{"product_id":"undercover-swingcase-truck-bed-toolbox","title":"UnderCover SwingCase Swing-Out Truck Bed Toolbox","description":"\u003cp\u003eThe SwingCase is a molded toolbox that bolts to the inside of your bed side panel, sits in the dead space over the wheel arch and swings out over the tailgate when you want it. That is the whole idea: it takes storage you were never using and puts it where your hands already are, without eating floor space or standing up above the bed rails. Each case holds 1.5ft³ and carries up to 75 lb, the lid locks with a key, and the case lifts straight off its hinge pins when you need the bed completely clear. Driver-side and passenger-side cases are separate part numbers and you can run one or both.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStorage Where The Bed Was Wasted\u003c\/strong\u003e\u003cbr\u003eThe case sits over the wheel arch, which is the one part of a pickup bed nothing else can use. You get 1.5ft³ of enclosed storage without losing floor length, without losing height under the bed rails and without a chest across the bulkhead that stops long loads going in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwings Out Over The Tailgate\u003c\/strong\u003e\u003cbr\u003eDrop the tailgate, pull the release and the case rotates out of the bed and over the tailgate on its pivot. Everything inside comes to you at waist height. You are not climbing into the bed or reaching over a rail to get at a socket set, which is the reason most people buy one of these rather than a chest.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Lid Locks With A Key\u003c\/strong\u003e\u003cbr\u003eA rotary latch set into the molded lid takes a key, so the case can be left loaded in a bed that is otherwise open. It is a deterrent rather than a safe, and the manufacturer does not claim more than that, but it is the difference between tools you can leave in the truck and tools you carry in and out every day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarries Up To 75 lb\u003c\/strong\u003e\u003cbr\u003eUnderCover rates each case at up to 75 lb. That covers a full socket set with a cordless drill and its batteries, a recovery strap and a tow rope, or a couple of tackle trays. Packing it low and flat along the base rather than standing something heavy up in one corner is our own advice and not a manufacturer condition: the published rating is a plain 75 lb with no distribution qualifier attached to it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifts Off Without Tools\u003c\/strong\u003e\u003cbr\u003eThe case sits on hinge pins. Lift it straight up and it comes off, leaving two low brackets on the bed side and a completely clear bed. It goes back on in seconds. Some applications also ship a pivot lock, which still lets the case swing out but stops it being lifted off the pins by anyone else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Lid And Molded Body\u003c\/strong\u003e\u003cbr\u003eThe body is an impact-resistant ABS composite and the lid closes onto a weathertight seal, so what is inside is protected from spray and from the weather the bed is exposed to. It is a bed accessory rather than a dry box, and it is not represented as submersible or airtight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Separate Parts, One Per Side\u003c\/strong\u003e\u003cbr\u003eDriver-side and passenger-side cases carry different part numbers and are mirror images of each other. Many owners fit both. They are not interchangeable and, importantly, they do not always share the same fitment: an obstruction on one side of a bed rules out that side's case and leaves the other side fitting normally.\u003c\/p\u003e\n\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\n{{PENDING_FITMENT_TABLE:swingcase}}\n\u003cdiv style=\"background:#faf7f7;border-left:4px solid #ba232a;border-radius:0 8px 8px 0;padding:14px 16px;margin:12px 0;\"\u003e\n\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eFit guidance:\u003c\/strong\u003e Every SwingCase is made for one truck and one side of the bed, so pick your truck above to reach the right part number, and note that the driver-side and passenger-side cases are separate parts. The SwingCase will not work with bed extenders. Spray-in bed liners are fine. A drop-in plastic liner or a bed rug will need trimming, because the brackets must fasten to bare sheet metal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Wheel-well swing-out toolbox\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Impact-resistant ABS composite\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage volume:\u003c\/b\u003e 1.5ft³\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLoad rating:\u003c\/b\u003e Up to 75 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatch:\u003c\/b\u003e Key-lockable rotary latch with a weathertight lid seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty:\u003c\/b\u003e 1 year on the ABS structure and 1 year on the lock, hinges and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eType:\u003c\/b\u003e Bracket-mounted  ·  \u003cb\u003eTime:\u003c\/b\u003e 30 minutes or less  ·  \u003cb\u003eDifficulty:\u003c\/b\u003e Level 1, one person\u003c\/p\u003e\n\u003cp\u003eMounting method, hardware and tools all change from truck to truck on this product: some applications bolt to holes the bed already has, most drive self-drilling screws into the bed side panel, and one bonds in bolt plates. The guide for your own truck is on that truck's page. The SwingCase will not work with bed extenders.\u003c\/p\u003e\n\u003cp\u003eBed liners matter here and the manufacturer is consistent about them across all 65 sheets. A spray-in liner poses no problem. A drop-in plastic liner or a carpeted bed rug has to be trimmed, because the brackets must fasten directly to the bed's sheet metal and will not sit correctly on top of a liner. On a bed rug the brackets generally pass underneath and you cut slots for the latch and the lock to come through. The manufacturer will not give exact trim dimensions because every liner brand fits differently.\u003c\/p\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation sheets are published per part rather than per series on this product line. Select your truck above and the sheet for that exact part is linked on its page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, Shipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer covers the SwingCase for one year on the ABS polymer structure and one year on the lock, the hinges and the hardware. It runs to whoever bought it first, is not transferable, and the receipt is asked for. A few things fall outside it and are worth knowing before you buy: damage from improper installation, including modifying the supplied mounting hardware; damage from chemicals not labeled as safe for plastics; normal wear where the case has not been maintained; and damage to the truck's own paint, which is excluded by name.\u003c\/p\u003e\n\u003cp\u003eBefore the driver leaves, open the box and look over the case, its lid and the two brackets. If anything is marked, write it on the delivery paperwork there and then. That note is what gets a replacement moving without an argument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns.\u003c\/strong\u003e Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our \u003ca href=\"https:\/\/prestigetruck.com\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e, or email \u003ca href=\"mailto:support@prestigetruck.com\"\u003esupport@prestigetruck.com\u003c\/a\u003e with any question.\u003c\/p\u003e\n\u003ch3\u003eAbout UnderCover\u003c\/h3\u003e\n\u003cdiv class=\"pt-about\" style=\"margin:6px 0 4px;\"\u003e\n\u003cp\u003eUnderCover sits inside the RealTruck family of truck accessory brands, and most of what it makes goes over a pickup bed: hard folding panel covers and one-piece rigid lids, for full-size and mid-size trucks alike. Registration, claims and spare parts are all dealt with by the manufacturer, and the cover it writes follows the person who bought the product first. Prestige Truck is a dealer the brand recognizes, so a case ordered from us reaches you new in its factory carton with that backing intact.\u003c\/p\u003e\n\u003cp\u003eThe SwingCase is the exception in the range: everything else here mounts above the bed and this one lives in it. On the folding side the range runs ArmorFlex, Ultra Flex, Flex and Select. On the one-piece side it runs Elite and SE in matte black, with Elite LX and LUX supplied bare or finished to a factory paint code. A SwingCase is the only item in the catalog that a single truck can take two of, one per side of the box. Whether a given cover clears a given SwingCase depends on the exact part, and every exclusion the manufacturer publishes is printed on that part's own page.\u003c\/p\u003e\n\u003cp\u003eThe case is one impact-resistant ABS composite shell with a sealed lid, a key-lockable rotary latch and a pivot that carries the whole thing out past the tailgate. Nothing gets assembled and nothing gets tensioned. Fitting it comes down to two brackets and a handful of fasteners, and which brackets, which fasteners and which technique all change from truck to truck, which is why each part links the installation sheet written for it rather than a generic one.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UnderCover","offers":[{"title":"Default Title","offer_id":50527365955828,"sku":"UND-PARENT-SWINGCASE","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/4784\/0244\/files\/undercover-swingcase-truck-bed-toolbox-installed-closed_719b85be-ef68-41d1-ba5c-a5e5a676ba35.jpg?v=1790333434","url":"https:\/\/prestigetruck.com\/products\/undercover-swingcase-truck-bed-toolbox","provider":"Prestige Truck","version":"1.0","type":"link"}