{"product_id":"roll-n-lock-cargo-manager-2024-2025-ford-ranger-5-ft-0-in-bed-cm124","title":"Roll-N-Lock Cargo Manager Truck Bed Divider for 2024-2025 Ford Ranger (5' Bed)","description":"\u003cp\u003eThe Roll-N-Lock Cargo Manager mounts into the side rails that a Roll-N-Lock retractable tonneau cover installs in your bed, which makes it an accessory to one of those covers rather than a standalone product: with no Roll-N-Lock cover already on the truck there is nothing for the divider to mount to.\u003c\/p\u003e\n\u003cp\u003eWhat it does once it is in there is simple. A full-width grid panel spans the bed on two sliding arms, and a release lever at each arm lets you run it up and down the rails and drop it into a stop every 3\" along the way. Set it hard against whatever you are carrying and the load stays where you put it instead of ending up wherever the last corner threw it. It sits low enough that the cover rolls shut over the top, so your gear is held against the bulkhead and under a locked deck at the same time.\u003c\/p\u003e\n\u003cp\u003eThree inches between stops is close enough that a case sits against the panel rather than sliding about in whatever gap a fixed anchor point would have left you. Lift the levers, walk the divider down to where the load ends, let it drop and it is locked. That fine spacing counts for more on a mid-size box than it does on a long bed, because there is less floor to play with and a few inches of slack is a much larger share of what you have. Part number CM124, built for the 5' bed on the 2024-2025 Ford Ranger, and sized to the Roll-N-Lock cover for that same application. If you have not fitted a Roll-N-Lock cover to this truck yet, the ones that take this divider are 124M-XT, BT124A and LG124M.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCargo Manager divider panel with sliding end arms\u003c\/li\u003e\n\u003cli\u003eCaptive mounting hardware for the Roll-N-Lock side rails\u003c\/li\u003e\n\u003cli\u003eInstallation sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"embed-container\" style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;max-width:100%;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/v39TKpkOeXs\" title=\"Roll-N-Lock Cargo Manager Truck Bed Divider for 2024-2025 Ford Ranger (5' Bed)\" loading=\"lazy\" frameborder=\"0\" allowfullscreen style=\"position:absolute;top:0;left:0;width:100%;height:100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSlides the Length of the Bed\u003c\/strong\u003e\u003cbr\u003eThe divider runs the whole length of the side rails, from hard against the bulkhead to up at the tailgate. One part covers a bed full of firewood and a single toolbox, because where it sits is your decision rather than the manufacturer's.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLocks Every 3 Inches\u003c\/strong\u003e\u003cbr\u003eA lever at each arm releases the divider and it drops into a stop in the rail every 3 inches along its travel. That is close enough that a case or a bag sits against the panel instead of rattling in whatever gap the nearest fixed position happened to leave.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks With the Cover Closed\u003c\/strong\u003e\u003cbr\u003eThe divider sits low enough that the Roll-N-Lock deck rolls over the top of it. Set the load, slide the divider against it, close the cover and lock it. The load is held against the bulkhead and under a hard locked deck at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull-Width Grid Panel\u003c\/strong\u003e\u003cbr\u003eThe panel is an open grid the full width of the bed, so a bungee, a strap or a hook has something to grab anywhere across it rather than at two fixed anchor points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFolds Flat When You Want the Whole Box\u003c\/strong\u003e\u003cbr\u003eDrop the divider and it lies flat along the bed floor rather than coming out of the truck and living in the garage. The day you need the full length of the bed, it takes seconds and nothing goes missing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClamps Into the Rails You Already Have\u003c\/strong\u003e\u003cbr\u003eIt mounts into the side rails your Roll-N-Lock cover already put in the bed, using its own captive hardware. Nothing is drilled into the truck and nothing is added to the bed rails.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 5' bed on the 2024-2025 Ford Ranger. \u003cstrong\u003eRequires a Roll-N-Lock retractable cover\u003c\/strong\u003e already fitted to the truck. This is not a standalone product.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Roll-N-Lock Cargo Manager\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Sliding truck bed divider\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperation:\u003c\/b\u003e Manual release lever at each arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePositions:\u003c\/b\u003e Locks into the rail every 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse with the cover:\u003c\/b\u003e Stays in place with the cover closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStows:\u003c\/b\u003e Folds flat on the bed floor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRequires:\u003c\/b\u003e A Roll-N-Lock retractable tonneau cover, not a standalone product\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot included:\u003c\/b\u003e Bungee cords, straps and clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 3-year limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of origin:\u003c\/b\u003e Assembled in Florida from US and global materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e 2024-2025 Ford Ranger\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed length:\u003c\/b\u003e 5'\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e CM124\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 194839067249\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping weight (packaged):\u003c\/b\u003e 22 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping carton:\u003c\/b\u003e 66\" × 18\" × 3\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Clamps into your Roll-N-Lock cover's side rails  ·  \u003cb\u003eRequires:\u003c\/b\u003e A Roll-N-Lock retractable cover already fitted  ·  \u003cb\u003eHardware:\u003c\/b\u003e Captive on the divider\u003c\/p\u003e\n\u003cp\u003eThe two sliding arms carry their own captive hardware, and that hardware seats into the side rail channels the Roll-N-Lock cover already put down both sides of the bed. Nothing is drilled into the truck and nothing new is added to the bed rails. With the arms in the channels the panel lifts up into position, and the release lever at each arm drops it into a stop; slide it along the rail to move it and it locks again every 3\".\u003c\/p\u003e\n\u003cp\u003eRoll-N-Lock supplies an installation sheet with the divider and that sheet, rather than a video, is the one to work from. Roll-N-Lock does not publish an installation time for the Cargo Manager, so we are not going to quote one.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cp\u003eEverything Roll-N-Lock publishes for this divider, in one place.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/roll-n-lock-cargo-manager-installation-sheet.pdf?v=1789818122\" target=\"_blank\" rel=\"noopener\" title=\"Roll-N-Lock's own installation sheet for the Cargo Manager, covering the parts list and the sequence for seating the divider into the cover's side rails.\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eRoll-N-Lock Cargo Manager Installation Sheet (PDF)\u003c\/a\u003e, the manufacturer's own installation sheet for this divider.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Roll-N-Lock covers the Cargo Manager with a three (3) year limited warranty to the original purchaser against defects in material and workmanship. The warranty runs to the original purchaser only and is not transferable, and it ends if the product is moved to another vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This ships free to the lower 48 states. It travels as a parcel shipment rather than a freight shipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e It arrives in a long, flat carton that takes the knocks before anything inside does. Check the packaging when it arrives, and if you see damage, note it on the delivery paperwork and contact us straight away so we can put it right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance.\u003c\/strong\u003e Country of origin: USA. Roll-N-Lock assembles in Pompano Beach, Florida from US and global materials. California residents: Proposition 65 warning for cancer and reproductive harm.\u003c\/p\u003e\n\u003ch3\u003eAbout Roll-N-Lock\u003c\/h3\u003e\n\u003cdiv class=\"pt-about\" style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 170px;max-width:170px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/roll-n-lock-logo.png?v=1789907461\" alt=\"Roll-N-Lock logo\" width=\"170\" height=\"22\" loading=\"lazy\" decoding=\"async\" style=\"display:block;width:100%;height:auto;\"\u003e\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px;min-width:260px;\"\u003e\n    \u003cp\u003eRoll-N-Lock builds retractable truck bed covers and cargo management hardware at its plant in Pompano Beach, Florida, and is part of the RealTruck group of truck accessory brands. Every cover is assembled in Florida from US and global materials and is backed by a three-year limited warranty to the original purchaser, or five years on the electric E-Series.\u003c\/p\u003e\n    \u003cp\u003eThe Cargo Manager is the cargo-management half of the line rather than a cover. It drops into the side rails a Roll-N-Lock retractable cover already puts in the bed and slides the length of them, so the same rails that carry the cover also carry a divider that holds a load against the bulkhead. Roll-N-Lock builds one for most of the trucks its M-Series, A-Series and E-Series covers fit.\u003c\/p\u003e\n    \u003cp\u003eEvery Roll-N-Lock cover shares the same mechanism: a torsion-spring or motor-driven deck, a patented theft-resistant hinge between the slats, and a tailgate extrusion that stops the tailgate opening while the cover is closed. The deck retracts into a canister at the bulkhead and locks there rather than stowing loose in the bed.\u003c\/p\u003e\n    \u003cp\u003ePrestige Truck is an authorized Roll-N-Lock dealer. Every cover we ship is new, in the factory carton, and covered by Roll-N-Lock's warranty direct from the manufacturer.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Roll-N-Lock","offers":[{"title":"Default Title","offer_id":49433909526772,"sku":"ROLCM124","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/roll-n-lock-cargo-manager-open-bed-rear-quarter.jpg?v=1789826841","url":"https:\/\/prestigetruck.com\/products\/roll-n-lock-cargo-manager-2024-2025-ford-ranger-5-ft-0-in-bed-cm124","provider":"Prestige Truck","version":"1.0","type":"link"}