{"product_id":"icon-upper-control-arm-kit-w-delta-joint-pro-2021-2026-ford-bronco-48400dj","title":"ICON Vehicle Dynamics Upper Control Arm Kit w\/ Delta Joint PRO for 2021-2026 Ford Bronco (Front)","description":"\u003cp\u003eThis ICON front upper control arm kit with the Delta Joint PRO fits the 2021-2026 Ford Bronco and is designed to give ICON's extended travel coilovers more room to work. The Delta Joint PRO is larger than the standard Delta Joint, gives up to 90 degrees of free articulation and is fully rebuildable. Choose the tubular arms (48400DJ) in CNC-bent, black powder-coated DOM steel or the billet arms (48500DJ) machined from 6061 aluminum with on-vehicle caster and camber adjustment. Finish with an alignment after fitting the arms.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDelta Joint High-Angle Ball Joint\u003c\/strong\u003e\u003cbr\u003eICON's patented Delta Joint pairs ball-joint toughness with uniball-like articulation. Newer kits use the larger, rebuildable Delta Joint PRO with up to 90 degrees of free articulation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Travel With ICON Coilovers\u003c\/strong\u003e\u003cbr\u003eThe arms are designed to give ICON's extended travel coilovers room to work, adding droop and wheel travel over the factory arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaster Corrected for Lifted Trucks\u003c\/strong\u003e\u003cbr\u003eICON builds caster correction into its arms so a lifted truck can be aligned to better specs, for steadier steering and tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Tubular or Billet Arms\u003c\/strong\u003e\u003cbr\u003eTubular arms are CNC-bent DOM steel with a powder coat. Billet arms are machined 6061 aluminum, anodized, with on-vehicle caster and camber adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eServiceable Bushings and Rod Ends\u003c\/strong\u003e\u003cbr\u003eTubular arms use greaseable, rebuildable dual stage bushings at the frame pivots, and billet arms use PTFE-lined rod ends there, so either version stays responsive and serviceable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Suspension Component Clearance\u003c\/strong\u003e\u003cbr\u003eICON shapes its arms, including the H-beam billet designs, for better clearance around the coilover and other front suspension parts.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-48400dj .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-48400dj\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-48400dj\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-48400dj .pt-fit__tabs{display:none}#fit-48400dj .pt-fit__p{display:block!important}#fit-48400dj .pt-fitw{overflow:visible!important}#fit-48400dj .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e match your year, model and the notes in each row: 2021-2026 Ford Bronco.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e years, models or trims outside those rows. This is the only upper control arm kit in this ICON line for this model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e Upper control arm kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePosition:\u003c\/b\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Semi-gloss black powder coat (tubular); Anodized 6061 aluminum (billet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pt-fitw pt-varspec\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVersions\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr data-sku=\"48400DJ\"\u003e\n\u003ctd\u003e48400DJ\u003c\/td\u003e\n\u003ctd\u003eTubular\u003c\/td\u003e\n\u003ctd\u003e840103412344\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"48500DJ\"\u003e\n\u003ctd\u003e48500DJ\u003c\/td\u003e\n\u003ctd\u003eBillet\u003c\/td\u003e\n\u003ctd\u003e840103412306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRecommended installation:\u003c\/b\u003e Professional · \u003cb\u003eType:\u003c\/b\u003e Upper control arm kit with Delta Joint ball joints · \u003cb\u003eWhat's involved:\u003c\/b\u003e The ball joints come off the spindles and the factory upper control arms come out, the tubular arms with grease zerks and Delta Joints bolt in, then an alignment and a re-torque after 100 miles follow. · \u003cb\u003eTools:\u003c\/b\u003e Jack Stands, Jacks, Ratchets, Extensions, Phillips Screwdriver, Body Clip Removal Tool, Torque Wrench, 3\/8 12-Pt, and the rest on ICON's sheet\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values. These steps are for part 48400DJ; the other parts on this page install from their own ICON sheet below.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eLift vehicle and securely place heavy duty jack stands under the manufacturer recommended lifting locations for the front of the vehicle. Take care when lifting the vehicle, and allow 3-4\" of ground clearance from the tire.\u003c\/li\u003e\n\u003cli\u003eRemove balljoint from the spindle using an 18mm, leave the nut on loosely. To free the taper from the spindle, a hammer or balljoint separator can be used.\u003c\/li\u003e\n\u003cli\u003eSupport the spindle so the CV joints do not overextend and remove the balljoint nut.\u003c\/li\u003e\n\u003cli\u003eInstall the supplied 90* grease zerks into the bushings housings, making sure the zerks point out, towards the tire.\u003c\/li\u003e\n\u003cli\u003eInstall the delta joint into the spindle using the supplied nut and 21mm. [Torque to 75 ft-lbs]\u003c\/li\u003e\n\u003cli\u003eReinstall wheels and tires, lower to ground and get professionally aligned.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-tubular-uca-dj-pro-kit-install-guide-603db5.pdf?v=1790627758\" target=\"_blank\" rel=\"noopener\"\u003eICON 48400DJ - 21-UP BRONCO TUBULAR UCA DJ PRO KIT (4-22-2022 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-bronco-billet-uca-dj-pro-kit-install-guide-443dcc.pdf?v=1790627754\" target=\"_blank\" rel=\"noopener\"\u003eICON 48500DJ - 21-UP BRONCO BILLET UCA DJ PRO KIT (1-12-2024 REV.B) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON's upper control arms carry its Limited Lifetime Warranty, and the ball joint carries its own Delta Joint or Delta Joint PRO terms.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage belongs to the original retail buyer who owns the vehicle the part was first installed on.\u003c\/li\u003e\n\u003cli\u003eICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.\u003c\/li\u003e\n\u003cli\u003eThe Delta Joint carries 5 years of coverage from the purchase date, but only when ICON's warranty registration is completed within 30 days of purchase; contact us and we will help you register. The Delta Joint PRO carries 1 year from the purchase date. Neither is transferable to a later owner, and neither applies when the joint runs with a suspension system that is not ICON's.\u003c\/li\u003e\n\u003cli\u003eICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.\u003c\/li\u003e\n\u003cli\u003eNot covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.\u003c\/li\u003e\n\u003cli\u003eTo claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Check both arms, the Delta Joints, bushings, dust caps and hardware as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eICON\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.\u003c\/p\u003e\n\u003cp\u003eICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized ICON Vehicle Dynamics dealer.\u003c\/strong\u003e Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Tubular","offer_id":67828922319092,"sku":"48400DJ","price":879.95,"currency_code":"USD","in_stock":true},{"title":"Billet","offer_id":67828922351860,"sku":"48500DJ","price":1439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-upper-control-arms-3aefc1d7.jpg?v=1792298346","url":"https:\/\/prestigetruck.com\/products\/icon-upper-control-arm-kit-w-delta-joint-pro-2021-2026-ford-bronco-48400dj","provider":"Prestige Truck","version":"1.0","type":"link"}