{"product_id":"icon-lower-link-kit-2021-2026-ford-bronco-44000","title":"ICON Vehicle Dynamics Lower Link Kit for 2021-2026 Ford Bronco (Rear)","description":"\u003cp\u003eThis ICON Vehicle Dynamics rear lower link kit fits the 2021-2026 Ford Bronco, in billet or tubular builds. The billet links are CNC machined 6061 aluminum, anodized against corrosion, while the tubular links use .313 wall DOM tube with a black powder coat and a high-clearance shape. Each link pairs a PTFE-lined FK rod end with ICON's double adjuster at one end and a greaseless multi-durometer bushing at the other, so the axle moves freely while vibration is damped. Length is set on the vehicle, and installation includes some drilling, cutting or trimming.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLength Set on the Vehicle\u003c\/strong\u003e\u003cbr\u003eLink length can be tuned on the vehicle, through ICON's double adjuster or threaded rod ends, without removing the link.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBillet or DOM Tube Build\u003c\/strong\u003e\u003cbr\u003eICON builds these links from CNC-machined 6061 aluminum billet or from DOM steel tube; the title and specs name the build of this kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFK Rod Ends and Bearings\u003c\/strong\u003e\u003cbr\u003ePTFE-lined FK rod ends and spherical bearings take the place of soft factory bushings, cutting deflection and the bind that limits stock suspension travel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnodized or Powder-Coated Finish\u003c\/strong\u003e\u003cbr\u003eBillet parts are anodized against corrosion and tubular parts carry a multi-stage powder coat, so the links hold up to road salt and trail grime.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeometry Matched to Lift\u003c\/strong\u003e\u003cbr\u003eLinks are sized for lifted vehicles, helping restore suspension geometry once the ride height changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuiet Greaseless Bushings\u003c\/strong\u003e\u003cbr\u003eWhere a bushing is used, ICON fits multi durometer or dual-durometer high-angle bushings that run quietly and need no periodic greasing.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-44000 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-44000\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-44000\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-44000 .pt-fit__tabs{display:none}#fit-44000 .pt-fit__p{display:block!important}#fit-44000 .pt-fitw{overflow:visible!important}#fit-44000 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e match your year, model and the notes in each row: 2021-2026 Ford Bronco.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e years, models or trims outside those rows. This is the only link kit in this ICON line for this model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePosition:\u003c\/b\u003e Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift:\u003c\/b\u003e Per part, as ICON lists it\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Anodized 6061 aluminum (billet); Black powder coat (tubular)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pt-fitw pt-varspec\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVersions\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr data-sku=\"44000\"\u003e\n\u003ctd\u003e44000\u003c\/td\u003e\n\u003ctd\u003eBillet\u003c\/td\u003e\n\u003ctd\u003e840103411828\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"44000T\"\u003e\n\u003ctd\u003e44000T\u003c\/td\u003e\n\u003ctd\u003eTubular\u003c\/td\u003e\n\u003ctd\u003e840103412313\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRecommended installation:\u003c\/b\u003e Professional · \u003cb\u003eType:\u003c\/b\u003e Link arm, link kit or sway bar link replacing factory links · \u003cb\u003eTools:\u003c\/b\u003e Floor Jack; Jack Stands (4); Tape Measure \u0026amp; Fine-Tip Felt Marker; Cut-Off Wheel; Flat Screwdriver; Soft Dead Blow Hammer; Pry Bar; Spud Bar; Fuel Line Disconnect Tool; Rest on ICON's sheet · \u003cb\u003eWhat's involved:\u003c\/b\u003e The fuel tank is lowered for access, the factory rear lower links come off, the ICON links bolt in, and the axle-end pivot bolt keeper tab is cut 1-1\/4\" shorter; pinion angle can be adjusted, with a re-torque after 100 miles.\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values. These steps are for part 44000T; the other parts on this page install from their own ICON sheet below.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the vehicle is parked on a flat, level surface with the transmission in PARK the parking brake set and the engine turned off.\u003c\/li\u003e\n\u003cli\u003eInstall the passenger side lower link first, which will require lowering the fuel tank to access the frame-side pivot bolts. Begin by disconnecting the wiring harness from the rear of the fuel tank.\u003c\/li\u003e\n\u003cli\u003eDisconnect the wiring harness from the top of the fuel tank.\u003c\/li\u003e\n\u003cli\u003eUse the 24mm socket and rachet to remove the front lower link pivot bolt and nut from the axle end of the lower link. Remove the OE lower link and set it aside as it will not be re-used.\u003c\/li\u003e\n\u003cli\u003eUse a T25 Torx driver to re-install the pivot bolt cover on the inboard side of the frame rail at the axle end pivot bolt, which was removed in a previous step.\u003c\/li\u003e\n\u003cli\u003eIf custom pinion angle is desired you can adjust this with the vehicle on the ground. Do not adjust further than 3.375\" from the center of the rod end to the edge of the billet link.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-billet-rear-lower-link-kit-install-guide-d09140.pdf?v=1790627774\" target=\"_blank\" rel=\"noopener\"\u003eICON 44000 - 21-UP BRONCO BILLET REAR LOWER LINK KIT (10-20-2021 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-tubular-rear-lower-link-kit-install-guide-a61c23.pdf?v=1790627794\" target=\"_blank\" rel=\"noopener\"\u003eICON 44000T - 21-UP BRONCO TUBULAR REAR LOWER LINK KIT (5-25-2021 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty term:\u003c\/strong\u003e ICON limited warranty (ICON's published terms); claims through us\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage belongs to the original retail buyer who owns the vehicle the part was first installed on.\u003c\/li\u003e\n\u003cli\u003eICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.\u003c\/li\u003e\n\u003cli\u003eICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.\u003c\/li\u003e\n\u003cli\u003eNot covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.\u003c\/li\u003e\n\u003cli\u003eTo claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Check every link, rod end, bushing and the hardware bag as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eICON\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.\u003c\/p\u003e\n\u003cp\u003eICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized ICON Vehicle Dynamics dealer.\u003c\/strong\u003e Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Billet","offer_id":67828915011828,"sku":"44000","price":1761.39,"currency_code":"USD","in_stock":true},{"title":"Tubular","offer_id":67828915044596,"sku":"44000T","price":762.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-link-arms-2ae798a8.jpg?v=1792298224","url":"https:\/\/prestigetruck.com\/products\/icon-lower-link-kit-2021-2026-ford-bronco-44000","provider":"Prestige Truck","version":"1.0","type":"link"}