{"product_id":"truxedo-pro-x15-tonneau-cover-2024-2026-toyota-tacoma-5-ft-bed-1456101","title":"TruXedo Pro X15 Soft Roll-Up Tonneau Cover for 2024-2026 Toyota Tacoma (5' Bed)","description":"\u003cp\u003eToyota redrew the Tacoma for 2024 and the cover changed with it: this application mounts to the deck rail system rather than clamping to a bare lip, so the rails have to be on the truck before the cover can go on. If yours did not come with them, Toyota sells them. Part 1456101 is the Pro X15 for the 2024-2026 Toyota Tacoma with the 5' (60\") bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Cover assembly\u003c\/li\u003e\n\u003cli\u003e1x Driver side rail\u003c\/li\u003e\n\u003cli\u003e1x Passenger side rail\u003c\/li\u003e\n\u003cli\u003e1x Bulkhead seal\u003c\/li\u003e\n\u003cli\u003e6x Anchor blocks\u003c\/li\u003e\n\u003cli\u003e6x Screws, 5\/16-18 x 7\/8\"\u003c\/li\u003e\n\u003cli\u003e6x Washers, 5\/16\"\u003c\/li\u003e\n\u003cli\u003e6x Formed brackets\u003c\/li\u003e\n\u003cli\u003e2x Corner block seals\u003c\/li\u003e\n\u003cli\u003e6x Screws, pan head, 1\/4-20 x 3\/4\"\u003c\/li\u003e\n\u003cli\u003e6x Hex nuts, 1\/4-20 nylon locking\u003c\/li\u003e\n\u003cli\u003e6x Washers, 1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA Woven Top, Not a Vinyl Sheet\u003c\/strong\u003e\u003cbr\u003eRTxTechWeave is a 120-grade textured composite built up in five layers. It pulls tighter than vinyl does and holds that shape, which is what takes the drumming out of the ride, and the weave shrugs off the scuffs that leave a vinyl cover looking tired after a few summers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRails Angled to Sit Low\u003c\/strong\u003e\u003cbr\u003eThe side rails are cut at 15 degrees so the closed cover finishes nearly level with your bed caps. TruXedo puts the drop at roughly a third lower than its own Lo Pro, and the practical effect is less to catch the wind and a cleaner line down the side of the truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTension That Resets Itself\u003c\/strong\u003e\u003cbr\u003eDriveTight lives in the front header, where two spring plungers keep pressure on the fabric as it expands in summer heat and contracts in winter. It is set at the factory and adjustable by hand afterwards, so there is no seasonal re-tensioning ritual and no turnbuckle to remember.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHook and Loop Down Both Rails\u003c\/strong\u003e\u003cbr\u003eThe RTxGrip closure is a multi-tiered hook-and-loop strip laid end to end along each rail rather than in patches. Push it home with your palms after every close and the edge of the cover has nothing for wind to get under, which is what keeps the sides quiet at speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Cross Tubes Underneath\u003c\/strong\u003e\u003cbr\u003eStraight aluminum cross tubes carry the span under the fabric so the surface does not belly out under standing rain or a load of wet snow. They are also why the closed cover reads as a flat plane rather than a tarp stretched over bows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne Finger on the Trigger Latch\u003c\/strong\u003e\u003cbr\u003eThe release is a trigger latch on the driver side rail. Drop the tailgate, pull it toward you and the rear header is free; roll the cover forward and clip both retainer hooks into their loops before you drive. TruXedo puts the latch on the driver side only, so the matching hole you will see in the passenger rail is a manufacturing convention, not a missing part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOff the Truck Without Tools\u003c\/strong\u003e\u003cbr\u003eThe quick-release handle disengages the header guides so the whole cover lifts clear of the rails in seconds, with the rails left clamped where they are. That turns a tall load from a problem into a two-minute job. A few bed designs in the range do not allow the system, and those applications say so in their own fitment notes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeals Where Beds Actually Leak\u003c\/strong\u003e\u003cbr\u003eTwo front corner seals, four end plug seals for the front and rear of both rails and a bulkhead seal on selected models are in the box. They go on with adhesive after the surfaces are cleaned with isopropyl alcohol, and the corners and tailgate ends they cover are precisely where an uncovered bed takes water.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2024-2026 Toyota Tacoma with the 5' (60\") bed. The manufacturer lists this part as: installation requires the factory deck rail system; if the truck has no deck rail system, one can be bought from Toyota. Pro X15 rails are cut for one truck and one box, so the part number on this page is the only one that fits this combination.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e TruXedo Pro X15\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover type:\u003c\/b\u003e Soft roll-up\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover material:\u003c\/b\u003e RTxTechWeave 120-grade textured composite, 5-layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrame:\u003c\/b\u003e Aluminum cross tubes with aluminum headers and side rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSide rails:\u003c\/b\u003e X15 15-degree rails, closing nearly flush with the bed caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTension system:\u003c\/b\u003e DriveTight automatic tension control, factory preset and owner adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClosure:\u003c\/b\u003e RTxGrip multi-tiered hook-and-loop down both rails, with a trigger latch on the driver side rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemoval:\u003c\/b\u003e Quick-release system; the cover lifts out without tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTested climate range:\u003c\/b\u003e -40F to 180F, up to 95% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Clamp-on side rails; nothing drilled into the truck\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation difficulty:\u003c\/b\u003e Level 1: Simple Installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation time:\u003c\/b\u003e Allow an hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e Limited lifetime on hard parts and limited lifetime on the fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAssembled in:\u003c\/b\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e 1456101\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 845742020011\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bracket-mounted to the deck rail system, no drilling  ·  \u003cb\u003eTime:\u003c\/b\u003e Allow an hour  ·  \u003cb\u003eTools:\u003c\/b\u003e Flat head screwdriver, Phillips head screwdriver, 1\/2\" and 7\/16\" wrench or socket, 3\/8\" ratchet drive; scissors and isopropyl alcohol are recommended  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Level 1, one person\u003c\/p\u003e\n\u003cp\u003eThe 2024 and newer Tacoma is a different installation from the rest of this family. The rails do not clamp to the bed lip: they mount on anchor blocks with screws and washers supplied in a hardware bag, and their spacing is dimensioned rather than judged by eye, 2\" from each bed cap at the tailgate end and 2-5\/8\" at the cab end, with downward pressure held while the bracket bolts are tightened. The sheet calls for two different tightening figures on different bracket screws, 4.5 ft-lb (6.10 Nm) and 8 ft-lb (11 Nm), and names the order rather than the fastener, so work from the sheet in the carton rather than from memory. Middle bracket fasteners are tightened after the front and rear ones.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/truxedo-pro-x15-tonneau-cover-2024-toyota-tacoma-install-sheet.pdf?v=1790177885\" target=\"_blank\" rel=\"noopener\" title=\"Pro X15 2024+ Toyota Tacoma Installation Sheet\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003ePro X15 2024+ Toyota Tacoma Installation Sheet (PDF)\u003c\/a\u003e, Document 1119122 revision C. The newest Tacoma mounts on anchor blocks at measured spacings rather than clamping to the bed lip, and this sheet carries both of the tightening figures that job uses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e Both halves of this cover are warranted for its lifetime: the fabric on one clause, and the hardware, which TruXedo defines as rails, clamps and bows, on another. Only the first owner is covered, the cover does not pass to a second, and a dated receipt or a completed registration has to exist. Most refused claims come down to a short list of conditions. Wash it with a mild automotive soap, nothing with silicone or petroleum in it. Whenever the truck is in motion the cover has to be latched down or rolled right up with both straps on; part-open driving is excluded. Keep cargo from pushing up into the fabric. Sweep snow and ice off the top before you open it. Give the rail clamps a check a week in and occasionally from then on. Never leave the rolled cover resting on the cab or the back glass, and take it off the truck before anyone tows the truck backwards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e This is a parcel item rather than a freight one, and stock normally leaves the warehouse within 1 to 2 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e The Pro X15 ships as a parcel rather than on a pallet, in a long carton that takes the handling on the cover's behalf. Look it over while the driver is still there. Open it the same day and count the seals and clamps against the parts list in the sheet, because a missing end plug seal or a bent rail is far easier to sort in the first week than in the third. TruXedo ships replacement parts direct, and damage noted on the delivery paperwork is what lets us move quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout TruXedo\u003c\/h3\u003e\n\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eYankton, South Dakota is where TruXedo puts its bed covers together, and the company's cover of choice for a buyer who wants quiet is this one. Claims run to the first owner only, need a dated receipt kept somewhere findable, and are honored on covers sold by dealers the manufacturer has approved. That is us, so what ships from here is a warranted Pro X15 rather than a listing that merely borrows the name.\u003c\/p\u003e\n\u003cp\u003eThe Pro X15 is the quiet one in the soft roll-up range. TruXport is the entry cover and Lo Pro is the low-profile vinyl signature; the Pro X15 keeps the low profile and swaps vinyl for RTxTechWeave canvas, which is what changes the noise. Pro X15 TS is the same cover with T-slot rails cut into it for racks and cargo accessories, and the Deuce rolls up like these but also hinges open at the cab end. Above all of them sit the two hard roll-ups, Sentry in vinyl over aluminum slats and Sentry CT in canvas over the same slats, which are the covers to look at if a lock rather than a latch is the deciding factor.\u003c\/p\u003e\n\u003cp\u003eEverything TruXedo builds works on the same idea: a tensioned surface over an aluminum frame, clamped to the bed rather than bolted through it. Its tension and closure hardware is patented in-house, and the point of both is that nobody has to retension a cover by hand years after buying it. On the Pro X15 the surface is the woven RTxTechWeave top, the frame is a set of straight aluminum cross tubes, and the hardware carries a limited lifetime warranty alongside the fabric.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TruXedo","offers":[{"title":"Default Title","offer_id":50527123996916,"sku":"TRX1456101","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/truxedo-pro-x15-tonneau-cover-closed-5_84a99290-281b-48fa-9f8a-aca95c27278a.jpg?v=1790252396","url":"https:\/\/prestigetruck.com\/products\/truxedo-pro-x15-tonneau-cover-2024-2026-toyota-tacoma-5-ft-bed-1456101","provider":"Prestige Truck","version":"1.0","type":"link"}