{"product_id":"undercover-select-tonneau-cover-2022-2026-ford-maverick-4-ft-4-in-bed-sl24032","title":"UnderCover Select Hard Folding Tonneau Cover for 2022-2026 Ford Maverick (4'4\" Bed)","description":"\u003cp\u003eMaverick buyers are the most price-conscious people in the segment, and they are right to be. Automatic dual slam latches lock each panel as it comes down, and a single cable pull from either side of the tailgate releases them again, with no external lock sitting on the outside for anyone to work at. The panels are multi-layer aircraft-grade aluminum in a fade-resistant matte black, rated to carry 300 lb spread evenly across the closed cover, and it clamps on in half an hour. This is part SL24032, the Select built for the 2022-2026 Ford Maverick with the 4'4\" bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Passenger side rail\u003c\/li\u003e\n\u003cli\u003e1x Driver side rail\u003c\/li\u003e\n\u003cli\u003e1x Hard fold cover\u003c\/li\u003e\n\u003cli\u003e1x Bulkhead seal (on select make\/models)\u003c\/li\u003e\n\u003cli\u003e6-8x Rubber filler strips (on select make\/models)\u003c\/li\u003e\n\u003cli\u003e4x Cover retainer clamps\u003c\/li\u003e\n\u003cli\u003e6-8x Clamps (on select make\/models)\u003c\/li\u003e\n\u003cli\u003e2x Drain tubes\u003c\/li\u003e\n\u003cli\u003eUnderCover includes its cargo retriever with the Select, with storage hooks so it stows in the bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic Dual Slam Latches\u003c\/strong\u003e\u003cbr\u003ePush the cover down and dual slam latches lock it, with no manual clamps to work along the bed rail and nothing to remember on the way out. It is the difference between closing a tailgate and performing a small ritual every time you finish loading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne Cable Pull From Either Side\u003c\/strong\u003e\u003cbr\u003eA single cable pull releases the latches, and there is one at each side of the tailgate, so it opens from whichever side you happen to be standing on. No walking around the truck to find the handle in the rain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo External Locks to Tempt Anyone\u003c\/strong\u003e\u003cbr\u003eUnderCover builds the Select with no tamper-susceptible external locks or latches on the outside of the cover. There is no cylinder to drill and no handle to lever, and the release cables sit inside the bed, so a locked tailgate closes the whole bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti-Layer Aircraft-Grade Aluminum\u003c\/strong\u003e\u003cbr\u003eThe panels are a rock-solid multi-layer build in heavy-duty aircraft-grade aluminum, rated to carry up to 300 lb spread evenly across the closed cover. That covers a winter's snow load or flat sheet goods, provided the weight is distributed rather than parked on one panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA Matte Black Finish Built to Hold Its Color\u003c\/strong\u003e\u003cbr\u003eThe aluminum panels are treated in matte black to sit with the truck's own trim, and the coating is specified to resist fading. It is not the textured coating UnderCover puts on its top folding cover, and it is not sold as one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Thirds Open, and You Can Drive It\u003c\/strong\u003e\u003cbr\u003eFold the panels forward for two thirds of the bed and secure the stack on the integrated clips, and the truck is safe to drive with cargo too tall for a closed cover. Nothing has to come off the truck and nothing needs storing in the garage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThirty Minutes, Nothing Drilled to Mount It\u003c\/strong\u003e\u003cbr\u003eUnderCover rates the Select a Level 1 install at 30 minutes or less. A vehicle-specific mounting kit locates the side rails on your bed and the clamps do the rest, with no hole made in the truck to mount the cover on any application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree-Year Limited Warranty\u003c\/strong\u003e\u003cbr\u003eStructure, hinges, seals and hardware are all covered for three years from the date of purchase. Wash it with mild automotive soap and water, keep solvents and insect repellents off the rubber, and the terms are straightforward.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Fits the 2022-2026 Ford Maverick with the 4'4\" bed.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e UnderCover Select\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCover type:\u003c\/b\u003e Hard folding tonneau cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Multi-layer heavy-duty aircraft-grade aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Matte black, with a durable fade-resistant coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLoad rating:\u003c\/b\u003e 300 lb evenly distributed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed access:\u003c\/b\u003e Two-thirds open, secured on integrated clips and rated to drive with oversized cargo; fully upright behind the cab with both prop rods fitted and the buckles secured\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatching:\u003c\/b\u003e Automatic dual slam latches that lock when the cover is closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRelease:\u003c\/b\u003e Single cable pull from either side of the tailgate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExternal locks:\u003c\/b\u003e None; the Select carries no external locks or latches, and security depends on locking the tailgate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeather sealing:\u003c\/b\u003e Flush-fitting side seals with integrated drain rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Clamp-on side rails on a vehicle-specific mounting kit, nothing drilled into the truck to mount the cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation difficulty:\u003c\/b\u003e Level 1: Simple installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation time:\u003c\/b\u003e 30 minutes or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 3-year limited, on the structure and on the hinges, seals and hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of origin:\u003c\/b\u003e Assembled in the USA, in Missouri\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Clamp-on side rails on a vehicle-specific mounting kit, nothing drilled into the truck to mount the cover · \u003cb\u003eTime:\u003c\/b\u003e 30 minutes or less · \u003cb\u003eTools:\u003c\/b\u003e Scissors or utility knife, Isopropyl alcohol, 1\/2\" Wrench or socket, Phillips screwdriver, 5\/8\" Drill bit \u0026amp; drill · \u003cb\u003eDifficulty:\u003c\/b\u003e Level 1: Simple installation\u003c\/p\u003e\n\u003cp\u003eA vehicle-specific mounting kit locates the side rails on your bed, the rails clamp to the inside of your bed rails with the hardware in the box, and the cover sits on the rails. Set the rails square to the bed rails, at 90 degrees, before you tighten anything. UnderCover prints that warning in capitals because the rear latch has nothing to catch on otherwise, and a latch that will not close is nearly always a rail that is out of square.\u003c\/p\u003e\n\u003cp\u003eThe drain tubes can be routed behind a bedliner, through the factory bed plugs, or through a 5\/8\" hole if you prefer to drill one. None of those three routes is needed to hold the cover on.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSide-rail clamp bolts, with a 1\/2\" wrench or socket:\u003c\/b\u003e 10 ft-lb\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/undercover-undercover-select-tonneau-cover-standard-isheet.pdf?v=1786877163\" target=\"_blank\" rel=\"noopener\" title=\"Official UnderCover Select installation guide (PDF)\" style=\"color:#ba232a;font-weight:700;text-decoration:underline;\"\u003eOfficial UnderCover Select installation guide (PDF)\u003c\/a\u003e, the manufacturer's step-by-step guide.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty.\u003c\/strong\u003e UnderCover covers the Select with a three (3) year limited warranty from the original date of purchase, on the structure and on the hinges, seals and hardware alike. Four conditions in the terms catch people out more than the rest. The cover must be free of all foreign materials, including snow and ice, before you open it. It must be secured at all points whenever the vehicle is moving. It has to come off the truck before the truck is towed from the rear. And every clamp and retention mechanism wants checking for tightness about a week after installation and periodically after that. Washing is mild automotive soap and water only, since abrasive cleaners dull the finish and insect repellents, oils, solvents and lubricants can attack the rubber hinges and seals, which voids the warranty. The terms also exclude neglect, improper installation, modification of the mounting hardware, alterations, added equipment, abuse, accident, weather damage and normal wear, and they do not cover paint damage to the truck. Repair or replacement is at UnderCover's discretion and transport costs are not covered. \u003cstrong\u003eFree shipping.\u003c\/strong\u003e This cover ships free within the contiguous United States as an oversized package rather than a freight shipment. \u003cstrong\u003eInspect on delivery.\u003c\/strong\u003e The carton is long, flat and light for its size, and the corners are what take the knocks in transit. Give it a proper look before you sign for it, and if the box arrives crushed, split or soaked, note that on the delivery paperwork and tell us the same day so a replacement can start moving.\u003c\/p\u003e\n\u003ch3\u003eAbout UnderCover\u003c\/h3\u003e\n\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eUnderCover is part of the RealTruck group of truck accessory brands and builds hard folding and one-piece bed covers for full-size and mid-size pickups. Its hard folding covers are assembled in the USA, in Missouri. The Select is covered by a three year limited warranty on the cover, dated from the original purchase, and warranty registration and replacement parts are handled by the manufacturer.\u003c\/p\u003e\n\u003cp\u003eSelect is the entry point to UnderCover's hard folding range and the most straightforward cover in it. Automatic dual slam latches lock it as it closes and a single cable pull releases them. It opens two thirds of the bed on integrated clips, is rated to drive folded, and installation is quoted at 30 minutes or less. It is also the one cover in the folding range rated to 300 lb rather than 400 lb, which is the trade for the price. Flex is the next step up and the only gloss black cover UnderCover makes. Ultra Flex adds the patented rail and clamp mechanism, slam latches on every panel and a five year term. ArmorFlex tops the range with its Multi-Shield coated face. The one-piece covers are a different format altogether, raising a single rigid lid: Elite and SE in matte black, Elite LX and LUX unpainted or painted to an OEM paint code.\u003c\/p\u003e\n\u003cp\u003eThe Select is the simplest build in the folding range, and the specification is honest about it. Rock-solid multi-layer construction in heavy-duty aircraft-grade aluminum is rated to 300 lb evenly distributed, rather than the 400 lb the other three carry. Flush-fitting side seals close the perimeter and integrated drain rails carry water out of the bed. It clamps on with a vehicle-specific mounting kit, nothing drilled into the truck, under a durable fade-resistant matte black coating.\u003c\/p\u003e\n\u003cp\u003ePrestige Truck is an authorized UnderCover dealer. Every cover we ship is new, in the factory carton, and covered by UnderCover's warranty direct from the manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UnderCover","offers":[{"title":"Default Title","offer_id":49443647914228,"sku":"UNDSL24032","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/0efb645f99539b457d0ea3956a6b8c0f_07863fda-896d-4ace-a0a1-53b8ace5e286.jpg?v=1789924359","url":"https:\/\/prestigetruck.com\/products\/undercover-select-tonneau-cover-2022-2026-ford-maverick-4-ft-4-in-bed-sl24032","provider":"Prestige Truck","version":"1.0","type":"link"}