{"product_id":"icon-upper-control-arm-kit-w-delta-joint-pro-2021-2026-ford-f-150-98522dj","title":"ICON Vehicle Dynamics Upper Control Arm Kit w\/ Delta Joint PRO for 2021-2026 Ford F-150 (Front)","description":"\u003cp\u003eThis ICON Vehicle Dynamics upper control arm kit fits the front of the 2021-2026 Ford F-150 in tubular or billet form. Tubular arms are CNC-bent DOM steel with a black powder coat, while billet arms are machined from 6061 aluminum in a hybrid H-beam shape with PTFE-lined rod ends and adjuster sleeves for on-vehicle alignment. The Delta Joint PRO is a larger joint that articulates up to 90 degrees without bind. It is fully rebuildable with an anodized billet cap over its grease fitting, and an alignment is the last install step.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDelta Joint High-Angle Ball Joint\u003c\/strong\u003e\u003cbr\u003eICON's patented Delta Joint pairs ball-joint toughness with uniball-like articulation. Newer kits use the larger, rebuildable Delta Joint PRO with up to 90 degrees of free articulation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Travel With ICON Coilovers\u003c\/strong\u003e\u003cbr\u003eThe arms are designed to give ICON's extended travel coilovers room to work, adding droop and wheel travel over the factory arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaster Corrected for Lifted Trucks\u003c\/strong\u003e\u003cbr\u003eICON builds caster correction into its arms so a lifted truck can be aligned to better specs, for steadier steering and tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Tubular or Billet Arms\u003c\/strong\u003e\u003cbr\u003eTubular arms are CNC-bent DOM steel with a powder coat. Billet arms are machined 6061 aluminum, anodized, with on-vehicle caster and camber adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eServiceable Bushings and Rod Ends\u003c\/strong\u003e\u003cbr\u003eTubular arms use greaseable, rebuildable dual stage bushings at the frame pivots, and billet arms use PTFE-lined rod ends there, so either version stays responsive and serviceable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Suspension Component Clearance\u003c\/strong\u003e\u003cbr\u003eICON shapes its arms, including the H-beam billet designs, for better clearance around the coilover and other front suspension parts.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-98522dj .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-98522dj\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-98522dj\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-98522dj .pt-fit__tabs{display:none}#fit-98522dj .pt-fit__p{display:block!important}#fit-98522dj .pt-fitw{overflow:visible!important}#fit-98522dj .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2021-2026\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e match your year, model and the notes in each row: 2021-2026 Ford F-150.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e years, models or trims outside those rows. Other upper control arm kits in this line for the same models: 98500DJ (Tubular Upper Control Arm Kit w\/ Delta Joint, 2004-2020); 98505DJ (Billet Upper Control Arm Kit w\/ Delta Joint, 2009-2020); 98562DJ (Billet Upper Control Arm Kit w\/ Delta Joint, 2010-2020); 98564DJ (Billet Upper Control Arm Kit w\/ Delta Joint PRO, 2021-2025).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e ICON Vehicle Dynamics\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e Upper control arm kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePosition:\u003c\/b\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Semi-gloss black powder coat (tubular); Anodized 6061 aluminum (billet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pt-fitw pt-varspec\"\u003e\u003ctable\u003e\n\u003ccaption\u003eVersions\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr data-sku=\"98522DJ\"\u003e\n\u003ctd\u003e98522DJ\u003c\/td\u003e\n\u003ctd\u003eTubular\u003c\/td\u003e\n\u003ctd\u003e840103423715\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-sku=\"98523DJ\"\u003e\n\u003ctd\u003e98523DJ\u003c\/td\u003e\n\u003ctd\u003eBillet\u003c\/td\u003e\n\u003ctd\u003e840103423722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eRecommended installation:\u003c\/b\u003e Professional · \u003cb\u003eType:\u003c\/b\u003e Upper control arm kit with Delta Joint ball joints · \u003cb\u003eTools:\u003c\/b\u003e Jack; Jack Stands; Torque Wrench; 10mm Socket \/ Wrench; 18mm Socket \/ Wrench; 21mm Socket \/ Wrench; 27mm Socket \/ Wrench; 9\/16\" Socket \/ Wrench; Rest on ICON's sheet · \u003cb\u003eWhat's involved:\u003c\/b\u003e For the upper control arms: the tie rod, sway bar links and factory arms come off, billet arms bolt into the frame mounts, equipped trucks get a frame bracket lowered 3\/4\" with a drilled hole, then alignment and re-torque follow.\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values. These steps are for part 98523DJ; the other parts on this page install from their own ICON sheet below.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUsing a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.\u003c\/li\u003e\n\u003cli\u003eDisconnect the tie rod from the knuckle using a 21mm and 10mm wrench.\u003c\/li\u003e\n\u003cli\u003eRemove the sway-bar link and upper control arm from the spindle. Support spindle with a jack or strap to prevent the CV (4x4) or brake lines from over extending (18mm, 21mm, T45 Torx).\u003c\/li\u003e\n\u003cli\u003eUse a screwdriver to lift the clip nut and relocate it down 3\/4\". Mark the center of the hole and drill it out to 1\/2\".\u003c\/li\u003e\n\u003cli\u003ePlace the ICON upper control arm into the mounts on the chassis and hand tighten using OEM hardware.\u003c\/li\u003e\n\u003cli\u003eHave the vehicle professionally aligned.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-up-f150-tubular-uca-dj-pro-kit-install-guide-8025b3.pdf?v=1790627964\" target=\"_blank\" rel=\"noopener\"\u003eICON 98522DJ - 21-UP F150 TUBULAR UCA DJ PRO KIT (5-17-2023 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-21-23-f150-billet-uca-dj-pro-kit-install-guide-5fd613.pdf?v=1790627950\" target=\"_blank\" rel=\"noopener\"\u003eICON 98523DJ - 21-23 F150 BILLET UCA DJ PRO KIT (9-28-2023 REV.A) (PDF)\u003c\/a\u003e, ICON's own install sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e ICON's upper control arms carry its Limited Lifetime Warranty, and the ball joint carries its own Delta Joint or Delta Joint PRO terms.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage belongs to the original retail buyer who owns the vehicle the part was first installed on.\u003c\/li\u003e\n\u003cli\u003eICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.\u003c\/li\u003e\n\u003cli\u003eThe Delta Joint carries 5 years of coverage from the purchase date, but only when ICON's warranty registration is completed within 30 days of purchase; contact us and we will help you register. The Delta Joint PRO carries 1 year from the purchase date. Neither is transferable to a later owner, and neither applies when the joint runs with a suspension system that is not ICON's.\u003c\/li\u003e\n\u003cli\u003eICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.\u003c\/li\u003e\n\u003cli\u003eNot covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.\u003c\/li\u003e\n\u003cli\u003eTo claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Check both arms, the Delta Joints, bushings, dust caps and hardware as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout ICON Vehicle Dynamics\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eICON\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.\u003c\/p\u003e\n\u003cp\u003eICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized ICON Vehicle Dynamics dealer.\u003c\/strong\u003e Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Tubular","offer_id":67828922384628,"sku":"98522DJ","price":879.95,"currency_code":"USD","in_stock":true},{"title":"Billet","offer_id":67828922417396,"sku":"98523DJ","price":1429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/icon-upper-control-arms-8483b3b1.jpg?v=1792298354","url":"https:\/\/prestigetruck.com\/products\/icon-upper-control-arm-kit-w-delta-joint-pro-2021-2026-ford-f-150-98522dj","provider":"Prestige Truck","version":"1.0","type":"link"}