{"product_id":"truxedo-sentry-tonneau-cover-2020-2026-gmc-sierra-1500-5-ft-10-in-bed-1574301","title":"TruXedo Sentry Hard Roll-Up Tonneau Cover for 2020-2026 GMC Sierra 1500 (5'10\" Bed)","description":"\u003cp\u003eThis Sentry is made for the 2020-2027 GMC Sierra 1500 with the 5'10\" bed (69.9\"). That is the box GM calls its 5'8\" short box. It is cut for trucks with the CarbonPro bed. You get a 3-year limited warranty from TruXedo. Unlike most Sentry fits, this one requires drilling: you drill 9\/32\" (7 mm) holes through the plastic bed caps with the supplied drill guides, then fasten the rails with U-nuts. The slats are rated for 400 lb when the load is spread out. You get a rigid, slat-built cover with a leather-grain vinyl finish that still rolls up to the cab like a soft roll-up. Lock a key-lock tailgate and the cover stays secured along with it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoll cover\u003c\/li\u003e\n\u003cli\u003eDriver cover rail\u003c\/li\u003e\n\u003cli\u003ePassenger cover rail\u003c\/li\u003e\n\u003cli\u003eBulkhead seal\u003c\/li\u003e\n\u003cli\u003e6 clamps\u003c\/li\u003e\n\u003cli\u003e12 button screws (M6 x 30 mm)\u003c\/li\u003e\n\u003cli\u003e10 U-nuts\u003c\/li\u003e\n\u003cli\u003e2 drill guides\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeather-Grain Vinyl Top\u003c\/strong\u003e\u003cbr\u003eThe Sentry is topped with DualShield, TruXedo's industrial-grade vinyl with a leather-grain finish, laid over the slats as a single aluminum-reinforced piece. It gives the cover a clean, tailored look, and it is the main difference between this cover and the canvas-topped Sentry CT.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Aluminum Slats\u003c\/strong\u003e\u003cbr\u003eUnder the vinyl, interlocking aluminum slats form a rigid deck that can't be sliced open the way a soft cover can. TruXedo rates it at 400 lb when the weight is spread evenly, and since a roll-up needs no canister, the full length of the bed stays usable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRail Security Latch\u003c\/strong\u003e\u003cbr\u003eRoll the cover shut and a security latch at the center of the rail engages, so the cover can't be lifted at the sides. Up to six latches set themselves as it closes, backed by patented level-2 locks and a tension cable. With a key-locking tailgate, the cover stays locked down until you unlock and drop the gate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRolls Up to the Cab\u003c\/strong\u003e\u003cbr\u003eDrop the tailgate, tug the release cable on either side and roll the cover forward on TruXedo's PrecisionRoll system. Fasten the two built-in straps and you can drive with the bed fully open, and your rear window stays clear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSealed on All Four Sides\u003c\/strong\u003e\u003cbr\u003eThe vinyl top is one seamless panel, with flush-fitting seals along the side rails and seals on all four sides, and industrial-grade hook-and-loop strips keep the edges from lifting in the wind. TruXedo claims it seals better than any other folding, roll-up or retractable cover. It is weather-resistant, not airtight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Profile, Blacked-Out Finish\u003c\/strong\u003e\u003cbr\u003eTruXedo describes the Sentry as an extremely low-profile cover. Its aluminum carries StealthShield, a 360-degree blackout finish, so the hardware looks finished whether the cover is rolled open or closed.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cstyle\u003e.pt-fit{margin:10px 0 4px;position:relative}.pt-fit\u003einput{position:absolute;width:1px;height:1px;opacity:0;margin:0;pointer-events:none}.pt-fit__tabs{display:flex;flex-wrap:wrap;gap:6px;margin:0 0 12px;padding:0}.pt-fit__tabs label{display:inline-flex;align-items:center;gap:7px;cursor:pointer;padding:6px 14px;border:1px solid #e2e4e6;border-radius:999px;background:#f2f3f4;color:#4a5057;font-weight:700;line-height:1.35}.pt-fit__tabs label\u003espan{display:inline-flex;align-items:center;justify-content:center;box-sizing:content-box;min-width:1.5em;height:1.5em;padding:0 .3em;line-height:1;font-size:.75em;font-weight:700;color:#8a9099;background:#ffffff;border-radius:999px}.pt-fit__tabs label:hover{background:#e8eaec}.pt-fit__p{display:block}#ptfit-1574301 .pt-fit__p{display:none}.pt-fitw{overflow-x:auto;border:1px solid #e6e6e6;border-radius:8px;background:#ffffff;margin:10px 0 4px}.pt-fitw table{display:table;table-layout:fixed;width:100%;margin:0;border-collapse:separate;border-spacing:0;border:none;min-width:560px}.pt-fitw caption{caption-side:top;text-align:left;padding:0 0 8px;font-weight:700;letter-spacing:.06em;text-transform:uppercase;color:#8a9099;font-size:.8em}.pt-fit .pt-fitw caption{position:absolute;width:1px;height:1px;padding:0;overflow:hidden;clip-path:inset(50%);white-space:nowrap}@media print{.pt-fit .pt-fitw caption{position:static!important;width:auto!important;height:auto!important;clip-path:none!important;padding:0 0 8px!important}}.pt-fitw th{background:#141414;color:#ffffff;text-align:left;padding:11px 14px;font-weight:700;font-size:12px;letter-spacing:.09em;text-transform:uppercase;border:none;white-space:nowrap}.pt-fitw td{padding:11px 14px;border:none;border-bottom:1px solid #ececec;background:#ffffff;vertical-align:top}.pt-fitw tbody tr:nth-child(even) td{background:#f7f7f7}.pt-fitw tbody tr:last-child td{border-bottom:none}.pt-fitw td.y{font-weight:700;white-space:nowrap}.pt-fitw td.b{white-space:nowrap}.pt-fitw td.n{color:#5a6067;font-size:.92em}.pt-fitw td.e{color:#c4c8cc}#ptfit-1574301\u003e.pt-fit__panels\u003e.pt-fit__p:first-of-type{display:block}#ptfit-1574301\u003einput:checked~.pt-fit__panels\u003e.pt-fit__p{display:none}@media print{#ptfit-1574301 .pt-fit__tabs{display:none}#ptfit-1574301 .pt-fit__p{display:block!important}#ptfit-1574301 .pt-fitw{overflow:visible!important}#ptfit-1574301 .pt-fitw table{min-width:0!important}}\u003c\/style\u003e\u003cdiv class=\"pt-fitw\"\u003e\u003ctable\u003e\n\u003ccaption\u003eGMC\u003c\/caption\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width:22%\"\u003e\n\u003ccol style=\"width:28%\"\u003e\n\u003ccol style=\"width:12%\"\u003e\n\u003ccol style=\"width:38%\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"y\"\u003e2020-2027\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd class=\"b\"\u003e5'10\" (69.9\")\u003c\/td\u003e\n\u003ctd class=\"n\"\u003ewith CarbonPro Bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0 0 8px;\"\u003e\u003cstrong\u003eCheck your bed:\u003c\/strong\u003e first confirm your Sierra has the CarbonPro bed, then measure along the bed rail from the bulkhead to the inside of the closed tailgate: about 69.9\". GM sells this box as its 5'8\" short box; TruXedo labels it 5'10\". It is the version for the CarbonPro bed.\u003c\/p\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e a 5'10\" box without the CarbonPro bed (Sentry 1572401), the 6'7\" box (1572601), the 8'2\" box (1572801).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e TruXedo\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e 1574301\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover Type:\u003c\/b\u003e Hard roll-up\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTop Surface:\u003c\/b\u003e DualShield leather-grain vinyl, industrial grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStructure:\u003c\/b\u003e Interlocking aluminum slats\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e StealthShield 360-degree blackout aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLoad Capacity:\u003c\/b\u003e 400 lb, evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking:\u003c\/b\u003e Patented level-2 locks, tension cable, up to 6 automatic latches; secured when closed on a locked tailgate (key-lock tailgates)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Access:\u003c\/b\u003e 100% when rolled to the cab\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Clamps with U-nuts; requires drilling 9\/32\" (7 mm) holes through the plastic bed caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemoval:\u003c\/b\u003e Quick release, no tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStake Pockets:\u003c\/b\u003e Stay accessible\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed Length:\u003c\/b\u003e 5'10\" (69.9\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 845742017462\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Clamp-on with U-nuts; you drill 9\/32\" (7 mm) holes through the plastic bed caps using the supplied drill guides · \u003cb\u003eTime:\u003c\/b\u003e Under 1 hour · \u003cb\u003eDifficulty:\u003c\/b\u003e Level 1; a second person helps when setting the rails · \u003cb\u003eTools:\u003c\/b\u003e T30 Torx drive; 1\/2\" wrench or socket; Drill with a 9\/32\" (7 mm) bit; Torque wrench for the 8 ft-lb setting; Isopropyl alcohol; Scissors or a utility knife\u003c\/p\u003e\n\u003cp\u003eHere's the short version for the CarbonPro bed. Follow TruXedo's CarbonPro install sheet (below) for the exact U-nut and drilling positions.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eSeal the bulkhead.\u003c\/b\u003e If your bed has factory bed caps, wash the seal area with soap and water, wipe it with isopropyl alcohol and let it dry. Stick the bulkhead seal from one bed rail to the other, flush with the bulkhead's inside edge and tight against the rail end plug seal and the bed cap, trim the excess and press it down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit the U-nuts.\u003c\/b\u003e Pry the plastic bed cap away from the bed and slip each U-nut underneath it onto the carbon side, lined up with the bed rail hole. The U-nut at the tailgate end faces the opposite way. Repeat on the passenger side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill the bed caps.\u003c\/b\u003e Slide the drill guide between the plastic cap and the bed, lined up with each U-nut, and with the factory threaded hole where the bed cap's sheet metal already has one. Drill a 9\/32\" (7 mm) hole through the plastic cap at every point on both sides; the guide keeps the bit off the bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount the side rails.\u003c\/b\u003e Set the driver and passenger rails in place (a helper is recommended). Run a screw through each clamp and the rail cutout into its U-nut, starting with the cab and tailgate holes, then the four middle clamps. Tighten from the tailgate toward the cab with a T30 driver, pushing the rail into the bed cap so it seals, to 8 ft-lb (11 Nm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAttach the cover.\u003c\/b\u003e Set the rolled cover on the rails near the cab, then push both header guides into their locked spot until each one clicks (lift the rail slightly if they bind).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUnroll, latch and check.\u003c\/b\u003e Unroll the cover to the tailgate and push down near both rear corners until the latches click. Press the hook-and-loop strips down along both sides before you drive, leave the cover closed for 24 hours, and re-check the rail clamps after your first week of driving.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/truxedo-truxedo-sentry-tonneau-cover-19-26-gm-carbonpro-install.pdf?v=1792122981\" target=\"_blank\" rel=\"noopener\" title=\"TruXedo Sentry\/Sentry CT Tonneau Cover 19-26 GM w\/ CarbonPro Installation Guide\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eTruXedo Sentry\/Sentry CT Tonneau Cover 19-26 GM w\/ CarbonPro Installation Guide (PDF)\u003c\/a\u003e, TruXedo's own installation sheet (Part# 1118565 Rev. C 8-20-26).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e TruXedo covers the Sentry against defects in materials and workmanship for three years from your original purchase date.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe hardware (rails, clamps and every other included part) and the cover fabric, the vinyl top, each carry a 3-year limited warranty.\u003c\/li\u003e\n\u003cli\u003eA defective cover, tarp or hardware part is repaired or replaced, at TruXedo's option; TruXedo may substitute a newer model of similar form and function.\u003c\/li\u003e\n\u003cli\u003eCovers the first owner only and can't be transferred. Registration on file or a detailed, dated receipt is required, so keep your receipt; contact us for help registering your cover.\u003c\/li\u003e\n\u003cli\u003eTo keep it valid: wash only with mild car soap and water, with no silicone or petroleum conditioners; when the truck moves, keep the cover either fully closed and latched or fully rolled up and strapped at the cab with both retainer straps, never partly open; don't tie cargo to its framework; check the rail clamps after the first week of driving and now and then after that; don't roll it into or stow it against the cab window; if it stays rolled open a long time, re-roll it and re-fasten the straps now and then; clear snow and ice before opening; and remove it before the truck is towed from the rear.\u003c\/li\u003e\n\u003cli\u003eClaims: contact us first; a Return Material Authorization (RMA) number from TruXedo is needed before anything is sent back. TruXedo may ask for the part back, postage prepaid, and shipping charges apply to any repair or replacement.\u003c\/li\u003e\n\u003cli\u003eNot covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping.\u003c\/strong\u003e Ships free to the lower 48 states, with no minimum order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrder by 5 PM ET on a business day and it starts processing the same day.\u003c\/li\u003e\n\u003cli\u003eShips by parcel carrier in a long box, not on a pallet, so there's no freight appointment to wait in for.\u003c\/li\u003e\n\u003cli\u003eMost orders arrive within 1-5 business days.\u003c\/li\u003e\n\u003cli\u003eWe email your tracking number as soon as it ships.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e This cover ships in a long, heavy box. Check it as soon as it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLook for crushed ends, punctures or tears in the carton.\u003c\/li\u003e\n\u003cli\u003eIf something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).\u003c\/li\u003e\n\u003cli\u003eOpen the box and check the parts against the parts list before you install.\u003c\/li\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with your order number. We reply within 1-2 business days with instructions.\u003c\/li\u003e\n\u003cli\u003eDamaged, defective or wrong item: we send a prepaid label or arrange a pickup.\u003c\/li\u003e\n\u003cli\u003eChanged your mind: you pay return shipping. No restocking fee.\u003c\/li\u003e\n\u003cli\u003eRefunds go back to your original payment method within 7 business days of approval. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003ereturns policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAbout TruXedo\u003c\/h3\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;align-items:flex-start;margin:6px 0 4px;\"\u003e\n\u003cdiv style=\"flex:0 0 150px;max-width:150px;border:2px solid #14161a;padding:12px 8px;text-align:center;font:700 24px\/1 Rajdhani,'Arial Narrow',sans-serif;letter-spacing:.04em;color:#14161a;\"\u003eTRU\u003cspan style=\"color:#ba232a;\"\u003eX\u003c\/span\u003eEDO\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 340px;min-width:240px;\"\u003e\n\u003cp\u003eTruXedo makes soft and hard roll-up tonneau covers.\u003c\/p\u003e\n\u003cp\u003eThe Sentry and Sentry CT are the two TruXedo covers built on interlocking aluminum slats rather than fabric over bows. The Sentry pairs the slats with a leather-grain vinyl top and a 3-year warranty; the Sentry CT uses RTxTechWeave canvas and carries 5 years.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:16px 0 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eAuthorized TruXedo dealer.\u003c\/strong\u003e TruXedo states that a cover bought from an authorized dealer is eligible for the full manufacturer's warranty, and warns that covers bought through eBay or other unauthorized sellers may not be covered. Prestige Truck is an authorized TruXedo dealer, so your Sentry arrives new, genuine and with the full 3-year warranty.\u003c\/p\u003e\u003c\/div\u003e","brand":"TruXedo","offers":[{"title":"Default Title","offer_id":50527190417652,"sku":"TRX1574301","price":1279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/truxedo-sentry-01-tbs-10.jpg?v=1792130435","url":"https:\/\/prestigetruck.com\/products\/truxedo-sentry-tonneau-cover-2020-2026-gmc-sierra-1500-5-ft-10-in-bed-1574301","provider":"Prestige Truck","version":"1.0","type":"link"}