{"product_id":"leer-latitude-soft-folding-tonneau-cover","title":"LEER Latitude Soft Folding Tonneau Cover","description":"\u003cp\u003eLEER's Latitude folds in three panels: double-coated, reinforced vinyl with a cross-weave backing, held taut by a self-tensioning frame, with corners rounded and double stitched and cushioned seals around the edge. Two fingers on the CYNC latch open it from either side, it folds toward the cab when you need the bed, and it clamps on without drilling. LEER makes a version for each truck and bed length, each backed by LEER's limited lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eTwo-finger CYNC latch\u003c\/strong\u003e\u003cbr\u003eOpening the cover takes a two-finger pinch on LEER's patented CYNC latch at the tailgate end, and it works from either side of the bed. Whichever side you walk up on, you can get into the bed without reaching across.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-tensioning frame\u003c\/strong\u003e\u003cbr\u003eThe frame under the Latitude tensions itself, so the vinyl stays pulled tight across all three panels without you adjusting it. Once it is shut, LEER's adjustable cover buckles, with security buckles as a backup, keep the cover pinned to the frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReinforced commercial-grade vinyl\u003c\/strong\u003e\u003cbr\u003eLEER double-coats a reinforced, commercial-grade vinyl and backs it with a flexible cross-weave fabric. To keep it looking right, wash it with mild soap and water only: LEER says abrasive pads and harsh cleaners can dull the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRounded, double-stitched corners\u003c\/strong\u003e\u003cbr\u003eEvery corner is rounded, reinforced and double stitched, which gives the cover a fitted look on the bed. LEER builds the corners so they will not fold up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeveled edges and perimeter seals\u003c\/strong\u003e\u003cbr\u003eBeveled edges are shaped to let rain run off, and cushioned seals with fabric extensions ring the perimeter to keep the cover snug against the bed. The Latitude also closes with the tailgate up or down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo-drill clamp-on fit\u003c\/strong\u003e\u003cbr\u003eThe cover clamps to the bed rails with front twist-knob clamps and rear clamps, and nothing gets drilled. LEER says one person can put the Latitude on or take it off the truck.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your fit:\u003c\/strong\u003e pick the Latitude version made for your truck's years, model and bed length. Measure the bed floor from the front wall to the inside of the closed tailgate. Versions in the line: Nissan Frontier: 630102 (2013-2021 Nissan Frontier, 4'11\" bed), 630129 (2013-2021 Nissan Frontier, 6'1\" bed), 630335 (2022-2025 Nissan Frontier, 5' bed), 630336 (2022-2025 Nissan Frontier, 6'1\" bed); Silverado 1500 \/ Sierra 1500: 630300 (2019-2025 Chevrolet Silverado 1500, 2022 Chevrolet Silverado 1500 LTD, 2019-2025 GMC Sierra 1500 and 2022 GMC Sierra 1500 Limited, 5'10\" bed), 630301 (2019-2025 Chevrolet Silverado 1500, 2022 Chevrolet Silverado 1500 LTD and 2019-2025 GMC Sierra 1500, 6'7\" bed), 630120 (2014-2018 Chevrolet Silverado 1500 and 2014-2018 GMC Sierra 1500, 5'9\" bed), 630170 (2014-2018 Chevrolet Silverado 1500, 2014-2018 GMC Sierra 1500, 2019 Chevrolet Silverado 1500 LD and 2019 GMC Sierra 1500 Limited, 6'7\" bed); Silverado HD \/ Sierra HD: 630320 (2020-2025 Chevrolet Silverado 2500 HD\/Silverado 3500 HD and 2020-2025 GMC Sierra 2500 HD\/Sierra 3500 HD, 6'10\" bed); Colorado \/ Canyon: 630105 (2015-2022 Chevrolet Colorado and 2015-2022 GMC Canyon, 5'2\" bed), 630130 (2015-2022 Chevrolet Colorado and 2015-2022 GMC Canyon, 6'2\" bed); Ford F-150: 630112 (2015-2020 Ford F-150, 2021-2025 Ford F-150\/F-150 Raptor, 2017-2020 Ford F-150 Raptor and 2022-2025 Ford F-150 Lightning, 5'7\" bed), 630169 (2015-2020 Ford F-150 and 2021-2025 Ford F-150, 6'7\" bed), 630284 (2004-2014 Ford F-150, 5'7\" bed), 630285 (2004-2014 Ford F-150, 6'7\" bed); Nissan Titan: 630115 (2017-2024 Nissan Titan, 5'7\" bed), 630172 (2017-2024 Nissan Titan, 6'7\" bed), 630293 (2017-2024 Nissan Titan, 5'7\" bed), 630294 (2017-2024 Nissan Titan, 6'7\" bed); Dodge \/ Ram: 630117 (2009-2010 Dodge Ram 1500, 2011-2018 Ram 1500 and 2019 Ram 1500 Classic, 5'7\" bed), 630137 (2009-2010 Dodge Ram 1500, 2011-2018 Ram 1500, 2019 Ram 1500 Classic, 2010 Dodge Ram 2500\/3500 and 2011-2021 Ram 2500\/3500, 6'4\" bed), 630298 (2019-2025 Ram 1500, 5'7\" bed), 630299 (2019-2025 Ram 1500, 6'4\" bed); Toyota Tacoma: 630286 (2016-2023 Toyota Tacoma, 5'1\" bed), 630288 (2016-2023 Toyota Tacoma, 6'2\" bed), 630345 (2024-2025 Toyota Tacoma, 5' bed); Toyota Tundra: 630116 (2014-2021 Toyota Tundra, 5'7\" bed), 630173 (2014-2021 Toyota Tundra, 6'7\" bed), 630289 (2014-2021 Toyota Tundra, 5'7\" bed), 630290 (2014-2021 Toyota Tundra, 6'7\" bed), 630337 (2022-2025 Toyota Tundra, 5'7\" bed), 630338 (2022-2025 Toyota Tundra, 6'7\" bed); F-250 \/ F-350 Super Duty: 630400 (2008-2016 Ford F-250 Super Duty\/F-350 Super Duty and 2017-2022 Ford F-250 Super Duty\/F-350 Super Duty, 6'10\" bed); Ford Ranger: 630303 (2019-2023 Ford Ranger, 5'1\" bed), 630342 (2024-2025 Ford Ranger\/Ranger Raptor, 5' bed); Ford Maverick: 630331 (2022-2025 Ford Maverick, 4'6\" bed).\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e trucks with RamBox or the 60\/40 Multifunction Tailgate, which LEER says the Latitude will not work with.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e LEER\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e LEER Latitude\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover style:\u003c\/b\u003e Soft tri-fold (folding) tonneau cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover material:\u003c\/b\u003e Reinforced commercial-grade vinyl, double-coated, flexible cross-weave backing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrame:\u003c\/b\u003e Self-tensioning frame system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch:\u003c\/b\u003e CYNC latch, two-finger release from either side of the bed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHold-downs:\u003c\/b\u003e Adjustable cover buckles plus security buckles\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCorners:\u003c\/b\u003e Rounded, reinforced, double-stitched\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeals:\u003c\/b\u003e Cushioned perimeter seals with fabric extensions; beveled edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Clamps to the bed rails, no drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTailgate:\u003c\/b\u003e Closes with the tailgate open or shut\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIn the box:\u003c\/b\u003e Soft cover assembly and hardware package\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware package:\u003c\/b\u003e 2 rear clamp assemblies, 2 front twist-knob clamp assemblies, 2.5mm and 5mm Allen wrenches\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoverage:\u003c\/b\u003e 36 truck-specific versions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Clamps to the bed rails, no drilling · \u003cb\u003eWhat's involved:\u003c\/b\u003e The folded cover is set at the cab end and unfolded into alignment, then held by hand-tightened front clamps under the bed rail flanges and rear clamps that carry the CYNC latch strike plate · \u003cb\u003eTools:\u003c\/b\u003e 2.5mm Allen wrench; 5mm Allen wrench\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow LEER's install sheet (below) for the exact positions and hardware.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWash the truck bed if dirty, set the folded cover over the cab end of the bed, then unfold it and adjust its position for proper cab-to-tailgate alignment.\u003c\/li\u003e\n\u003cli\u003eLine the cover up at the front and side to side, then carefully refold it without shifting its position on the bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAnchor the front panel and fit the secondary clamps with security buckles:\u003c\/b\u003e choose the insert that best aligns the clamp to the bed side, position the clamp under the bed-wall flange (or on the bracket assembly), hand-tighten until it contacts the rail, then two more turns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWith the front clamps secure, close the cover completely.\u003c\/b\u003e Place each rear clamp under the bed rail, hand-tighten the flower nut until contact, then tighten both 5mm Allen screws (the flower nut may then be removed and kept).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjust the strike plate and the CYNC latch one side at a time:\u003c\/b\u003e loosen both set screws, slide the catch to touch the striker plate (add a wrench width of clearance if the cover closes too hard), tighten the latch-guide set screw, pull the inner latch until it has tension and tighten its set screw; repeat on the other side.\u003c\/li\u003e\n\u003cli\u003eBefore driving, the cover must be completely flat and secured with all clamps fastened; never drive with the cover partly open.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/leer-latitude-owners-manual.pdf?v=1791159528\" target=\"_blank\" rel=\"noopener\"\u003eLEER Latitude Installation Instructions and Owner's manual (PDF)\u003c\/a\u003e, LEER's own install guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e The Latitude carries LEER's Limited Lifetime Warranty: LEER promises the cover is free of material and workmanship defects, and the coverage lasts as long as the original purchaser keeps it on the original truck.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWho and where: the original retail purchaser only, on the original owner's truck. The warranty is not transferable.\u003c\/li\u003e\n\u003cli\u003eConditions: the cover must be properly installed and not modified, and LEER asks for the original sales receipt as proof of purchase.\u003c\/li\u003e\n\u003cli\u003eRemedy: LEER repairs or replaces a cover that proves defective, at its sole discretion.\u003c\/li\u003e\n\u003cli\u003eNot covered: damage caused by accidents, neglect or abuse, by inappropriate use or a faulty install, or by acts of God; a cover lost off the truck to wind or while driving (checking the clamps before you drive is the owner's job); paint damage to the truck; damage from careless unpacking, such as opening the carton with a box cutter; a panel hinge bent too far, usually from hauling cargo taller than the bed sides with the cover closed; use outside the cover's specifications or intended application; installing or operating it against the manual; and consequential damage, including to cargo or the truck bed.\u003c\/li\u003e\n\u003cli\u003eShipping damage: LEER excludes damage caused by a parcel carrier in transit, so tell us right away and we will file the claim with the carrier.\u003c\/li\u003e\n\u003cli\u003eCare: clean with mild soap and water only. LEER says chemicals and harsh fluids can damage the vinyl and seals and void the warranty.\u003c\/li\u003e\n\u003cli\u003eRegistration: LEER's manual says the cover must be registered for the warranty to be valid. Contact us and we will help you register it.\u003c\/li\u003e\n\u003cli\u003eTo start a claim, contact us with your order number and photos and we will take it up with LEER for you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Open the carton without a blade, then check the cover assembly and the hardware package (rear clamps, front twist-knob clamps and both Allen wrenches) against the parts list in LEER's manual before you start. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout LEER\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 20px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eLEER\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eBased in Elkhart, Indiana, LEER builds truck caps and tonneau covers. LEER backs them with its own limited warranty; for any claim, contact us and we handle it with LEER.\u003c\/p\u003e\n\u003cp\u003eIn the LEER tonneau line, the Latitude is the soft tri-fold cover, alongside the SR250 soft roll-up cover and the HF350M and HF650M hard folding covers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eBuying LEER from Prestige Truck.\u003c\/strong\u003e Keep your Prestige Truck order email with your records: LEER asks for the original sales receipt as proof of purchase on a Latitude claim. For registration, replacement parts or a claim, contact us with your order number and we will work with LEER for you.\u003c\/p\u003e\u003c\/div\u003e","brand":"Leer","offers":[{"title":"Default Title","offer_id":67697518215412,"sku":"LER-PARENT-LATITUDE","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/leer-latitude-latitude-hero-crop-n0028.jpg?v=1792335407","url":"https:\/\/prestigetruck.com\/products\/leer-latitude-soft-folding-tonneau-cover","provider":"Prestige Truck","version":"1.0","type":"link"}