{"product_id":"icon-3-0-series-shock-absorbers-2022-2026-toyota-sequoia-tundra-57845cp","title":"ICON Vehicle Dynamics 3.0 Series Shock Absorbers for 2022-2026 Toyota Sequoia\/Tundra","description":"\u003cp\u003eThese ICON V.S. 3.0 Series shocks are sized and valved for the 2022-2026 Toyota Sequoia and Tundra, using a 3\" body for more oil volume and piston area than a 2.5\" shock. Each shock is built to the length and damping tune its application calls for, and it can be rebuilt and revalved later. This listing covers 3.0 Series part numbers 57845CP and 57845EP.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your option:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBuild, CDCV:\u003c\/b\u003e ICON's Compression Damping Control Valve adds an external knob with 10 compression settings, from soft to firm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild, CDEV:\u003c\/b\u003e ICON's Compression Damping Electronic Valve changes compression electronically from inside the vehicle and can adjust on the move through ICON Intelligent Control (IIC). It works with the IIC module and the CDEV parts listed in the notes for your vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe ICON 3.0 Series shocks named for your part: a pair on most parts, or a single side-specific shock where the part names a driver or passenger side\u003c\/li\u003e\n\u003cli\u003eThe reservoirs, mounting hardware and bushings listed for your part in the Kit contents table\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSome 3.0 parts depend on other parts to reach their full travel or to fit, such as ICON Delta Joint Pro upper control arms on extended-travel front shocks, a CDEV controller kit, or ICON's matching leaf spring and bump stop kits. Those are sold separately and listed in the notes for your vehicle.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eA 3\" Body\u003c\/strong\u003e\u003cbr\u003eThe 3\" body carries 50% more piston surface area than ICON's 2.5 Series, which steadies the vehicle when off-road driving gets extreme and pays off in everyday driving too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMore Oil, Less Fade\u003c\/strong\u003e\u003cbr\u003eA larger oil supply and more outside surface than a 2.5 Series shock shed heat faster, and remote reservoir designs push that further to resist fade during prolonged hard use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompression Adjustment Options\u003c\/strong\u003e\u003cbr\u003eMany applications offer CDCV with 10 compression settings on a knob, CDXS with separate high-speed and low-speed compression knobs, or CDEV for electronic adjustment from inside the vehicle through ICON Intelligent Control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBump Zone on Reservoir Shocks\u003c\/strong\u003e\u003cbr\u003eOn piggyback and specific remote reservoir applications, a billet aluminum manifold under the top cap forms ICON's internal Bump Zone, adding about 20% more damping force near full compression to help prevent harsh bottom outs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTuned per Application\u003c\/strong\u003e\u003cbr\u003eEvery 3.0 Series shock is configured for its vehicle in both length and damping tune, with premium 5WT shock oil for consistent damping over a wide temperature range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to Be Fully Serviceable\u003c\/strong\u003e\u003cbr\u003eEach 3.0 Series shock can be fully rebuilt and revalved, so they can be refreshed or retuned as your vehicle and driving change.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#ico-57845cp-3-0-series-shocks .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#ico-57845cp-3-0-series-shocks\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#ico-57845cp-3-0-series-shocks\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#ico-57845cp-3-0-series-shocks .pt-fit__tabs{display:none}#ico-57845cp-3-0-series-shocks .pt-fit__p{display:block!important}#ico-57845cp-3-0-series-shocks .pt-fitw{overflow:visible!important}#ico-57845cp-3-0-series-shocks .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eToyota\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003ccol style=\"width:40%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2023-2025\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2022-2026\u003c\/td\u003e\n\u003ctd\u003eTundra\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2022-2026 Toyota Sequoia and Tundra. Every option on this page is built for these vehicles; choose the configuration that matches your build and how you drive.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e 3.0 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePiston area:\u003c\/b\u003e 50% more than ICON 2.5 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eService:\u003c\/b\u003e 100% rebuildable and revalveable\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 1 year (ICON shock absorber warranty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift:\u003c\/b\u003e 0-1.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax rear lift for use with (CDCV):\u003c\/b\u003e 2\" \/ 4\" \/ 3.5\" \/ 1\" \/ 1.5\" \/ 3\" (varies by vehicle configuration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax rear lift for use with (CDEV):\u003c\/b\u003e 4\" \/ 2\" \/ 3.5\" \/ 1\" \/ 1.5\" \/ 3\" (varies by vehicle configuration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFor use with lift (CDCV):\u003c\/b\u003e 1.5\" Suspension Lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReservoir:\u003c\/b\u003e Remote Reservoir\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock series:\u003c\/b\u003e 3.0 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock body diameter:\u003c\/b\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eValving (CDCV):\u003c\/b\u003e CDCV\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eValving (CDEV):\u003c\/b\u003e CDEV\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart numbers:\u003c\/b\u003e 57845CP (CDCV); 57845EP (CDEV)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEstimated install time:\u003c\/b\u003e 1 to 2 hours (ICON install guide)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e Professional install recommended by ICON\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFit and install notes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlso Requires Part Number 58770E or 58775E (CDEV)\u003c\/li\u003e\n\u003cli\u003eRequires iOS operated device to run ICON Intelligent Control App (CDEV)\u003c\/li\u003e\n\u003cli\u003eAlso Requires Part Number 53508 (CDEV)\u003c\/li\u003e\n\u003cli\u003eAlso Requires Part Number 58770E, 58772E, or 58775E (CDEV)\u003c\/li\u003e\n\u003cli\u003eAlso requires installation of applicable IIC kit and CDEV front shocks (CDEV)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eType: Shock replacement, most parts sold as a pair  ·  Install: Professional installer recommended by ICON  ·  Afterward: Retorque the hardware after the first 100 miles\u003c\/p\u003e\u003cp\u003eThe ICON guide for this vehicle lists the tools, reservoir mounting and any extra parts the install needs. Take care when the axle hangs without shocks attached, because the brake lines can overstretch, and retorque all hardware after the first 100 miles.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 57845CP:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Ratchets, Extension, Drill, 11\/32 drill bit, Sharpie, 8mm wrench, 17mm socket\/wrench, 19mm socket\/wrench, 9\/16\" socket\/wrench, 5\/16\" nut driver or flat blade screw and Driver\u003cbr\u003e\u003cb\u003eModification:\u003c\/b\u003e the guide includes cutting, drilling or grinding steps; read them before you start\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 57845EP:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Jack, Jack stands, Ratchets, Extension, Drill, 11\/32 drill bit, Sharpie, 8mm wrench, 17mm socket\/wrench, 19mm socket\/wrench, 9\/16\" socket\/wrench, 5\/16\" nut driver or flat blade screw and Driver\u003cbr\u003e\u003cb\u003eModification:\u003c\/b\u003e the guide includes cutting, drilling or grinding steps; read them before you start\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-22-up-tundra-rear-3-0-vs-rr-cdcv-install-guide-aa50df.pdf?v=1790627629\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 57845CP (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 57845CP (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-22-up-tundra-rear-3-0-vs-rr-cdev-install-guide-0098f9.pdf?v=1790627635\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 57845EP (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 57845EP (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON warrants its shock absorbers for 1 year against manufacturer's defects. A shock that fails in its first year of ownership must be shipped to ICON Vehicle Dynamics for inspection and service, and if ICON finds the failure came from neglect, improper installation or anything other than normal wear and tear, the owner pays the service costs, including labor, parts and shipping. Coverage is for the original retail purchaser who owns the vehicle the part was first installed on, and ICON repairs or replaces a defective part at its discretion. Finish, alterations, installation contrary to ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada are not covered, and neither are removal, installation or freight costs. The shocks leave ICON charged with nitrogen: releasing that pressure can make a shock malfunction, and a failure caused by low nitrogen pressure is not covered. \u003cstrong\u003eShipping.\u003c\/strong\u003e The carrier and ship method are set by the size and weight of the cartons when the order is placed. Larger orders can arrive in more than one carton. \u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Open every carton when it arrives and check each shock, reservoir and hardware bag against the parts list in the ICON guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim. ICON notes that some finish damage can happen in shipping and is not covered by its warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics is a performance suspension manufacturer in Riverside, California, building aftermarket suspension components and shock absorbers for vehicles and SUVs since 2008. Its engineering is led by head engineer and SCORE champion driver Dylan Evans, and the team starts each project by defining how the finished vehicle should drive, then studies the forces acting on it in motion to decide what to change. Laser cutting, metal forming, CNC machining, welding and assembly all happen in house, and products are tested in real-world use as well as race conditions.\u003c\/p\u003e\n\u003cp\u003eThe 3.0 Series is ICON's step up from its 2.0 and 2.5 Series shocks, for heavy vehicles and vehicles driven hard off road. ICON's Raptor development work produced its 3.0 Zeta bypass shocks, including the RXT rear bypass with a dual-hose remote reservoir, alongside the brand's adjustable CDCV, CDXS and CDEV valves.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"CDCV","offer_id":67607010541812,"sku":"57845CP","price":2179.95,"currency_code":"USD","in_stock":true},{"title":"CDEV","offer_id":67607010574580,"sku":"57845EP","price":2506.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-3-0-series-shock-absorbers-rendered-pair-of-silver-icon-3-0-vs-1_89403ca8-3211-4e3f-b8bc-1db8a64ab4a1.jpg?v=1790686739","url":"https:\/\/prestigetruck.com\/products\/icon-3-0-series-shock-absorbers-2022-2026-toyota-sequoia-tundra-57845cp","provider":"Prestige Truck","version":"1.0","type":"link"}