunction, and ICON does not cover a failure caused by low nitrogen pressure.\u003c\/li\u003e\n\u003cli\u003eTo claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Coilovers ship assembled and charged with nitrogen: check the springs, shock bodies, reservoir hoses and hardware as soon as the carton arrives, photograph any damage right away, and never let the nitrogen out. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eICON\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.\u003c\/p\u003e\n\u003cp\u003eICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized ICON Vehicle Dynamics dealer.\u003c\/strong\u003e Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Driver","offer_id":67828905640180,"sku":"95000L","price":1765.29,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":67828905672948,"sku":"95000R","price":1765.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-coilovers-3-0-f0819.jpg?v=1792298201","url":"https:\/\/prestigetruck.com\/products\/icon-3-0-series-coilover-2010-2014-ford-f-150-svt-raptor-95000l","provider":"Prestige Truck","version":"1.0","type":"link"}