{"product_id":"teraflex-falcon-hd-rear-shock-skid-plate-kit-2007-2018-jeep-wrangler-jk-36-07-01-300","title":"TeraFlex Falcon HD Rear Shock Skid Plate Kit for 2007-2018 Jeep Wrangler JK","description":"\u003cp\u003eThe HD version of TeraFlex's Falcon rear shock skid plates suits JK owners who plan to weld their shock armor in place. It covers each rear Falcon shock on a 2007-2018 Jeep Wrangler JK or JK Unlimited with 1\/4\" cold rolled steel plate and comes in a raw finish, so it can be welded in place. TeraFlex says welding is not required but highly recommended for extreme use. Plan on about two hours of labor; the shocks are not included.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-duty shock armor\u003c\/strong\u003e\u003cbr\u003eTeraFlex's HD answer for rear shock protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1\/4\" cold rolled steel\u003c\/strong\u003e\u003cbr\u003eTeraFlex's stated plate material and thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaw, weld-ready finish\u003c\/strong\u003e\u003cbr\u003eLeft bare for owners who want to weld it on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding optional\u003c\/strong\u003e\u003cbr\u003eNot required; TeraFlex highly recommends it for extreme use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFalcon Series 3 or 2\u003c\/strong\u003e\u003cbr\u003eFor Series 3 Piggyback, also Series 2 Monotube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout two hours\u003c\/strong\u003e\u003cbr\u003eTeraFlex's labor estimate for the job.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#fit-36-07-01-300 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#fit-36-07-01-300\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#fit-36-07-01-300\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#fit-36-07-01-300 .pt-fit__tabs{display:none}#fit-36-07-01-300 .pt-fit__p{display:block!important}#fit-36-07-01-300 .pt-fitw{overflow:visible!important}#fit-36-07-01-300 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eJeep\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e\u003c\/td\u003e\n\u003ctd class=\"n\"\u003eJK; For Falcon rear shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your Jeep:\u003c\/strong\u003e 2007-2018 Wrangler JK or JK Unlimited with TeraFlex Falcon Series 3 Piggyback or Series 2 Monotube rear shocks.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e Buyers who want a bolt-on, painted part: see the Falcon Bolt-On Rear Shock Skid Plate Kit (36-07-01-200).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e TeraFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e 36-07-01-300\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Type:\u003c\/b\u003e Rear shock skid plate kit (HD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e 1\/4\" cold rolled steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Raw (unpainted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWelding:\u003c\/b\u003e Not required; recommended for extreme use\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShock Compatibility:\u003c\/b\u003e TeraFlex JK Falcon Series 3 Piggyback; Series 2 Monotube\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 843885041719\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eTime:\u003c\/b\u003e 2 hours · \u003cb\u003eWhat's involved:\u003c\/b\u003e Remove each rear lower control arm in turn, cut off the factory shock and sway bar brackets and bolt on the skid plate at your chosen level, drilling 3\/8\" holes (welding optional). Refit the arms, sway bar links and shocks. · \u003cb\u003eTools:\u003c\/b\u003e 9\/16\" and 3\/4\" (or 19 mm) wrench or socket; Ratchet; 6 mm Allen wrench; Large flat head screwdriver or pry bar; 3\/8\" drill bit; Rest on TeraFlex's tool list\u003c\/p\u003e\n\u003cp\u003eHere's the short version. Follow TeraFlex's install sheet (below) for your Jeep's exact steps and torque values.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePick the mounting level: Level 1 keeps the lower shock mount height, Level 2 raises it 13\/16\" and Level 3 1-5\/8\" (Levels 2-3 change axle travel, so the shocks can bottom before the bump stops or the springs can unseat at droop); Falcon shocks built after August 2020 need their stud bushing replaced with the provided 61-01-01-001 bushing, lubricated and pressed in.\u003c\/li\u003e\n\u003cli\u003eChock the front wheels, lift the rear and support it on jack stands at the axle, remove the rear wheels, then free the lower shock ends: outer nuts (3\/4\" or 19mm), inner nuts and washers (6mm Allen on the studs), studs and spacers.\u003c\/li\u003e\n\u003cli\u003eOne side at a time (never remove both rear lower control arms together), remove a lower control arm (21mm), unbolt the sway bar link from the axle (18mm), cut off the shock and sway bar brackets with a cut-off wheel or plasma cutter, and grind the control arm bracket flat and clean.\u003c\/li\u003e\n\u003cli\u003eFit the skid plate at your level with the control arm bolt (without the arm) in the top hole and 3\/8\" bolts, washers and flange nuts in the rear holes, mark or punch the remaining holes, remove the plate, drill 3\/8\" holes, paint them and refit; for Levels 2-3 first trim the control arm brackets as the sheet shows (13\/16\" up for Level 2) and grind for fit if needed.\u003c\/li\u003e\n\u003cli\u003eWelding is optional (clean, tack, weld and paint); reinstall the lower control arm (bolts 125 ft-lbs), check the 3\/8\" bolts (45 ft-lbs), refit the sway bar link to the new bracket (75 ft-lbs) and repeat on the other side.\u003c\/li\u003e\n\u003cli\u003eTouch up bare metal with black paint, lube the lower shock bushings and fit the sleeves, mount the shock tops (37 ft-lbs), set the new spacer in the skid plate with the M12 x 120mm bolt and washer, compress the shock up into the plate, push the bolt through and fit the M12 washer and nut (56 ft-lbs); refit the wheels and torque the lug nuts per the service manual.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-install-sheet-1604.pdf?v=1792344053\" target=\"_blank\" rel=\"noopener\"\u003e999275 JK HD Skid Plate for Rear Falcon Shock Instructions (PDF)\u003c\/a\u003e, TeraFlex's own installation guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e TeraFlex's warranty list covers its skid plates for life and gives Falcon-branded products 1 year, so contact us and we will confirm which term applies to this Falcon shock skid plate before you order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTeraFlex extends its limited warranty only to the consumer who first bought the product, and only on the vehicle the part was first installed on. It does not pass to a later owner.\u003c\/li\u003e\n\u003cli\u003eCoverage starts on the purchase date and does not restart if a part is repaired or replaced.\u003c\/li\u003e\n\u003cli\u003eFor a covered defect, TeraFlex will either repair or replace the product (or the faulty part) free of charge or refund the purchase price, at its discretion, and it pays the freight to send a repaired or replacement part back to you.\u003c\/li\u003e\n\u003cli\u003eNot covered: damage from transportation, storage, improper use, skipped instructions or preventive maintenance, modifications, unauthorized repair, normal wear and tear, product finish, improper installation or maintenance, racing or competition, or accidents, abuse and neglect. Improper installation, poor maintenance, racing or competition use, and neglect or abuse void the warranty.\u003c\/li\u003e\n\u003cli\u003ePaint and powder coat finishes carry 90 days of defect coverage only, not wear from use.\u003c\/li\u003e\n\u003cli\u003eClaims: contact us first. Keep your proof of purchase or original invoice; removing the part from the vehicle and the inbound shipping are the owner's responsibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e Bumpers are heavy, large parts. Check the powder coat, welds and mounting tabs for freight damage before you sign for it if you can, match the hardware to the TeraFlex parts list, and contact us right away about any damage. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout TeraFlex\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 22px\/1.1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.06em;color:#14161a;\"\u003eTERAFLEX\u003cspan style=\"color:#ba232a;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eTeraFlex describes itself as a Jeep company at heart, started and staffed by people who drive them. It designs, engineers and builds suspension systems, shocks, axles and performance parts, with the Wrangler and Gladiator at the center of the range.\u003c\/p\u003e\n\u003cp\u003eThe company traces its roots to the 1950s and MEPCO (Military Equipment Parts Company), an early supplier of Jeep parts. TeraFlex Manufacturing followed in 1996 to build heavy-duty suspension for the TJ Wrangler, and today's catalog runs from full lift systems and the Falcon shock line to axles, steering and armor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized TeraFlex dealer.\u003c\/strong\u003e Prestige Truck is an authorized TeraFlex dealer, so what we sell is new and genuine TeraFlex. In TeraFlex's words, its limited warranty extends \"only to the consumer who originally purchased the product,\" so keep your receipt with your build records.\u003c\/p\u003e\u003c\/div\u003e","brand":"TeraFlex","offers":[{"title":"Default Title","offer_id":67835440070900,"sku":"36-07-01-300","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/teraflex-rockguard-armor-a010.jpg?v=1792344182","url":"https:\/\/prestigetruck.com\/products\/teraflex-falcon-hd-rear-shock-skid-plate-kit-2007-2018-jeep-wrangler-jk-36-07-01-300","provider":"Prestige Truck","version":"1.0","type":"link"}