{"product_id":"retrax-eq-tonneau-cover-2025-2026-ford-maverick-4-ft-4-in-bed-eq0337-1","title":"Retrax EQ Electric Retractable Tonneau Cover with T-Slot Rails for 2025-2026 Ford Maverick (4'4\" Bed)","description":"\u003cp\u003eThe Retrax EQ is an electric retractable tonneau cover for the 4'4\" bed on the 2025-2026 Ford Maverick. It runs from a key fob, the app or a keypad, and a dual helical cable drive in the rail channel moves the aluminum cover quietly. Its T-slot Trax Rails take most T-slot racks and gear mounts, sold separately. A manual disconnect knob under the cover frees it from the drive with a quarter turn, and it carries Retrax's 5-year limited warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Passenger side cover rail\u003c\/li\u003e\n\u003cli\u003e1 x Driver side cover rail\u003c\/li\u003e\n\u003cli\u003e1 x Cover rolled into canister\u003c\/li\u003e\n\u003cli\u003e2 x Drain tubes\u003c\/li\u003e\n\u003cli\u003e1 x Main wiring harness (with jumper wire)\u003c\/li\u003e\n\u003cli\u003e10 x Zip ties\u003c\/li\u003e\n\u003cli\u003e1 x Clamp kit (4 clamp assemblies)\u003c\/li\u003e\n\u003cli\u003e6 x Canister mounting bolts\u003c\/li\u003e\n\u003cli\u003e2 x Lock nuts\u003c\/li\u003e\n\u003cli\u003e1 x Allen wrench - 6mm\u003c\/li\u003e\n\u003cli\u003e1 x T25 Torx bit\u003c\/li\u003e\n\u003cli\u003e1 x Cabin module\u003c\/li\u003e\n\u003cli\u003e1 x T-slot seal\u003c\/li\u003e\n\u003cli\u003e1 x T-harness (not pictured)\u003c\/li\u003e\n\u003cli\u003e1 x Driver side canister water shield\u003c\/li\u003e\n\u003cli\u003e1 x Passenger side canister water shield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFob, app or keypad\u003c\/strong\u003e\u003cbr\u003eRun the cover from your truck's own key fob (press lock three times to close, unlock three times to open), the Retrax phone app over Bluetooth on iOS or Android, or an optional cab-mounted 5-button keypad.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuiet cable drive\u003c\/strong\u003e\u003cbr\u003eA dual helical cable drive working in glide tracks built into the rail channel moves the heavy-duty aluminum cover smoothly and quietly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShort canister, more bed\u003c\/strong\u003e\u003cbr\u003eRetrax says the EQ's short canister leaves more of the bed free for cargo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRack-ready Trax Rails\u003c\/strong\u003e\u003cbr\u003eThe aluminum side rails are T-slot Trax Rails that Retrax says accept most T-slot racks, gear and mounts from major makers such as Yakima, Thule and Rhino-Rack (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRail-mounted LED light\u003c\/strong\u003e\u003cbr\u003eAn LED light built into the driver-side rail lights the whole bed automatically whenever the cover opens or closes; a passenger-side light is optional.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnti-pinch safety\u003c\/strong\u003e\u003cbr\u003eAnti-pinch protection adds safety while the cover moves, and a manual disconnect knob under the cover lets you free it from the drive with a quarter turn and move it by hand.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-eq0337-1 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-eq0337-1\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-eq0337-1\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-eq0337-1 .pt-fit__tabs{display:none}#fit-eq0337-1 .pt-fit__p{display:block!important}#fit-eq0337-1 .pt-fitw{overflow:visible!important}#fit-eq0337-1 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eFord\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2025-2026\u003c\/td\u003e\n\u003ctd\u003eMaverick\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e4'4\"\u003c\/td\u003e\n\u003ctd class=\"e\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your bed:\u003c\/strong\u003e measure along the bed rail from the bulkhead to the inside of the closed tailgate. This bed is listed as 4'4\". We do not have a sourced inch figure for it, so go by the bed name on your build sheet or send us your VIN.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e the 2022-2024 Ford Maverick (EQ0337).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Retrax\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e EQ0337-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover Type:\u003c\/b\u003e Electric retractable\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRails:\u003c\/b\u003e T-slot Trax Rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e Heavy-duty aluminum rolling cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e UV-resistant matte black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLoad Capacity:\u003c\/b\u003e 500 lb, evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrive:\u003c\/b\u003e Dual helical cable drive with glide tracks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eControls:\u003c\/b\u003e OE key fob, Retrax phone app (Bluetooth), optional cab keypad\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLight:\u003c\/b\u003e LED in the driver-side rail; passenger side optional\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety:\u003c\/b\u003e Anti-pinch, manual disconnect\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e Truck battery (30A fused harness) plus cabin module\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Clamp-on, vehicle-specific hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Length:\u003c\/b\u003e 4'4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 840563112082\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eWhat's involved:\u003c\/b\u003e Rails clamp in with vehicle-specific hardware, a harness runs to the battery and a module mounts under the dash · \u003cb\u003eDifficulty:\u003c\/b\u003e Includes battery wiring, an under-dash cabin module and app setup, and two people lift the cover onto the bed · \u003cb\u003eTools:\u003c\/b\u003e #2 Phillips screwdriver; 9\/16\" wrench or socket; 3\/8\" wrench or socket with 1\/4\" drive; 1\/4\" drive ratchet; Drill and\/or impact driver; Scissors or utility knife; Tape measure; Deep well socket set and ratchet; Bit extension for drill\/impact driver; Step drill bit or 11\/16\" drill bit (optional)\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow Retrax's install sheet (below) for your truck's exact steps, part letters and torque settings.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eAssemble the cover.\u003c\/b\u003e Remove the shipping screws and brackets from both sides and keep the brackets. Pull the tail panel 4-6\" out of the canister and guide the drive carriage into each side rail's channel, making sure the seal at the front of each rail doesn't curl under. Fasten each rail to the cover with three canister bolts (T25 Torx bit), fitting the rearmost bolt first with its lock nut and canister water shield, to the torque the sheet shows. Route the driver-side LED harness behind the cover and plug it into the cover module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRun the power harness.\u003c\/b\u003e Route the main harness on the same side as the battery: in through a bed hole, down between the bed and cab and along the frame rails, kept high and away from moving parts and the exhaust. At the battery, connect the harness negative to ground and the positive jumper to the positive terminal, and zip-tie the harness neatly. Then pull the 30A fuse and disconnect the negative battery cable until the cabin module is installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSet it on the bed.\u003c\/b\u003e Remove all the protective film. With two people, lift the cover onto the bed with the canister at the bulkhead and the front seal lying flat, trimmed so it doesn't pass the bed rail caps. Set both rails 1\/8\" (3.2mm) from the tailgate, using the shipping brackets as spacers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp and square the rails.\u003c\/b\u003e Fit the clamps between the adjustment screws with each top jaw tucked firmly into the top inside corner of the bed rail sheet metal. Tighten with a 9\/16\" wrench while pushing the rail down, but not so close to the tailgate that it stops the tailgate opening and closing. Measure across the rails near the cab and above each clamp; they must match within 1\/16\". To adjust, turn the white adjustment screws with the 6mm Allen wrench (one turn = 1\/16\"). Then set the stand-off bolts for about a 2-degree upward tilt on each rail. Tighten the clamp bolts to 6.7 ft-lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnect, drain and seal.\u003c\/b\u003e Plug the main harness into the cover module, zip-tie it to the cover and take up the slack under the truck. Click a drain tube into each side (turn it clockwise until it clicks twice) and route the tubes out of the bed. They usually exit through a hole drilled in the factory bed plug or another suitable hole; check for lines before drilling. Cut the T-slot seal into two pieces to rail length and press one into the T-slot on each rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCabin module and app setup.\u003c\/b\u003e Install the cabin module and T-harness under the dash using your truck's own wiring instructions. Reconnect the negative battery cable and the 30A fuse. In the RealTruck EQ Installer app, configure and flash the modules and pair the cabin module. Then calibrate: with the cover disconnected from the carriages, press lock 3 times on the OE key fob, wait for the carriages to stop at the tailgate end, then press unlock 3 times.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/retrax-eq-tonneau-cover-standard-install-guide.pdf?v=1788628514\" target=\"_blank\" rel=\"noopener\"\u003eRetrax EQ Tonneau Cover Standard Installation Sheet (PDF)\u003c\/a\u003e, Retrax's own installation guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty term:\u003c\/strong\u003e 5-year limited\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Retrax backs the Retrax EQ with a limited warranty for five (5) years against defects in materials or workmanship, from the original date of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA defective cover or hardware component is repaired or replaced, at Retrax's option; Retrax may substitute a newer model with a similar form and function.\u003c\/li\u003e\n\u003cli\u003eIt covers the original purchaser only and is not transferable. Warranty registration must be on file and\/or proof of original purchase (a detailed, dated receipt) for the warranty to be effective; contact us for claims and registration help.\u003c\/li\u003e\n\u003cli\u003eTo keep it valid: clean with mild automotive soap and water only, no strong chemicals; never lubricate the rails or sealed ball bearings; keep cargo secured at all points while driving; check every clamp and retention part for tightness after the first week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).\u003c\/li\u003e\n\u003cli\u003eClaims: contact us for claims and registration help. Retrax issues a Return Material Authorization (RMA) number before anything is returned. Retrax may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, product or part number, a description of the issue, the original receipt and photos.\u003c\/li\u003e\n\u003cli\u003eNot covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. Retrax's general warranty page also lists normal wear (including fading), water intrusion and add-on accessories as not covered, and Retrax does not accept returns of non-defective products once installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eThis cover is an oversized item, so it ships by freight or as an oversized parcel.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e This cover ships in a large, heavy box. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout Retrax\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 26px\/1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eRETRAX\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eRetrax makes retractable tonneau covers. Retrax's install sheets list Retrax in Grand Forks, North Dakota.\u003c\/p\u003e\n\u003cp\u003eThe Retrax EQ is Retrax's smart electric cover, run from your truck's key fob, a phone app or an optional keypad, with T-slot Trax Rails. The range splits into manual covers (RetraxONE MX and XR, RetraxPRO MX and XR, Retrax IX and the RetraxPRO FRC-4000 EZ-OFF) and electric covers (PowertraxPRO MX and XR, PowertraxONE XR and the Retrax EQ). XR models add T-slot rails for racks; MX models have standard rails.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized Retrax dealer.\u003c\/strong\u003e Prestige Truck is an authorized Retrax dealer, so what we sell is new and genuine Retrax. In Retrax's words, the warranty \"is to the initial consumer purchasing the truck bed cover and it is not transferable to a subsequent end user. Proof of purchase may be required to enforce these warranty rights.\" Your Prestige Truck order receipt is that proof.\u003c\/p\u003e\u003c\/div\u003e","brand":"Retrax","offers":[{"title":"Default Title","offer_id":67811517071604,"sku":"RTXEQ0337-1","price":2799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/retrax-eq-tonneau-cover-r03_625e4256-30aa-4a03-8c74-de83b82bd0d3.jpg?v=1792149471","url":"https:\/\/prestigetruck.com\/products\/retrax-eq-tonneau-cover-2025-2026-ford-maverick-4-ft-4-in-bed-eq0337-1","provider":"Prestige Truck","version":"1.0","type":"link"}