{"product_id":"n-fab-roan-running-boards-for-2022-2026-toyota-tundra-crewmax-nbt22cc","title":"N-Fab Roan Running Boards for 2022-2026 Toyota Tundra (CrewMax)","description":"\u003cp\u003eThe Roan is a cab-length steel running board: a tubular steel frame carrying a 5.5\" wide, stitch-welded 12-gauge step plate with removable raised-louver tread plates, on an adjustable rocker-panel bracket system. Fitted to the 2022-2026 Toyota Tundra CrewMax, the Roan gives a squared-off, heavy-duty side profile in textured black powder coat. This listing is N-Fab part number NBT22CC, finished in textured black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2x Roan running boards (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eRemovable louvered tread plates\u003c\/li\u003e\n\u003cli\u003eVehicle-specific rocker panel brackets\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e475 lb Weight Capacity\u003c\/strong\u003e\u003cbr\u003eN-Fab rates the Roan at a 475 lb weight capacity. The strength comes from a tubular steel frame under a plate-steel step rather than a single bent tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA 5.5\" Steel Plate Step\u003c\/strong\u003e\u003cbr\u003eThe step is 12-gauge steel plate, 5.5\" wide, stitch-welded to the frame. Stitch welding joins the plate in short runs, which adds strength while keeping heat distortion out of the flat surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRaised Louver Tread\u003c\/strong\u003e\u003cbr\u003eThe top of the step carries raised louvers that give a boot an edge to grip in wet or muddy conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemovable Tread Plates\u003c\/strong\u003e\u003cbr\u003eThe tread plates bolt on rather than being welded, so they can come off to be refinished or colored to suit your build.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Mounting System\u003c\/strong\u003e\u003cbr\u003eThe brackets allow the board to be positioned during install, so you can set it where it suits your vehicle and your stride before tightening everything down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBolt-On, No Drilling\u003c\/strong\u003e\u003cbr\u003eThe vehicle-specific brackets line up with existing holes in the rocker panel, and every Roan application installs with the supplied hardware and no drilling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTextured Black Powder Coat\u003c\/strong\u003e\u003cbr\u003eThe steel is sealed in a textured black powder coat that resists scratches, chips, oil and chemicals. N-Fab warrants the finish for five years.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2022-2026 Toyota Tundra CrewMax. Match your cab before ordering: each bar is built for one body style.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e N-Fab Roan\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e Cab-length running boards\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Tubular steel frame, 12-gauge steel step plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStep Width:\u003c\/b\u003e 5.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStep Surface:\u003c\/b\u003e Raised louver, removable tread plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight Capacity:\u003c\/b\u003e 475 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Adjustable brackets at the rocker panel, no drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e A pair, driver and passenger side\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e NBT22CC-TX\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Textured Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Lifetime structural + 5-year powder-coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bolt-on, no drilling  ·  \u003cb\u003eTools:\u003c\/b\u003e Hand tools (socket set, ratchet and a torque wrench)  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e DIY-friendly; a helper makes lifting the boards easier\u003c\/p\u003e\u003cp\u003eThe vehicle-specific brackets bolt to existing holes in the rocker panel, then the boards are set on the brackets and positioned before the hardware is brought up to torque. Take the time to get both sides level and even before the final tightening, and check the bolts again after the first few hundred miles. The installation guide for this application uses the factory mounting points and does not call for drilling. The guide specifies fastener torque of 18-20 ft-lb.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/n-fab-nbt22cc-tx-installation-instructions.pdf?v=1790370282\" target=\"_blank\" rel=\"noopener\" title=\"Official N-Fab Roan installation guide (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial N-Fab Roan installation guide (PDF)\u003c\/a\u003e, the manufacturer's step-by-step installation instructions for this part number.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e N-Fab warrants the Roan running boards for life against defects in materials and workmanship, covering the frame, the step plates, the brackets and the welds, and warrants the powder-coat finish for five years. Both terms belong to the original purchaser, on the vehicle the product was first installed on, and they do not transfer if the vehicle is sold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This part ships by ground carrier as an oversize parcel, in a long carton rather than on a pallet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e A long carton takes knocks in transit, so look it over while the driver is there and note any crushed ends or punctures on the delivery record. Unpack it the same day and check the parts list: a bent bracket or a short hardware bag reported in the first days is a quick replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. N-Fab charges a 20% restocking fee on any product returned without a defect, and an N-Fab representative has to confirm a defect in fit, form or function before a return is authorized, so please contact us before shipping a part back. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout N-Fab\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eN-Fab designs and fabricates steps, running boards, rock rails and pre-runner bumpers for trucks, SUVs and vans, along with sports bars, racks and lighting mounts. Every N-Fab product carries a lifetime warranty against defects in materials and workmanship plus a five-year warranty on the powder-coat finish, both held by the original purchaser on the vehicle the part was first installed on.\u003c\/p\u003e\n\u003cp\u003eThe Roan is N-Fab's steel running board, and it sits between the tube steps and the aluminum boards in the lineup. Against the Podium, Nerf Step and EpYx hoop steps it trades a round tube for a flat plate step; against the aluminum Growler Fleet it trades a lighter board for a steel frame with a published 475 lb capacity.\u003c\/p\u003e\n\u003cp\u003eMost N-Fab parts start as steel tube that is bent, fully welded into a single assembly and finished in a multi-stage powder coat. Brackets and hardware are specific to each vehicle, so a part is engineered around one body's mounting points rather than adapted from a generic bracket.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"N-Fab","offers":[{"title":"Default Title","offer_id":67575417602292,"sku":"NFBNBT22CC-TX","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/n-fab-roan-textured-black-2eb99f80.jpg?v=1790688630","url":"https:\/\/prestigetruck.com\/products\/n-fab-roan-running-boards-for-2022-2026-toyota-tundra-crewmax-nbt22cc","provider":"Prestige Truck","version":"1.0","type":"link"}