{"product_id":"teraflex-3-5-in-trail-select-performance-kit-with-falcon-3-3-shocks-2018-2026-jeep-wrangler-1543000","title":"TeraFlex 3.5\" Trail Select Performance Kit with Falcon 3.3 Shocks (4-Door) for 2018-2026 Jeep Wrangler","description":"\u003cp\u003eThe 3.5\" Trail Select Performance Kit with Falcon 3.3 Shocks (4-Door) is a complete TeraFlex Trail Select system, with springs, geometry parts and Falcon shocks chosen to work together. Geometry correction parts are included to keep steering and handling where they should be. Part number 1543000 fits the 2018-2026 Jeep Wrangler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Falcon 3.3 piggyback shocks\u003c\/li\u003e\n\u003cli\u003e3.5\" lift coil springs\u003c\/li\u003e\n\u003cli\u003eAlpine adjustable control arms, all eight\u003c\/li\u003e\n\u003cli\u003eForged adjustable track bar, front\u003c\/li\u003e\n\u003cli\u003eRelocation brackets for the rear track bar\u003c\/li\u003e\n\u003cli\u003eSwivel-stud quick disconnect sway bar links\u003c\/li\u003e\n\u003cli\u003eMicrocellular jounce bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWheels, tires, offset wheel adapters and the alignment after installation are not included.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eComplete system, shocks included\u003c\/strong\u003e\u003cbr\u003eEach Trail Select kit includes Falcon shocks along with the springs and supporting parts, matched for its lift height and tier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThree tiers for your use\u003c\/strong\u003e\u003cbr\u003eSport targets daily driving, Adventure balances comfort with trail control, and Performance is built for the most demanding use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeometry correction included\u003c\/strong\u003e\u003cbr\u003eControl arm, track bar and bracket parts included in each kit restore caster and suspension alignment at the new height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFalcon shocks tuned per tier\u003c\/strong\u003e\u003cbr\u003eFalcon 1.1, 2.1 and 3.3 shocks are valved for their tier, from smooth everyday damping to adjustable piggyback control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClear application limits\u003c\/strong\u003e\u003cbr\u003eTeraFlex does not offer these kits for diesel, 392 or 4xe models, and lists the wheel backspacing each kit needs.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits: 2018-2026 Jeep Wrangler (JL; 4-door only). For 4-door Wrangler Unlimited models only; not for 2-door models. Not for EcoDiesel, 4xe or 392 models (call TeraFlex about those applications). Check your trim and factory equipment against the notes before ordering.\u003cbr\u003e\u003cb\u003eQualifier:\u003c\/b\u003e JL; 4-door only\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e TeraFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Trail Select\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e Diesel, 392 and 4xe models\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShocks included:\u003c\/b\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLift height:\u003c\/b\u003e 3.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of origin:\u003c\/b\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e 2-door models; EcoDiesel, 4xe and 392 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e 1543000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eType: Complete lift system with Falcon shocks  ·  Install: Several linked sheets, some drilling  ·  Afterward: Alignment required\u003c\/p\u003e\u003cp\u003eRead every sheet linked for this system and plan the order before starting. Confirm your wheels meet the backspacing requirement. A certified mechanic is recommended, and an alignment and headlight aim check should follow the install.\u003c\/p\u003e\u003cp\u003eFalcon quick start for the JL 3.3 piggyback shocks: the front fender liner is trimmed with the provided template, the lower section of the rear fender liner comes out, and the reservoirs mount with the supplied hardware.\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 56 ft-lb, Shock bolts; 50 ft-lb, Reservoir mounting bolts; 30 in-lb, Roost guard bolts, with thread locker\u003c\/p\u003e\u003cp\u003eExplains Falcon Mode Adjust: with the shock fully extended, rotating the shaft 360° switches the internal bypass between Performance and Soft\/Cold tuning, and the change can be felt as it clicks over.\u003c\/p\u003e\u003cp\u003eCovers the JL jounce bumper kit: the factory bump stops come out of the front jounce tubes and rear frame mounts, and TeraFlex extended bump stops twist in, with silicone spray to help if needed. On Rubicon models the locker actuator plug must be disconnected and reconnected.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Basic hand tools, Jack or jack stands, Factory service manual\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 56 ft-lb, Shock bolts; 69 ft-lb, Sway bar link bolts\u003c\/p\u003e\u003cp\u003eCovers the JL rear track bar axle bracket. TeraFlex states it needs at least a 2\" bump stop spacer to keep the body from being damaged as the suspension cycles. Two 1\/2\" holes are drilled after marking the bracket position (a center punch and pilot hole are suggested). The lower track bar position is for 2.5\"-3\" lifts and the upper is for 4\" lifts; it can be installed with the Jeep on the ground.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Basic mechanics tool set, Factory service manual, Drill, 1\/2\" drill bits, Pilot drill bit, Center punch, Torque wrench\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 95 ft-lb, Supplied M12 bracket bolts (16mm and 18mm); 150 ft-lb, Supplied M14 track bar bolt (18mm and 21mm)\u003c\/p\u003e\u003cp\u003eCovers the Alpine short control arms on the JL. TeraFlex recommends doing the job with all four tires on the ground and never removing more than two arms at a time. On diesel models the exhaust blocks the passenger upper arm bolt, and the sheet describes lowering the exhaust or cutting that bolt. Arms are set to the lengths in the sheet and torqued at ride height unless they have IR bushings.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Metric sockets and open-end wrenches, Torque wrench, General mechanics tools, Factory service manual\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 103 ft-lb + 145°, Front lower arm bolts (24mm nut); 37 ft-lb + 135°, Front upper arm bolts (18mm); 74 ft-lb + 50°, Rear arm bolts (21mm), see sheet; 30 ft-lb, Adjuster clamp bolts (8mm); 59 ft-lb, Sway bar link bolts; 74 ft-lb, Lower shock bolts\u003c\/p\u003e\u003cp\u003eCovers the JL 3.5\" spring lift: new front and rear springs and bump stop spacers go in, the brake line brackets on the lower control arms and the rear parking brake cable bracket are discarded, and the parking brake eyelets are held with locking pliers while the rear axle is lowered. TeraFlex states that some form of caster correction is required for the base spring lift, that a 37\" tire on a Sport or Sahara may need additional bump stop spacers, and that a rear track bar bracket is recommended to keep the rear driveshaft from contacting the gas tank. Control arm bolts are torqued at ride height unless the arms have Alpine IR bushings. This version includes the front track bar bracket, which requires drilling two 1\/2\" holes.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Metric sockets and open-end wrenches, Torque wrench, General mechanics tools, Factory service manual, Drill with 1\/2\" bit, Locking pliers (2)\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 12 ft-lb, Front bump stop hardware; 25 ft-lb, Rear bump stop bracket bolts (8mm and 6mm hex); 66 ft-lb, Sway bar link nuts; 45 ft-lb, Rear sway bar link nuts; 103 ft-lb + 145°, Front lower control arm bolts; 37 ft-lb + 135°, Front upper control arm bolts (18mm); 74 ft-lb + 65°, Rear upper control arm bolts (21mm); 130 ft-lb, Lug nuts\u003c\/p\u003e\u003cp\u003eCovers the front HD forged adjustable track bar. If a TeraFlex front track bar bracket is already installed, leave it in place. Set the bar near the length needed to center the axle (the factory bar is 33-3\/4\"), reuse the OEM hardware, and do the final tightening with the vehicle on the ground and the suspension loaded. The clamp bolts are tightened alternately until both hold torque, which can take up to 10 passes, and the drag link may need adjusting if the steering wheel is off center.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Metric sockets and open-end wrenches, Torque wrench, General mechanics tools, 12-point 10mm socket, 1-3\/8\" wrench, Factory service manual\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 52 ft-lb + 115° (ref. 205 ft-lb), 21mm track bar bolt, first end; 52 ft-lb + 155° (ref. 200 ft-lb), 21mm track bar bolt, second end; 60 ft-lb, 12-point 10mm adjuster clamp bolts\u003c\/p\u003e\u003cp\u003eCovers the front sway bar quick disconnect kit: parking brackets bolt to the spring towers, parking studs go in, axle-side quick disconnect brackets mount with the stock sway bar bolts, and the new links install with grease on the stud for a tight fit. A spacer in the kit is used on 2024 and newer JL and JT only; 2018-2023 JL and 2020-2023 JT do not need it.\u003cbr\u003e\u003cb\u003eTools named in the guide:\u003c\/b\u003e Metric sockets and open-end wrenches, Torque wrench, General mechanics tools, 6mm hex key, Factory service manual\u003cbr\u003e\u003cb\u003eTorque:\u003c\/b\u003e 20 ft-lb, 13mm parking bracket bolts; 50 ft-lb, Parking studs (15mm stud, 9\/16\" nut); 75 ft-lb, Axle quick disconnect bracket studs (17mm stud, 19mm nut); 59 ft-lb, Axle bracket to axle with the stock sway bar bolts; 69 ft-lb, 18mm link nut, holding the stud with a 6mm hex key; 5 ft-lb, Grease zerk\u003c\/p\u003e\u003cp\u003eTeraFlex's installation instructions for this part number are linked under Resources. Read them fully before starting.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1987-96-01-02-018-jeep-jl-piggyback-quick-start-guide-web.pdf?v=1790627680\" target=\"_blank\" rel=\"noopener\" title=\"Falcon JL 3.3 piggyback shock quick start guide (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eFalcon JL 3.3 piggyback shock quick start guide (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1988-96-01-02-022-mode-adjust-quick-start-guide-web.pdf?v=1790627685\" target=\"_blank\" rel=\"noopener\" title=\"Falcon Mode Adjust quick start guide (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eFalcon Mode Adjust quick start guide (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1989-999308-jeep-jl-jounce-bumper-instructions.pdf?v=1790627688\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex JL jounce bumper instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL jounce bumper instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1990-999311-jeep-jl-rear-track-bar-bracket-for-4in-lift-instructions.pdf?v=1790627692\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex JL rear track bar bracket instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL rear track bar bracket instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1991-999321-jeep-jl-alpine-short-control-arms-instructions.pdf?v=1790627698\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex JL Alpine short control arm instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL Alpine short control arm instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1992-999324-jeep-jl-3-5in-spring-lift-instructions.pdf?v=1790627709\" target=\"_blank\" rel=\"noopener\" title='TeraFlex JL 3.5\" spring lift instructions (PDF)' style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex JL 3.5\" spring lift instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1993-999340-jeep-jl-jt-forged-front-track-bar-assembly-with-upgrade-joint-k.pdf?v=1790627716\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex front HD forged adjustable track bar instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex front HD forged adjustable track bar instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-1994-999372-jeep-jl-jt-front-sway-bar-quick-disconnects-instructions.pdf?v=1790627721\" target=\"_blank\" rel=\"noopener\" title=\"TeraFlex front sway bar quick disconnect instructions (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTeraFlex front sway bar quick disconnect instructions (PDF)\u003c\/a\u003e, TeraFlex's step-by-step guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e TeraFlex backs its products with a limited warranty against defects in materials and workmanship for the original purchaser, on the vehicle the part was first installed on. Falcon shocks are covered for 1 year; coil springs, bump stops, control arms, track bars and sway bar links carry a lifetime warranty. If a covered part fails, TeraFlex will repair or replace it or refund the purchase price at its discretion. The warranty does not cover improper installation, missed maintenance, modifications, normal wear, finish wear or racing and competition use, and paint and powder coat finishes are covered for 90 days against defects only. \u003cstrong\u003eShipping.\u003c\/strong\u003e The carrier and ship method are set by the size and weight of the cartons when the order is placed; larger kits and axles ship by freight. \u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Inspect the carton and every part as soon as the delivery arrives, note any shipping damage with the carrier, and contact us right away so we can make it right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout TeraFlex\u003c\/h3\u003e\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eTeraFlex is a Jeep company at heart, started and staffed by people who drive them. It designs, engineers and builds suspension systems, shocks, axles and performance parts, with the Wrangler and Gladiator at the center of the lineup.\u003c\/p\u003e\n\u003cp\u003eThe company traces its history to the 1950s, when it began as MEPCO (Military Equipment Parts Company), one of the first companies anywhere to supply Jeep parts and accessories. TeraFlex Manufacturing followed in 1996 to build heavy-duty suspension for the TJ Wrangler, and the brand credits itself with the first suspension system for that coil-spring platform, a low-range gearing option for the 231 transfer case and the CRD60 high-pinion axle.\u003c\/p\u003e\n\u003cp\u003eThe current catalog covers full lift systems, the Falcon shock line and a long list of Wrangler and Gladiator upgrades, and the company is now carrying the same engineering approach to other vehicles as well.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TeraFlex","offers":[{"title":"Default Title","offer_id":67602154062068,"sku":"1543000","price":4499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-trail-select-suspension-system-teraflex-long-arm-style-lift-kit-with-coils-1.png?v=1790687177","url":"https:\/\/prestigetruck.com\/products\/teraflex-3-5-in-trail-select-performance-kit-with-falcon-3-3-shocks-2018-2026-jeep-wrangler-1543000","provider":"Prestige Truck","version":"1.0","type":"link"}