{"product_id":"icon-hydraulic-bump-stop-kit-2005-2023-toyota-tacoma-56103","title":"ICON Vehicle Dynamics Hydraulic Bump Stop Kit for 2005-2023 Toyota Tacoma (Rear)","description":"\u003cp\u003eICON designed this rear hydraulic bump stop kit around the 2005-2023 Toyota Tacoma. ICON found room to improve on the factory rear stops in rough terrain, and this hydraulic system is the result: more bottom-out control, less kick. ICON's velocity and position sensitive design adds force quickly near full compression without hurting flex. The ICON sheet for this part includes drilling, cutting or trimming steps.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eControl at the End of Travel\u003c\/strong\u003e\u003cbr\u003eA bump stop manages the last part of compression. ICON's stops take over where the factory rubber stops store energy and release it with a jolt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVelocity-Sensitive Hydraulic Damping\u003c\/strong\u003e\u003cbr\u003eICON's hydraulic stops add more damping the faster they are hit, so big impacts are absorbed without limiting articulation on slow terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts Built per Vehicle\u003c\/strong\u003e\u003cbr\u003eEach kit is made for its platform and position, with brackets and hardware for that truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess Rear End Kick Off-Road\u003c\/strong\u003e\u003cbr\u003eControlled release of the stored energy keeps the rear from kicking up after a hard hit, which ICON says improves control in rough terrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpeed and Position Sensitive\u003c\/strong\u003e\u003cbr\u003eResistance climbs steeply deep in the travel because the stops respond to both shaft speed and position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks With Your Shocks\u003c\/strong\u003e\u003cbr\u003eThe stops run alongside the shocks and only come into play near the end of compression.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-56103 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-56103\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-56103\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-56103 .pt-fit__tabs{display:none}#fit-56103 .pt-fit__p{display:block!important}#fit-56103 .pt-fitw{overflow:visible!important}#fit-56103 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eToyota\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2005-2023\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e match your year, model and the notes in each row: 2005-2023 Toyota Tacoma.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e years, models or trims outside those rows. Other bump stop kits in this line for the same model: 56123 (2\" Hydraulic Bump Stop Kit, rear, 2024-2026).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e 56103\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePosition:\u003c\/b\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 840103402956\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRecommended installation:\u003c\/b\u003e Professional · \u003cb\u003eType:\u003c\/b\u003e Hydraulic, air or foam bump stop kit replacing factory stops · \u003cb\u003eTools:\u003c\/b\u003e Jack; Jack Stands; Grinder W\/ Cut-Off Wheel; Air Chisel; 1\/4\" Socket \/ Wrench; 5\/8\" Socket \/ Wrench; 7\/16\" Socket \/ Wrench; Torque Wrench · \u003cb\u003eWhat's involved:\u003c\/b\u003e The rear bump stop striker plates come off by grinding out and, if needed, drilling the frame rivets; new air bump brackets bolt into the rivet holes, striker plates mount on the leaf springs, and everything is re-torqued after 100 miles.\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUsing a properly rated jack, raise the rear of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.\u003c\/li\u003e\n\u003cli\u003eRemove the bump stop striker plate from the frame. There are 4 rivets attaching the striker plate to the frame that must be removed. The recommended rivet removing method is as follows although some people have other methods.\u003c\/li\u003e\n\u003cli\u003eWith the bracket removed position the new air bump bracket on the frame. It is designed to use the existing rivet holes. Bolt it to the frame using (4) 7\/16 x 1.5\" bolts, nuts and washers per side.\u003c\/li\u003e\n\u003cli\u003eInstall the new striker plate on leaf spring. Support the axle with a jack. Remove the u-bolts and remove the stock rubber bump stop.\u003c\/li\u003e\n\u003cli\u003eApply antiseize to the bump stop cylinder before sliding it into the bracket.\u003c\/li\u003e\n\u003cli\u003eReinstall the wheels and lower the vehicle back to the ground. [Torque to factory spec]\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-05-up-tacoma-rear-air-bump-system-install-guide-083b91.pdf?v=1790628763\" target=\"_blank\" rel=\"noopener\"\u003eICON 56103 - 05-UP TACOMA REAR AIR BUMP SYSTEM (10-28-2020 REV.E) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty term:\u003c\/strong\u003e ICON limited warranty (ICON's published terms); claims through us\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage belongs to the original retail buyer who owns the vehicle the part was first installed on.\u003c\/li\u003e\n\u003cli\u003eICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.\u003c\/li\u003e\n\u003cli\u003eICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.\u003c\/li\u003e\n\u003cli\u003eNot covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.\u003c\/li\u003e\n\u003cli\u003eTo claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Check each bump stop body, the brackets and the hardware bag as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eICON\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.\u003c\/p\u003e\n\u003cp\u003eICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized ICON Vehicle Dynamics dealer.\u003c\/strong\u003e Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":67828914127092,"sku":"56103","price":1079.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-bump-stops-acb2b0c1.jpg?v=1792298144","url":"https:\/\/prestigetruck.com\/products\/icon-hydraulic-bump-stop-kit-2005-2023-toyota-tacoma-56103","provider":"Prestige Truck","version":"1.0","type":"link"}