The Drawerganizer is a molded tray that nests into the handle end of a full-size (vX) DECKED Drawer System drawer, and it is an accessory for that system: it locates on the drawer itself and has nothing to nest into without one. It does not fit a bare truck bed and it is not a standalone toolbox tray.
Its job is the small stuff. A DECKED drawer is long and deep, which is excellent for lumber, rods and power tools and terrible for hex keys, fuses, bug spray and a roll of tape, all of which end up migrating to the far end of the drawer. The Drawerganizer gives that category a home at the end you can actually reach without climbing into the bed.
What's Included:
DECKED Drawerganizer tray in gray
Molded stepped compartments, no assembly required
Features
Stops the Small-Parts Migration A long drawer sends anything light and loose to the back on the first hard stop. The Drawerganizer captures small tools, hardware and consumables at the handle end where you can see and reach them.
Nests at the End You Reach First It seats into the handle end of the drawer, which is the section that clears the tailgate first when you pull the drawer out. Nothing about it requires you to climb into the bed.
Molded Stepped Compartments The tray is one molded piece with stepped-depth sections rather than a flat bin, so short items sit high enough to grab and taller items get a deeper pocket.
Lifts Out Clean It is a drop-in tray, not a fixture. Lift it out to carry the small parts to the job, or to tip out the sawdust that always collects in the bottom.
Sized for the Full-Size Drawer This tray is cut for the full-size (vX) drawer footprint. It is not the Double Drawerganizer, which is the larger version with a carry handle.
Made in the USA Made in the USA and covered by DECKED's limited lifetime warranty.
Fitment & Compatibility
Application
Fit
DECKED Drawer System, full-size (vX) drawers
✓ Fits
DECKED Drawer System, midsize (vY) drawers
✗ Not the intended fit, this tray is cut for the full-size drawer
Bare truck bed with no DECKED Drawer System
✗ Does not fit, this is a drawer insert
DECKED Tool Box
✗ Does not fit
Fit guidance: This tray nests into the handle end of a full-size DECKED drawer. You need the DECKED Drawer System for it to have anywhere to sit. If you want more volume and a grab-and-go handle, look at the Double Drawerganizer instead.
Specifications
Model: DECKED Drawerganizer
Part Number: A0080-DRAW-GRY
Color: Gray
Construction: One-piece molded plastic tray with stepped compartments
Mounts To: Handle end of a full-size (vX) DECKED Drawer System drawer
Carry Handle: No, see the Double Drawerganizer for the version with a handle
Shipping Weight: 4 lb
Shipping Carton: 19" x 11" x 8"
Country of Origin: Made in the USA
UPC: 815294022870
Installation
Type: Drop-in tray, no fasteners · Time: Under 5 minutes · Tools: None · Difficulty: Easy
Open the drawer and seat the tray into the handle end. DECKED does not publish a printed instruction sheet for this part, so this listing has no Resources tab. We do not substitute a neighbouring product's sheet.
Warranty, Shipping & Returns
Warranty. DECKED covers this part under its Limited Lifetime Warranty, the one the company calls its No BS Warranty: the original purchaser is covered against defects in material and workmanship for the expected lifetime of the product, and DECKED chooses between repair, replacement, refund or credit. Registration is offered but is not a condition of coverage. The warranty does not cover a product installed outside its intended fitment, so confirm which DECKED system you own before ordering.
Free shipping. This item ships free to the lower 48 states and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect your order on arrival. If anything is damaged or missing, contact us right away and we will make it right.
About DECKED
DECKED started in 2014 with a drawer system sketched on a bar napkin in Ketchum, Idaho, where the company is still headquartered. The idea was simple and stubborn: truck storage should be organized, weatherproof and built to outlive the truck. Today DECKED builds its drawer systems, the Tool Box, CargoGlide and the D-co case ecosystem in a 365,000 square foot plant in Defiance, Ohio, with around 234 employees, and its gear rides in more than 400,000 trucks backed by over 26,000 five-star reviews.
Everything DECKED makes is made in the USA and covered by a limited lifetime warranty the company plainly calls its No BS Warranty. Prestige Truck is an authorized DECKED dealer. every part we ship is a genuine DECKED component that arrives with full manufacturer warranty coverage and the correct hardware in the box.
Frequently Asked Questions
Straight answers on specs, fit and support
Do I need a DECKED Drawer System to use this?
Yes. The Drawerganizer nests into the handle end of a DECKED Drawer System drawer. It is a drawer insert, not a standalone tool tray, and it has nothing to locate on in a bare truck bed.
Does it fit midsize drawers too?
It is cut for the full-size (vX) drawer. The midsize (vY) system uses a wider mega drawer with a different internal shape, so treat this as a full-size part and check your system before ordering.
What is the difference between this and the Double Drawerganizer?
Size and a handle. The Double Drawerganizer is the larger XL version with a molded grab handle so you can lift the whole thing out and carry it to the job. This standard Drawerganizer is the smaller tray without a handle.
Is it fixed in place or does it lift out?
It lifts straight out. It nests into the drawer so it does not slide around while you drive, but there are no fasteners, so you can pull it out to carry parts or to empty the debris that collects in any truck-bed tray.
What is it actually good for?
The things a long drawer loses: hex keys, fasteners, fuses, tape, zip ties, bug spray, a multi-tool. Anything light enough to slide to the back of a 6 ft drawer the first time you brake hard.
Is there an install manual?
No, and we have not given it one. DECKED publishes no printed instruction sheet for the Drawerganizer, so this listing has no Resources tab rather than borrowing another product's sheet. There is nothing to install: the tray drops in.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
