{"product_id":"n-fab-podium-bed-access-nerf-step-bars-for-2007-2021-toyota-tundra-double-cab-6-ft-7-in-bed-hpt0792qc-6","title":"N-Fab Podium Bed Access Nerf Step Bars for 2007-2021 Toyota Tundra (Double Cab, 6'7\" Bed)","description":"\u003cp\u003eThe N-Fab Podium Bed Access is a wheel to wheel stainless steel hoop step: a 3\" main tube carries a 4.75\" enclosed step at each cab door plus a third step at the bedside. The series comes in textured black powder coat over stainless and in polished stainless. If you reach into the bed of a 2007-2021 Toyota Tundra double cab every workday, a bedside step saves you from leaning over the rail from the ground. This listing is N-Fab part number HPT0792QC-6, finished in textured black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2x Podium bed access step bars (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThird Step at the Bedside\u003c\/strong\u003e\u003cbr\u003eA third step sits at the bedside behind the cab steps, so reaching gear near the front of the bed or in a crossover toolbox no longer means standing on a tire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3\" Stainless Steel Tube\u003c\/strong\u003e\u003cbr\u003eThe one-piece main tube is 3\" stainless steel, fully welded, so corrosion resistance comes from the metal as well as from the finish on top of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4.75\" Enclosed Step Plates\u003c\/strong\u003e\u003cbr\u003eEach step plate is 4.75\" wide and enclosed, which gives a boot a flat, secure landing getting into the cab or up to the bed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRuns Wheel to Wheel\u003c\/strong\u003e\u003cbr\u003eThe bar spans from the front wheel opening to the rear, covering the rocker panels and the lower bedside against stones, curbs and trail debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBolt-On, No Drilling\u003c\/strong\u003e\u003cbr\u003eEach application is bracketed for one cab and bed length and bolts to factory mounting points. None of the Podium Bed Access install guides calls for drilling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as a Pair\u003c\/strong\u003e\u003cbr\u003eEvery order is a driver-side and a passenger-side bar with the mounting hardware for that application.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2007-2021 Toyota Tundra double cab with the 6'7\" bed. Fits 6'7\" Beds Only. Match your cab and bed length before ordering: each bar is built for one body style.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e N-Fab Podium Bed Access\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStep material:\u003c\/b\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMain tube:\u003c\/b\u003e 3\" diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStep width:\u003c\/b\u003e 4.75\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStep type:\u003c\/b\u003e Hoop step with bed access step\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength:\u003c\/b\u003e Wheel to wheel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e One-piece, fully welded\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Rocker panel, bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold as:\u003c\/b\u003e Pair (driver and passenger)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e HPT0792QC-6-TX\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Textured Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Lifetime structural + 5-year powder-coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-on, no drilling  ·  \u003cb\u003eTools:\u003c\/b\u003e Common hand tools: sockets, wrenches and a ratchet, plus a torque wrench where the guide lists a torque value  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Moderate DIY; the bars are long, so plan on a helper\u003c\/p\u003e\u003cp\u003eEach bar hangs from vehicle-specific brackets that bolt to factory mounting points at the rocker panel, and none of the Podium Bed Access install guides calls for drilling. The bars are long, so have a second person hold each one while you start the fasteners by hand, set the bar parallel to the body along its full length, then tighten to the values in your application's guide. Recheck every fastener after the first few weeks of driving and again at routine service, because a bar that is never rechecked can settle. The installation guide for this application uses the factory mounting points and does not call for drilling. The guide specifies fastener torque of 20 ft-lb, 20-25 ft-lb and 30 ft-lb.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/n-fab-hpt0792qc-6-installation-instructions.pdf?v=1790370264\" target=\"_blank\" rel=\"noopener\" title=\"Official N-Fab Podium Bed Access installation guide (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial N-Fab Podium Bed Access installation guide (PDF)\u003c\/a\u003e, the manufacturer's step-by-step installation instructions for this part number.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e N-Fab covers the structure for life against failures in materials and workmanship, including the welds, the brackets and the stainless tube itself. Both terms belong to the original purchaser and apply on the vehicle the bars were first installed on. The textured black powder coat carries a 5-year finish warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This part ships by ground carrier as an oversize parcel, in a long carton rather than on a pallet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e A long carton takes knocks in transit, so look it over while the driver is there and note any crushed ends or punctures on the delivery record. Unpack it the same day and check the parts list: a bent bracket or a short hardware bag reported in the first days is a quick replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. N-Fab charges a 20% restocking fee on any product returned without a defect, and an N-Fab representative has to confirm a defect in fit, form or function before a return is authorized, so please contact us before shipping a part back. An item sent back without that authorization is refused and returned at the buyer's expense. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout N-Fab\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eN-Fab designs and fabricates tubular accessories for trucks and SUVs: nerf steps, running boards, rock rails and sliders, pre-runner bumpers and light mounts, most of them cut and bracketed for one specific vehicle. Every N-Fab product is warranted for life against defects in its materials and workmanship, and powder-coated finishes carry a 5-year limited finish warranty while polished stainless finishes are covered for life, both extended to the original purchaser on the vehicle the part was first installed on.\u003c\/p\u003e\n\u003cp\u003ePodium Bed Access takes the stainless construction of the Podium Cab Length and extends it wheel to wheel, adding a third step at the bedside for reaching into the bed. The mild-steel Nerf Step Wheel to Wheel offers a similar layout in powder-coated steel, while the Nerf Step RS, EpYx and aluminum Predator Pro are cab-door steps.\u003c\/p\u003e\n\u003cp\u003eMost of the N-Fab range is formed and welded tube: mild steel across the Nerf Step, EpYx, Roan and RKR lines, stainless steel in the Podium series, and extruded aluminum in Predator Pro and the Growler steps. Steel and aluminum parts are finished in gloss or textured black powder coat, and many bars are welded as one piece so there are fewer joints along the length to work loose.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"N-Fab","offers":[{"title":"Default Title","offer_id":67575415865588,"sku":"NFBHPT0792QC-6-TX","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/n-fab-podium-bed-access-textured-black-08816188_89c41e2e-74ad-4f46-8076-eb8885dd8e9b.jpg?v=1790688738","url":"https:\/\/prestigetruck.com\/products\/n-fab-podium-bed-access-nerf-step-bars-for-2007-2021-toyota-tundra-double-cab-6-ft-7-in-bed-hpt0792qc-6","provider":"Prestige Truck","version":"1.0","type":"link"}