{"product_id":"teraflex-3-5-in-alpine-ct3-long-arm-suspension-system-no-shocks-2-door-2018-2026-jeep-wrangler-1523100","title":"TeraFlex 3.5\" Alpine CT3 Long Arm Suspension System, No Shocks (2-Door) for 2018-2026 Jeep Wrangler","description":"\u003cp\u003eThe 3.5\" Alpine CT3 Long Arm Suspension System, No Shocks (2-Door) is part of the TeraFlex Alpine long arm platform, which moves the control arm mounts for longer, flatter arms and a smoother ride over rough ground. Fully adjustable Alpine arms let caster and pinion angle be dialed in for the lift height. Part number 1523100 fits the 2018-2026 Jeep Wrangler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShocks, wheels, tires and the alignment after installation are not included, and individual arms and arm kits require the Alpine long arm bracket kit unless the title includes brackets.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eLonger arms, smoother travel\u003c\/strong\u003e\u003cbr\u003eLong arms change angle less through their travel, which smooths the ride and lets the suspension articulate more freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFully adjustable Alpine arms\u003c\/strong\u003e\u003cbr\u003eAlpine arms adjust in length to set caster, pinion angle and axle position precisely for the lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFactory-style or IR bushings\u003c\/strong\u003e\u003cbr\u003eChoose factory-style bushings for quiet, maintenance-free service, or TeraFlex IR bushings that rotate freely to reduce bind.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStreamlined long arm brackets\u003c\/strong\u003e\u003cbr\u003eTeraFlex long arm brackets combine the upper and lower frame mounts in one bracket for strength and a clean look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComplete CT and RT systems\u003c\/strong\u003e\u003cbr\u003eAlpine CT and RT systems pair the long arms with springs, track bars, bump stops and brackets matched for their height.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits: 2018-2026 Jeep Wrangler (JL; 2-door only). Check your trim and factory equipment against the notes before ordering.\u003cbr\u003e\u003cb\u003eQualifier:\u003c\/b\u003e JL; 2-door only\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e TeraFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Alpine\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift height:\u003c\/b\u003e 3.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoors:\u003c\/b\u003e 2-door\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShocks included:\u003c\/b\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of origin:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e 1523100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eType: Long arm conversion and lift systems  ·  Install: Major job; cutting, grinding and drilling  ·  Afterward: Alignment required\u003c\/p\u003e\u003cp\u003eRead every TeraFlex sheet linked for this part or system and plan the job before starting; long arm brackets require cutting and drilling. Professional installation is strongly recommended, and an alignment is required afterward.\u003c\/p\u003e\u003cp\u003eCovers the JL jounce bumper kit: the factory bump stops come out of the front jounce tubes and rear frame mounts, and TeraFlex extended bump stops twist in, with silicone spray to help if needed. On Rubicon models the locker actuator plug must be disconnected and reconnected.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Basic hand tools, Jack or jack stands, Factory service manual\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 56 ft-lb, Shock bolts; 69 ft-lb, Sway bar link bolts\u003c\/p\u003e\u003cp\u003eCovers the front JL\/JT adjustable track bar, best installed with the Jeep on level ground; a helper turning the steering wheel or a ratchet strap lines up the holes. Final torque is set on the ground, and the drag link may need adjusting to center the steering wheel.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Metric sockets and open-end wrenches, Torque wrench, General mechanics tools, Factory service manual, 12-point 10mm socket, 1-3\/8\" wrench\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 52 ft-lb + 115° (ref. 205 ft-lb), 21mm track bar bolt, first end; 52 ft-lb + 155° (ref. 200 ft-lb), 21mm track bar bolt, axle end; 60 ft-lb, 12-point 10mm clamp screws\u003c\/p\u003e\u003cp\u003eA printed template used to mark the rear body mount trim for the Alpine long arm brackets; print it at full scale.\u003c\/p\u003e\u003cp\u003eCovers the JL 3.5\" spring lift: new front and rear springs and bump stop spacers go in, the brake line brackets on the lower control arms and the rear parking brake cable bracket are discarded, and the parking brake eyelets are held with locking pliers while the rear axle is lowered. TeraFlex states that some form of caster correction is required for the base spring lift, that a 37\" tire on a Sport or Sahara may need additional bump stop spacers, and that a rear track bar bracket is recommended to keep the rear driveshaft from contacting the gas tank. Control arm bolts are torqued at ride height unless the arms have Alpine IR bushings. This version includes the front track bar bracket, which requires drilling two 1\/2\" holes.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Metric sockets and open-end wrenches, Torque wrench, General mechanics tools, Factory service manual, Drill with 1\/2\" bit, Locking pliers (2)\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 12 ft-lb, Front bump stop hardware; 25 ft-lb, Rear bump stop bracket bolts (8mm and 6mm hex); 66 ft-lb, Sway bar link nuts; 45 ft-lb, Rear sway bar link nuts; 103 ft-lb + 145°, Front lower control arm bolts; 37 ft-lb + 135°, Front upper control arm bolts (18mm); 74 ft-lb + 65°, Rear upper control arm bolts (21mm); 130 ft-lb, Lug nuts\u003c\/p\u003e\u003cp\u003eCovers the JL Alpine long arm and bracket installation, a major job. The factory front and rear control arm brackets are cut off the frame with a cutoff wheel or torch, the frame is ground smooth and painted, the new brackets bolt on with red thread locker (drilling 11\/16\" holes), and the rear body mounts are trimmed using a template. The exhaust, gas tank, crossmembers and driveshafts come out and go back in, and the control arm bolts are torqued at ride height unless the arms have IR bushings.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Metric sockets and open-end wrenches, Torque wrench, General mechanics tools, Factory service manual, Drill with 11\/16\" bit, Cut-off wheel, grinder or torch\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 111 ft-lb, 18mm rear bracket to frame bolts; 80 ft-lb, 16mm and 18mm front bracket to frame bolts; 130 ft-lb, 18mm bracket bolts, see sheet; 20 ft-lb, 13mm crossmember hardware; 200 ft-lb, 21mm control arm bolts; 140 ft-lb, 22mm bolts, see sheet; 130 ft-lb, Lug nuts\u003c\/p\u003e\u003cp\u003eTeraFlex's installation instructions for this part number are linked under Resources. Read them fully before starting.\u003c\/p\u003e\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:12px 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/RIIiEUxKz9k\" title=\"TeraFlex installation video\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1619-999308-jeep-jl-jounce-bumper-instructions.pdf?v=1790626748\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex JL jounce bumper instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL jounce bumper instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1635-999340-jeep-jl-jt-forged-front-track-bar-assembly-with-upgrade-joint-k.pdf?v=1790626856\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex front HD forged adjustable track bar instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex front HD forged adjustable track bar instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1649-999360-jeep-jl-alpine-long-arm-body-mount-modification-template.pdf?v=1790626923\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex JL long arm body mount template (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL long arm body mount template (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1807-999324-jeep-jl-3-5in-spring-lift-instructions.pdf?v=1790627212\" target=\"_blank\" rel=\"noopener\" title='TeraFlex JL 3.5\" spring lift instructions (PDF)' style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL 3.5\" spring lift instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1808-999335-jeep-jl-alpine-long-arm-and-bracket-instructions.pdf?v=1790627219\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex JL Alpine long arm and bracket instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL Alpine long arm and bracket instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e TeraFlex backs its products with a limited warranty against defects in materials and workmanship for the original purchaser, on the vehicle the part was first installed on. Control arms, IR bushings, coil springs, bump stops, track bars, sway bars and skid plates carry a lifetime warranty, while Alpine control arm and track bar bushings other than IR are covered for 1 year. If a covered part fails, TeraFlex will repair or replace it or refund the purchase price at its discretion. The warranty does not cover improper installation, missed maintenance, modifications, normal wear, finish wear or racing and competition use, and paint and powder coat finishes are covered for 90 days against defects only. \u003cstrong\u003eShipping.\u003c\/strong\u003e The carrier and ship method are set by the size and weight of the cartons when the order is placed; larger kits and axles ship by freight. \u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Inspect the carton and every part as soon as the delivery arrives, note any shipping damage with the carrier, and contact us right away so we can make it right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout TeraFlex\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eTeraFlex is a Jeep company at heart, started and staffed by people who drive them. It designs, engineers and builds suspension systems, shocks, axles and performance parts, with the Wrangler and Gladiator at the center of the lineup.\u003c\/p\u003e\n\u003cp\u003eThe company traces its history to the 1950s, when it began as MEPCO (Military Equipment Parts Company), one of the first companies anywhere to supply Jeep parts and accessories. TeraFlex Manufacturing followed in 1996 to build heavy-duty suspension for the TJ Wrangler, and the brand credits itself with the first suspension system for that coil-spring platform, a low-range gearing option for the 231 transfer case and the CRD60 high-pinion axle.\u003c\/p\u003e\n\u003cp\u003eThe current catalog covers full lift systems, the Falcon shock line and a long list of Wrangler and Gladiator upgrades, and the company is now carrying the same engineering approach to other vehicles as well.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TeraFlex","offers":[{"title":"Default Title","offer_id":67602147279092,"sku":"1523100","price":4848.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-alpine-long-arm-suspension-teraflex-long-arm-lift-kit-with-frame-brackets-1.jpg?v=1790687177","url":"https:\/\/prestigetruck.com\/products\/teraflex-3-5-in-alpine-ct3-long-arm-suspension-system-no-shocks-2-door-2018-2026-jeep-wrangler-1523100","provider":"Prestige Truck","version":"1.0","type":"link"}