This is the current-generation bracket kit that mounts a CargoGlide 2.0 on top of a DECKED vX or vY Drawer System. It is hardware only and it requires both halves to be useful: you need the drawer system and you need the CargoGlide, and neither is included here. It is also not the Legacy bracket kit, which is a separate part for the older generation and is physically different.
DECKED describes the pairing as coffee and donuts, and the practical version is that you get storage underneath and a sliding load floor on top. The kit is universal across drawer system sizes and takes any compatible full-bed-width CargoGlide, or up to two half-bed-width CargoGlides side by side. What arrives is two full-length steel rails rather than a handful of small brackets.
What's Included:
One full-length angled mounting rail
One full-length flat mounting strap
Mounting hardware
Installation manual
Features
Storage Below, Sliding Deck Above The drawer system keeps doing its job underneath while the CargoGlide slides out on top. Heavy and awkward loads come out to the tailgate instead of you crawling in after them.
One Kit, Both Drawer Sizes DECKED sells this as a universal kit for the vX full-size and vY midsize Drawer Systems, so there is no size to get wrong at the drawer end.
One Full-Width or Two Half-Width Mount any compatible full-bed-width CargoGlide, or run up to two half-bed-width CargoGlides side by side if you would rather have two independent slides.
Current Generation, Not Legacy This is the current bracket kit for CargoGlide 2.0. DECKED's Legacy bracket kit is a different part number for the older generation, and DECKED states the Legacy brackets do not work with current CargoGlide models. Do not mix the two.
Full-Length Rails Rather than a set of small brackets, this kit is two bed-length steel members. The load is carried along the whole run of the drawer system rather than at a few isolated points.
Made in the USA Made in the USA and covered by DECKED's limited lifetime warranty.
Fitment & Compatibility
Application
Fit
CargoGlide 2.0 onto a DECKED vX full-size Drawer System
✓ Fits
CargoGlide 2.0 onto a DECKED vY midsize Drawer System
✓ Fits
Legacy CargoGlide onto a Legacy Drawer System
✗ Does not fit, use the Legacy CargoGlide mounting bracket kit
CargoGlide mounted directly into a truck bed with no drawer system
✗ Not required, this kit exists specifically for mounting onto a drawer system
Fit guidance: This is the current-generation kit for CargoGlide 2.0 on a vX or vY Drawer System, and it is universal across those drawer sizes. If your CargoGlide or your drawer system is the older Legacy generation, this is the wrong part: DECKED sells separate Legacy brackets and states the two generations are not compatible.
Specifications
Model: DECKED CargoGlide Mounting Brackets for Drawer System
Part Number: C0090-DCGBK-BLK
Generation: Current, for CargoGlide 2.0
For System: DECKED vX (full-size) and vY (midsize) Drawer Systems
Kit Contents: One full-length angled rail, one full-length flat strap, mounting hardware
CargoGlide Capacity: One full-bed-width CargoGlide, or up to two half-bed-width CargoGlides
Supported CargoGlide Models: CargoGlide 600 and 1500, 75% extension, per the DECKED install manual
Color: Black
Shipping Weight: 16 lb
Shipping Carton: 55" x 8" x 3"
Country of Origin: Made in the USA
UPC: 815294025000
Installation
Type: Bolt-on rail kit, CargoGlide onto a DECKED Drawer System · Time: About 60-90 minutes · Tools: Socket set and a ratchet; a second pair of hands to lift the CargoGlide onto the rails · Difficulty: Moderate
The rails fasten along the drawer system, then the CargoGlide bolts down to them. The install manual in the Resources tab covers the CargoGlide 600 and 1500 with 75% extension.
Watch the model-specific installation walkthrough:
Resources
Everything you need for your DECKED CargoGlide Mounting Brackets for Drawer System, CargoGlide 2.0 to vX and vY Drawers, Black, in one place.
Warranty. DECKED covers this part under its Limited Lifetime Warranty, the one the company calls its No BS Warranty: the original purchaser is covered against defects in material and workmanship for the expected lifetime of the product, and DECKED chooses between repair, replacement, refund or credit. Registration is offered but is not a condition of coverage. The warranty does not cover a product installed outside its intended fitment, so confirm which DECKED system you own before ordering.
Free shipping. This item ships free to the lower 48 states and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect your order on arrival. If anything is damaged or missing, contact us right away and we will make it right.
About DECKED
DECKED started in 2014 with a drawer system sketched on a bar napkin in Ketchum, Idaho, where the company is still headquartered. The idea was simple and stubborn: truck storage should be organized, weatherproof and built to outlive the truck. Today DECKED builds its drawer systems, the Tool Box, CargoGlide and the D-co case ecosystem in a 365,000 square foot plant in Defiance, Ohio, with around 234 employees, and its gear rides in more than 400,000 trucks backed by over 26,000 five-star reviews.
Everything DECKED makes is made in the USA and covered by a limited lifetime warranty the company plainly calls its No BS Warranty. Prestige Truck is an authorized DECKED dealer. every part we ship is a genuine DECKED component that arrives with full manufacturer warranty coverage and the correct hardware in the box.
Installing A CargoGlide 1500 On Drawer Systems
The full-bed-width option, start to finish, on a drawer system rather than a bare bed.
Worth watching if you are deciding between one full-width slide and two half-width slides, because the install differs and so does what you can carry.
Installing A CargoGlide 600 On Your Drawers
The half-bed-width version going onto a drawer system, which is the setup to watch if you plan to run two side by side.
It also shows how much of the deck stays usable once the slide is in place.
Frequently Asked Questions
Straight answers on specs, fit and support
Is this the Legacy bracket kit or the current one?
This is the current-generation kit, for CargoGlide 2.0 on a vX or vY Drawer System. DECKED sells a separate Legacy bracket kit for its older generation and states the Legacy brackets are not compatible with the new CargoGlide models. The two are physically different: this kit is two full-length rails, the Legacy kit is six small brackets and spacers.
Do I need a DECKED Drawer System for this?
Yes, and a CargoGlide. This kit is the hardware that joins the two, and neither is included. It exists specifically so a CargoGlide can sit on top of a drawer system instead of bolting into the bed floor.
Does it fit both full-size and midsize drawers?
Yes. DECKED sells this as a universal kit covering both the vX full-size and vY midsize Drawer Systems, so there is no drawer size to select.
How many CargoGlides can I mount on it?
One full-bed-width CargoGlide, or up to two half-bed-width CargoGlides side by side. Two half-width slides give you independent access to each side of the bed; one full-width gives you a single large sliding deck.
Which CargoGlide models does the manual cover?
The DECKED install manual supplied with this kit covers the CargoGlide 600 and CargoGlide 1500 with 75% extension mounted to a Drawer System. That manual is linked in the Resources tab.
Do I lose the use of the drawers underneath?
No. The point of the pairing is that both keep working: the drawers slide out from under the deck as before, and the CargoGlide slides out above them. What you lose is bed height above the deck, so check your clearance if you run a tonneau or a canopy.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
