{"product_id":"icon-stage-suspension-system-2021-2026-ford-bronco-k40011","title":"ICON Vehicle Dynamics Stage Suspension System for 2021-2026 Ford Bronco (HOSS 2.0, 0-2\" Lift)","description":"\u003cp\u003eThis ICON Vehicle Dynamics suspension system is engineered for the 2021-2026 Ford Bronco and is offered here in the configurations ICON lists for it. Any extra part this vehicle needs, such as a differential drop or a skid plate spacer, is named under Also required so the install can be planned ahead. This listing covers part numbers K40011, K40012 and K40012T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your option:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eStage, Stage 1:\u003c\/b\u003e Stage 1 of the systems ICON offers for this vehicle. Stage numbers are set per vehicle, and a higher stage generally adds or upgrades parts over the lower ones. The Kit contents table lists exactly what this stage includes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStage, Stage 2:\u003c\/b\u003e Stage 2 of the systems ICON offers for this vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild, Standard:\u003c\/b\u003e The base configuration of this stage for the vehicle. The Kit contents table lists every part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild, Billet UCA:\u003c\/b\u003e Billet aluminum upper control arms, built for strength and durability with on-vehicle caster and camber adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild, Tubular UCA:\u003c\/b\u003e Tubular steel upper control arms that add strength and correct front-end geometry, with extra caster built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe ICON parts listed for this stage and vehicle in the Kit contents table\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eWheels, tires, bumpers, lights and other accessories seen in photos are not included, and neither is the wheel alignment or driver-assist recalibration. Parts named under Also required for a vehicle, such as a differential drop, a skid plate spacer or a brake line kit, are sold separately.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBuilt in Stages\u003c\/strong\u003e\u003cbr\u003eEach vehicle's systems run from an entry stage upward, so the suspension can match a daily driver, a tow rig or a dedicated trail vehicle, and the stage number shows where a kit sits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngineered Per Platform\u003c\/strong\u003e\u003cbr\u003eICON develops each system around one vehicle's geometry, with shock lengths, valving and spring rates chosen for that platform rather than adapted from a universal kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eServiceable ICON Shocks\u003c\/strong\u003e\u003cbr\u003eICON shocks are fully rebuildable and re-tunable, so worn seals or a change in how the vehicle is used can be handled with a rebuild or re-valve instead of new shocks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Valving Options\u003c\/strong\u003e\u003cbr\u003eHigher stages on many vehicles add CDCV valves with 10 compression settings, CDXS valves with separate low and high speed adjustment, or CDEV valves that ICON Intelligent Control adjusts on the move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpper Control Arm Choices\u003c\/strong\u003e\u003cbr\u003eWhere a stage adds upper control arms, choose billet aluminum arms with on-vehicle caster and camber adjustment or tubular steel arms with extra caster built in. Both correct front-end geometry at the lifted height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLift Quoted on Stock Vehicles\u003c\/strong\u003e\u003cbr\u003eEvery lift range is quoted for a stock-equipped vehicle. Bumpers, winches and other added weight change where the height settles, so allow for them when choosing a kit.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2021-2026 Ford Bronco. Every option on this page is built for these vehicles; choose the configuration that matches your build and how you drive.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct type:\u003c\/b\u003e Staged suspension system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift measured on:\u003c\/b\u003e Stock-equipped vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e Professional shop or service technician recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift:\u003c\/b\u003e 0-2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended wheel offset (Stage 1, Standard; Stage 2, Tubular UCA):\u003c\/b\u003e 25mm \/ 0mm (varies by vehicle configuration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax tire size:\u003c\/b\u003e 35\" x 12.50\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift, rear:\u003c\/b\u003e 0-1.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax tire size (minor fender trimming):\u003c\/b\u003e 37\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift, front:\u003c\/b\u003e 0-2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock series:\u003c\/b\u003e 2.0 Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock body diameter:\u003c\/b\u003e 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUpper control arms (Stage 2, Billet UCA):\u003c\/b\u003e Billet UCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUpper control arms (Stage 2, Tubular UCA):\u003c\/b\u003e Tubular UCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart numbers:\u003c\/b\u003e K40011 (Stage 1, Standard); K40012 (Stage 2, Billet UCA); K40012T (Stage 2, Tubular UCA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFit and install notes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRecommended tire size requires high clearance crash bars, ICON part number 42000\u003c\/li\u003e\n\u003cli\u003eWhen running 37\" tires crash bar removal may be required, but is not recommended\u003c\/li\u003e\n\u003cli\u003eFor 37\" Tires Use Bump Stop Spacer Kit\u003c\/li\u003e\n\u003cli\u003eRequires Recalibration of Advanced Driver Assistance Systems (ADAS) After Install\u003c\/li\u003e\n\u003cli\u003eMay Require Part Number 48400DJ or 48500DJ (Stage 1, Standard)\u003c\/li\u003e\n\u003cli\u003eLift heights above 1.5\" over stock may require aftermarket front upper control arms to maintain ideal front end alignment (Stage 1, Standard)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKit contents\u003c\/strong\u003e\u003c\/p\u003e\u003ctable style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align:left;\"\u003ePart number\u003c\/th\u003e\n\u003cth style=\"text-align:left;\"\u003eComponents\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eK40011\u003cbr\u003eStage 1, Standard\u003c\/td\u003e\n\u003ctd\u003e(2) 48602 21-current Bronco Hoss 2.0 Pkg 2.5 Front EXP Coilover\u003cbr\u003e(2) 48612 21-current Bronco Hoss 2.0 Pkg 2.5 Rear EXP Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eK40012\u003cbr\u003eStage 2, Billet UCA\u003c\/td\u003e\n\u003ctd\u003e(1) 48500DJ 21-current Bronco Billet UCA DJ Pro Kit\u003cbr\u003e(2) 48602 21-current Bronco Hoss 2.0 Pkg 2.5 Front EXP Coilover\u003cbr\u003e(2) 48612 21-current Bronco Hoss 2.0 Pkg 2.5 Rear EXP Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eK40012T\u003cbr\u003eStage 2, Tubular UCA\u003c\/td\u003e\n\u003ctd\u003e(1) 48400DJ 21-current Bronco Tubular UCA DJ Pro Kit\u003cbr\u003e(2) 48602 21-current Bronco Hoss 2.0 Pkg 2.5 Front EXP Coilover\u003cbr\u003e(2) 48612 21-current Bronco Hoss 2.0 Pkg 2.5 Rear EXP Coilover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eType: Staged suspension system  ·  Install: Professional shop recommended  ·  Afterward: Alignment, plus ADAS recalibration on many vehicles\u003c\/p\u003e\u003cp\u003eOn this vehicle the ICON parts in the Kit contents table replace the matching factory components. Where ICON publishes instructions for this vehicle, they are summarized and linked below, including any cutting, drilling or extra parts they call for. Recheck all hardware after the first miles and periodically after that, as ICON's instructions direct.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 48612 and 48611:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Jack, Jack stands, Ratchet, extensions, Torque wrench, Phillips screwdriver, Body panel clip removal tool, Spring compressor, Drill, 1\/2\" drill bit, External retaing ring pliers, 3\/4\" socket\/wrench, 8mm socket\/wrench, 15mm socket\/wrench and 27mm socket\/wrench\u003cbr\u003e\u003cb\u003eModification:\u003c\/b\u003e the guide includes cutting, drilling or grinding steps; read them before you start\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 48602:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Jack, Jack stands, Torque wrench, Ratchet, Extensions, Spring compressor, Pry bar, Flat blade screwdriver, External snap ring pliers, Drill, 1\/2\" drill bit, 5\/8\" socket\/wrench, 3\/4\" socket\/wrench and 8mm socket\/wrench and others listed in the guide\u003cbr\u003e\u003cb\u003eModification:\u003c\/b\u003e the guide includes cutting, drilling or grinding steps; read them before you start\u003cbr\u003e\u003cb\u003eAfterward:\u003c\/b\u003e the guide calls for a wheel alignment\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e the guide gives a torque value for each fastener it installs\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 48500DJ:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Jack, Jack stands, Ratchets, Extensions, Phillips screwdriver, Body clip removal tool, Torque wrench, 3\/8 12-pt, 8mm socket\/wrench, 10mm socket\/wrench, 18mm socket\/wrench, 21mm socket\/wrench and 24mm socket\/wrench\u003cbr\u003e\u003cb\u003eAfterward:\u003c\/b\u003e the guide calls for a wheel alignment\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e the guide gives a torque value for each fastener it installs\u003c\/p\u003e\u003cp\u003e\u003cb\u003eICON guide for part 48400DJ:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Jack stands, Jacks, Ratchets, Extensions, Phillips screwdriver, Body clip removal tool, Torque wrench, 3\/8 12-pt, 8mm socket\/wrench, 10mm socket\/wrench, 18mm socket\/wrench, 21mm socket\/wrench and 24mm socket\/wrench\u003cbr\u003e\u003cb\u003eAfterward:\u003c\/b\u003e the guide calls for a wheel alignment\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e the guide gives a torque value for each fastener it installs\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-hoss-2-0-pkg-2-5-rear-exp-coilover-install-guide-02cfc9.pdf?v=1790624474\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 48612 and 48611 (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 48612 and 48611 (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-hoss-2-0-pkg-2-5-exp-front-coilover-install-guide-604431.pdf?v=1790624466\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 48602 (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 48602 (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-billet-uca-dj-pro-kit-install-guide-443dcc.pdf?v=1790627754\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 48500DJ (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 48500DJ (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-tubular-uca-dj-pro-kit-install-guide-603db5.pdf?v=1790627758\" target=\"_blank\" rel=\"noopener\" title=\"Official ICON installation guide for part 48400DJ (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial ICON installation guide for part 48400DJ (PDF)\u003c\/a\u003e: the ICON Vehicle Dynamics step-by-step guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON shock absorbers, coilovers included, carry a 1-year warranty against manufacturer's defects, and a shock that fails in its first year goes back to ICON for inspection and service. ICON's fabricated suspension components are covered by its limited lifetime warranty. Coverage is for the original retail purchaser who owns the vehicle the parts were first installed on, and ICON repairs or replaces a defective part at its discretion. Finish, parts worn through normal use, modifications, installation contrary to ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the US and Canada are excluded. Removal, installation and freight costs are not covered. ICON also requires its components to be installed as the complete kit shown in its application guide; substituting or leaving out required parts voids the warranty. The Delta Joint and Delta Joint PRO in ICON upper control arms carry their own terms: 5 years for the Delta Joint when it is registered within 30 days of purchase, and 1 year for the Delta Joint PRO. \u003cstrong\u003eShipping.\u003c\/strong\u003e The carrier and ship method are set by the size and weight of the cartons when the order is placed. Larger systems can ship in several cartons or by freight. \u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Open every carton when it arrives and check each part and hardware bag against the parts list before the install starts. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for vehicles and SUVs in Riverside, California, and has been developing its systems since 2008. Engineering is led by head engineer and SCORE champion driver Dylan Evans, and the laser cutting, metal forming, CNC machining, welding and assembly are all done in house.\u003c\/p\u003e\n\u003cp\u003eICON's engineers start from the result they want a vehicle to have, study the forces acting on it in motion, and then develop and test parts both in everyday driving and in race conditions. Its stage systems combine ICON shocks and coilovers, springs, control arms and link kits made for each platform, and its CDCV, CDXS and CDEV valves let owners tune compression damping to the terrain.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Stage 1 \/ Standard","offer_id":67607089610996,"sku":"K40011","price":2142.19,"currency_code":"USD","in_stock":true},{"title":"Stage 2 \/ Billet UCA","offer_id":67607089643764,"sku":"K40012","price":3582.14,"currency_code":"USD","in_stock":true},{"title":"Stage 2 \/ Tubular UCA","offer_id":67607089676532,"sku":"K40012T","price":3022.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-stage-suspension-system-studio-kit-layout-on-white-set-of-1_2b0548b9-8d13-4839-90c4-af5f28fddc96.jpg?v=1790686786","url":"https:\/\/prestigetruck.com\/products\/icon-stage-suspension-system-2021-2026-ford-bronco-k40011","provider":"Prestige Truck","version":"1.0","type":"link"}