The BAKBox 2 answers a question every tonneau owner eventually asks: where do the tools go? It is a locking toolbox that mounts at the bulkhead, at the very front of the bed, and lives underneath your tonneau cover rather than fighting it. Tools and valuables get a dry, hidden, lockable home, and the cover still closes over the whole bed. This page is the model hub for the BAKBox 2. Pick your truck below and we will route you to the box sized for your bed width.
The fold-away design is what separates it from a crossbed box. When you need the full length of the bed floor for sheets of plywood or a dirt bike, the whole box folds flat against the bulkhead in a few seconds. Fold it back up and you have the toolbox again. You are not choosing between storage and bed space the way a fixed box makes you choose.
Construction is solid-core FRP composite panels about half an inch thick, which is water-tight and impact resistant rather than a thin plastic shell. There is a sliding tray up top for fasteners, gloves, and small tools, with the deeper space below for longer items. It mounts with clamp-on hardware so nothing gets drilled into your truck, it installs in about twenty minutes, and it comes off just as easily if you sell the truck or want the bed empty for a season.
The BAKBox 2 is designed to work under BAKFlip hard folding covers and the BAK Revolver X2 roll-up. It is sized by bed width, not by year, which is why the part you need depends on your truck rather than on a model year range. Select your vehicle to get the right one.
What's Included:
(1) BAK BAKBox 2 fold-away toolbox
(1) Sliding tray
(1) Clamp-on mounting hardware kit
(1) Installation guide
Features
Folds Away for Full Bed Access The whole box folds flat against the bulkhead in seconds, so you get a locking toolbox when you want it and the full length of your bed floor when you do not. A fixed crossbed box makes you pick one; the BAKBox 2 does not.
Works Under Your BAKFlip or Revolver X2 Cover It is built to mount beneath BAKFlip hard folding covers and the Revolver X2 roll-up, at the bulkhead where the cover does not need the space. Your tools get a second layer of protection and your tonneau still covers and locks the entire bed.
Solid-Core FRP, Water-Tight and Impact Resistant The panels are solid-core FRP composite about half an inch thick. That is a structural material rather than a thin plastic shell, so the box shrugs off impacts, keeps water out, and does not flex when it is loaded.
No-Drill Clamp-On Install Sturdy clamp-on mounting means nothing gets drilled into your truck. It goes in at the bulkhead in about twenty minutes with basic hand tools, and it comes back out just as cleanly when you want the bed empty.
Sliding Tray for the Small Stuff The included sliding tray keeps fasteners, gloves, sockets, and tape sorted at the top of the box while longer tools and gear stow underneath. It slides side to side so you can reach either end from whichever side of the bed you are standing on.
Sized to Your Bed, Not to a Model Year Each BAKBox 2 part number is built to a specific bed width, which is why the selector asks for your truck rather than a year range. The box is roughly 10" by 10" by the width of your bed, so it spans the bulkhead cleanly with no gaps at the sides.
Fitment & Compatibility
Find your truck. The BAKBox 2 is a bulkhead accessory sized by bed width and built to mount under a BAKFlip hard folding cover or a BAK Revolver X2. We stock 8 versions. Select your truck to see the one sized for your bed and its price.
Select your year, make, model and bed above to see the exact cover for your truck, its price, and a confirmed fit.
Specifications
Type: BAKBox 2 fold-away tonneau toolbox, mounts at the bulkhead
Cover Compatibility: Works under BAKFlip hard folding covers and the BAK Revolver X2
Panels: Solid-core FRP composite, about 1/2" thick, water-tight and impact resistant
Box Dimensions: About 10" x 10" x bed width; the exact width is set by your truck
Access: Folds flat against the bulkhead for full bed access
Organization: Includes a sliding tray for small items
Mounting: No-drill clamp-on install
Install Time: About 20 minutes
Warranty: 1-year limited
Installation
Type: No-drill clamp-on at the bulkhead · Time: About 20 minutes · Tools: Basic hand tools · Difficulty: Easy, one person
Every BAKBox 2 installs the same way regardless of truck. Set the box against the bulkhead at the front of the bed, clamp it down with the included hardware, and it is ready to load or fold away. Nothing gets drilled into the truck. If you are fitting it under an existing cover, open or roll the cover forward first so you can reach the bulkhead cleanly.
Watch the model-specific installation walkthrough:
Warranty, Shipping & Returns
Warranty. 1-Year Limited Warranty from BAK / RealTruck against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About BAK Industries
BAK Industries has engineered premium truck bed covers in the USA for decades and is a flagship tonneau brand of RealTruck, one of the largest truck-accessory manufacturers in North America. Its hard-folding BAKFlip and retractable Revolver lines set the benchmark for the category, pairing heavy-duty aluminum construction with a low-profile, weathertight design.
Every BAK cover is built for real-world truck use: no-drill, clamp-on installation that mounts in about 30 minutes, full bed access when folded or rolled back, and reinforced latching that keeps cargo secure and dry. The lineup runs from the value-focused BAKFlip MX4 and G2, to the flagship FRP-panel F1 and FiberMax, to the industrial Revolver X2 and X4s roll-ups, covering nearly every popular truck and bed length.
Backed by US-based product support and a multi-year manufacturer warranty, a BAK cover is a buy-it-once upgrade that protects tools, cargo, and gear while giving a truck a cleaner, more finished look.
Authorized BAK Industries dealer. Prestige Truck is an authorized dealer of BAK Industries, so every tonneau cover and accessory you buy is 100% genuine and factory-new, covered by the full BAK Industries manufacturer warranty, and backed by our own US-based support team.
Compare The Range
How this compares to similar models
The closest alternatives side by side, so you do not have to keep tabs open.
RealTruck's Fast Facts on the BAKBox 2 fold-away tonneau toolbox, covering how it mounts at the bulkhead and folds flat against the cab to free up the full bed floor.
A quick look at the lockable, water-resistant storage that works underneath a BAKFlip or Revolver cover without permanently giving up bed space.
BAKBox 2 Install On A Ford F-150
Installing the BAKBox 2 in a 2021 Ford F-150 bed, from setting the box at the bulkhead to securing it for use under the cover.
Useful for seeing the no-drill mount on a common application before you fit one yourself.
BAKBox With A Folding Or Roll-Up Cover
A look at how the BAKBox pairs with a BAKFlip folding cover or a Revolver X2 roll-up, sharing the bed at the bulkhead.
Good for confirming that the toolbox and your existing cover work together, and for seeing how much bed length the box actually occupies.
Frequently Asked Questions
Straight answers on specs, fit and support
How do I know which BAKBox 2 fits my truck?
Use the vehicle selector on this page. The BAKBox 2 is sized by bed width rather than by model year, so picking your truck routes you to the part number built to span your bulkhead cleanly. If you are between options, measure the inside width of your bed at the bulkhead and match that.
Which tonneau covers does the BAKBox 2 work with?
It is designed to mount under BAK BAKFlip hard folding covers and the BAK Revolver X2 roll-up. The box sits at the bulkhead where those covers do not need the space, so your tonneau still closes and locks over the full bed with the box underneath it.
Do I need to drill anything to install it?
No. The BAKBox 2 uses a clamp-on mount with the included hardware, so there is no drilling and no cutting into your truck. Most people have it in and loaded in about twenty minutes with basic hand tools, and it comes back out just as cleanly.
Is it weatherproof, and will my tools stay dry?
The solid-core FRP composite panels are water-tight and impact resistant, and with a tonneau cover closed over the top the box gets a second layer of protection. Like any bed accessory it is water-resistant in normal use rather than submersible, so treat a pressure washer aimed at the seams with some caution.
Can I still use the full length of my bed?
Yes, that is the whole point of the fold-away design. When you need the entire bed floor for long or bulky cargo, the box folds flat against the bulkhead in a few seconds, then folds back up when you want the toolbox again.
How is the BAKBox 2 different from a regular crossbed toolbox?
Three ways. It folds flat instead of permanently occupying bed length. It mounts under a tonneau cover instead of forcing you to cut or forgo one. And it clamps on with no drilling instead of bolting through your bed rails. The trade-off is capacity: a crossbed box holds more, a BAKBox 2 gives the space back when you need it.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
BAKBox 2 Fold-Away Truck Bed Toolbox
UWS 36" Truck Side Tool Box, Bright Aluminum (EC30071)
UWS 36" Aluminum Foot Locker Truck Tool Box, Bright Aluminum (EC20061)
UWS 34" Dog Box Accessory Chest, Bright Aluminum, 3.4ft³ (TCB-34)
