The DECKED Tool Box is a full-size crossbed truck tool box molded from glass-fiber reinforced SMC composite, which is how it gets steel-like strength without steel's two failure modes: it does not dent and it cannot rust. This DTB2T22-BLK is the black Tundra version: the same 71.7" box as the standard model, supplied with the stainless brackets that bolt into the factory bed utility tracks on a 2022 and newer Toyota Tundra instead of clamping to the bed rails.
The lid carries a 300 lb payload rating and opens with one hand on gas struts; the tub is rated to 800 lb of cargo across 288 L of internal volume. Integrated gaskets and molded drainage channels seal the interior against rain, snow and the car wash, and UV inhibitors keep the black finish from chalking in the sun. A stainless armored locking system with two keys secures the lot. It is built in Defiance, Ohio, and covered by DECKED's limited lifetime warranty. Because it mounts to the Tundra's track system, this part is for the 2022 and newer Tundra only.
What's Included:
DECKED Tool Box in black, fully assembled
Stainless steel Tundra brackets with hex bolts and zinc washers for the factory bed utility tracks
Integrated armored locking system with two keys
Gas strut lid assist, factory installed
Driver-side and passenger-side tub tie-down points
Features
Built for the 2022+ Tundra Track System This version ships with stainless steel brackets that anchor into the utility side rail tracks on a 2022 and newer Toyota Tundra, so the box bolts to the truck's own accessory system rather than clamping across the bed rails.
No Rust, Dents or Fading The tub and lid are compression-molded from glass-fiber reinforced SMC composite. It shrugs off the impacts that dent diamond-plate aluminum, it cannot corrode, and UV inhibitors in the resin keep the black finish from fading.
300 lb Lid, 800 lb Tub The lid is rated to carry 300 lb, so cargo can ride on top of the box, and the tub carries 800 lb of tools and gear inside its 288 L capacity.
Fully Weatherproof Integrated lid gaskets seal against rain, snow and pressure washing, and molded drainage channels route water away from the hinges instead of into your tools.
One-Hand Opening Gas struts lift the lid with one hand and hold it open while you dig with both. No propping, no slamming.
Made in the USA Molded, assembled and tested at DECKED's plant in Defiance, Ohio, with American-made stainless brackets, and covered by DECKED's limited lifetime warranty.
Fitment & Compatibility
Application
Fit
Toyota Tundra 2022 and newer with the factory bed utility side rail tracks
✓ Fits
Toyota Tundra 2022 and newer without the side rail tracks
✗ Does not fit
Toyota Tundra 2021 and older
● Use the standard DTB2 version instead
Any non-Tundra truck (these need the standard DTB2 where they fit; note the standard box does not fit the Nissan Titan)
✗ Does not fit, use the standard DTB2 version
Fit guidance: This is the Tundra bracket version of the Tool Box, and its fitment works the opposite way round to the standard box: it mounts to the utility tracks Toyota builds into the 2022 and newer Tundra bed, so it fits that truck and nothing else. A 2022+ Tundra that was not built with the side rail tracks cannot take it either. For every other full-size truck, including the 2021 and older Tundra, order the standard DTB2 version, which clamps to bed rails measuring 61.375" to 70.5" across.
Specifications
Model: DECKED Tool Box, 2022+ Toyota Tundra crossbed
Part Number: DTB2T22-BLK
Color: Black
Vehicle Fit: Toyota Tundra 2022 and newer with the factory bed utility side rail tracks
Mounting: Stainless steel brackets into the Tundra bed utility tracks (Toyota calls it the Deck Rail System)
Construction: Glass-fiber reinforced polyester SMC (tub and lid); 30% glass-filled polypropylene buttons; anti-corrosion treated steel and aluminum hardware
Lid Payload: 300 lb
Tub Payload: 800 lb
External Dimensions: 71.7" L x 25.5" W x 16" H
Internal Dimensions: 59.9" L x 21.4" W x 13.4" D
Storage Volume: 288 L
Product Weight: 106 lb
Shipping Weight: 140 lb
UPC: 815294026960
Installation
Type: Bolt-in to the factory Tundra bed utility tracks, no drilling · Time: About 30-45 minutes · Tools: Socket set and torque wrench; a second pair of hands to lift the 106 lb box into the bed · Difficulty: Easy
Follow the Tundra-specific install manual linked below, not the standard Tool Box sheet: the four stainless brackets slide into the bed utility tracks and bolt up from there. Gooseneck and fifth-wheel users: check for at least 24" of depth clearance before ordering.
Watch the installation walkthrough:
Resources
Everything you need for your DECKED Tool Box, 2022+ Toyota Tundra Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black, in one place.
Warranty. DECKED covers the Tool Box with its Limited Lifetime Warranty, which the company calls the No BS Warranty: the original purchaser is covered against defects in material and workmanship for the expected lifetime of the product, with DECKED choosing repair, replacement, refund or credit. Registration is offered but is not required for coverage. Note that installing the box in a vehicle outside its intended fitment voids the coverage, which on this Tundra-specific part means fitting it to anything other than a 2022 or newer Tundra with the factory bed tracks.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About DECKED
DECKED started in 2014 with a drawer system sketched on a bar napkin in Ketchum, Idaho, where the company is still headquartered. The idea was simple and stubborn: truck storage should be organized, weatherproof and built to outlive the truck. Today DECKED builds its drawer systems, the Tool Box, CargoGlide and the D-co case ecosystem in a 365,000 square foot plant in Defiance, Ohio, with around 234 employees, and its gear rides in more than 400,000 trucks backed by over 26,000 five-star reviews.
Everything DECKED makes is made in the USA and covered by a limited lifetime warranty the company plainly calls its No BS Warranty. Prestige Truck is an authorized DECKED dealer. every Tool Box we ship is a genuine current-generation DECKED product with full manufacturer warranty coverage.
Compare The Range
How this compares to similar models
The closest alternatives side by side, so you do not have to keep tabs open.
Model
This OneDECKED Tool Box, 2022+ Toyota Tundra Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2T22-BLK)
DECKED shows the gas-strut lid opening and holding itself up with no hands, so you can dig for tools with both.
Filmed on the current SMC Tool Box, it is the two-second demo of the strut assist you feel every time you open the box.
How Much Can The Tool Box Handle
DECKED loads the lid and tub to their ratings and beyond, showing where the 300 lb lid and 800 lb tub numbers come from.
Watch it before you decide whether cargo can ride on top of the box on your next haul, because the answer is yes.
The Tool Box Up Close
A close walk-around of the current-generation SMC Tool Box: the molded tub, gasketed lid, armored locks and drainage detail.
Watch it to see the exact box this listing sells, filmed by DECKED after the SMC redesign.
Frequently Asked Questions
Straight answers on specs, fit and support
Which trucks does DTB2T22-BLK fit?
Only the Toyota Tundra, 2022 and newer, and only if your bed was built with the factory utility side rail tracks. This black Tundra version ships with stainless brackets that bolt into those tracks. It does not fit a 2022 or newer Tundra without the tracks, it does not fit a 2021 or older Tundra, and it does not fit any other make of truck.
How do I tell whether my Tundra has the bed utility tracks?
Look along the top inside edge of each bed side wall. Trucks with the system have a slotted rail running most of the bed length with sliding cleats or tie-down pucks in it, which Toyota markets as the Deck Rail System. If your bed walls are smooth along that edge with only fixed corner hooks, your truck does not have the tracks and this version will not mount.
My truck is not a 2022 or newer Tundra. What do I order instead?
Order the standard DTB2 version. It is the same box in the same three colors and it clamps across the bed rails of nearly every full-size truck built from 2001 to today, provided the inside distance between the bed rails measures 61.375" to 70.5". The two versions differ only in how they attach to the truck.
Is it actually weatherproof?
Yes. Integrated lid gaskets seal the tub against rain, snow and car washes, and molded drainage channels route water away from the hinges. DECKED's own soak test is embedded on this page so you can see the result rather than take the claim on faith.
How much weight can it carry?
The lid is rated to 300 lb and the tub to 800 lb, with 288 L of internal volume. That means cargo can ride on the closed lid while the tub is loaded, within your Tundra's own payload rating.
Is this the current DECKED Tool Box or the older Legacy box?
This is the current-generation SMC Tool Box with the 300 lb lid and 800 lb tub ratings. It is a different product from DECKED's earlier Legacy Tool Box, and Legacy accessories such as the Legacy snack tray and Legacy ladder do not fit it.
What our customers say
4.6 · 40 reviews
BOBBIE M.
Verified
06/08/2026
I couldn't be happier with
I couldn't be happier with my DECKED Truck Box. From the very beginning, the entire experience was outstanding. The ordering process was simple and hassle-free, the product shipped quickly, arrived exactly when promised, and the installation was an absolute breeze. The truck box has more than enough room to organize and securely store everything I need while keeping my truck bed clean and functional. One of my favorite features is that it's made from an incredibly heavy-duty polymer instead of metal, so I never have to worry about dents, rust, or everyday abuse. It's exceptionally strong and clearly built to withstand years of hard use. Beyond its functionality, the design is sleek and fits my truck perfectlyit actually enhances the overall appearance of the vehicle rather than looking like an aftermarket add-on. The quality, durability, and attention to detail are evident from the momen
Travis P.
Verified
03/15/2026
Awesome Toolbox
Absolutely love it. Lid doesn't flex when closing. Lock and push pad work smoothly. Included rubber mounting pads make it rock solid and inside liners over the mounting hardware really show how much though went into this box. Awesome to be able to position the Halfrack 32 so I can access it without getting in the bed. I have all the emergency roadside gear stored in the Halfrack and really like that I can get to it easily. Overall, this is definitely the best toolbox I have owned. There is one thing that I would change to keep the Halfrack in position (it tends to slide around when cornering) but still easy to slide out of the way to access the space below. I am 3D printing a small tab to mount on the Halfrack handle so that it applies a gentle lateral pressure on the box and locks it in place. Also, please add pictures of the Sixer 16 sitting in the box. When ordering, I thought it sat
John E.
Verified
08/24/2025
Good quality and good looking
Good quality and good looking tool box Works great very sturdy
Michael D.
Verified
05/08/2026
Quality durable products. One and
Quality durable products. One and done. You wont wish you went with the other brand.
Shay H.
Verified
08/16/2025
Best Toolbox Ever
Best tool box a man or woman can buy. My husband and I set it up together and was so easy and looks amazing. Also the instructions and the terms and conditions gave us a good laugh. Definitely will buy from here again
Jordan S.
Verified
05/10/2025
Badass!
I was going to purchase another Weatherguard, but decided to go with the Decked Instead and I am glad I did so far! Time will tell but I believe this is the tool box to have!
Joshua P.
Verified
04/07/2025
Unmatched!
This toolbox is literally unlike any other truck toolbox. Its super durable! Very easy to open! Simple install for my Tundra. Absolutely LOVE
Sterling G.
Verified
07/24/2026
Missing parts
Good product so far but showed up without install kit or instructions. Might be a good idea to put d-rings on before actually setting the tool box in the bed.
Nathanial B.
Verified
08/07/2022
Nice saddle box. Easy to
Nice saddle box. Easy to install. Love the accessories.
Clark B.
Verified
02/23/2022
Tool Box - 2020 Chevy 3500
For the most part an awesome product. There are two minor things that I have to mention. The first one is that the lid does not completely close from one side of the vehicle unless you really slam it down (even that doesn't work all the time). You have to make sure each side latches by either being in the bed of the truck to push on both sides or closing from one side and then walking around to the other to make sure it latches. I tested this before and after the installation and it was the same installed as it was sitting on the garage floor. The second item is the D-Box compatibility. The one they include with the tool box is great and I have no issues with that. The problem is they advertise that if you don't get the ladder, you can fit another D-Box. This is true but there is not a good place for it to go. The included D-Box has 4 lugs to sit on and provide a stable location. The add
Mark K.
Verified
06/23/2026
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
Joseph A.
Verified
06/15/2026
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
David C.
Verified
06/11/2026
Great tool box! Very well
Great tool box! Very well built, was easy to install and it works flawlessly.
Javier H.
Verified
07/17/2026
Jackery and tools
I have tools, 5 gallon bucket and my Jackery.
BRENNAN B.
Verified
05/14/2026
Must have box
Love the Decked box. Easy access from either side with an elbow or simple one hand touch. Has plenty of room. I work for a roofing company and use my truck to haul materials and dumpsters and I keep all the extra materials in my box. Keeps everything dry, secured and organized. Installation was easy.
Steve S.
Verified
05/02/2026
I got the new deck
I got the new deck toolbox for my 2020 Chevrolet 3500 long bed and absolutely love. It looks great in the truck, very well built, strong& sturdy tons of space easy to install just all around great product. Plus, you cant beat American built. Im a decked customer for life now.
Rick A.
Verified
03/19/2026
OUTSTANDING PRODUCTS
i was a little worried about ordering a composite tool box without seeing it in person first. Product arrived and will have to say i was extremely surprised in the quality and durability. Took me most of the afternoon to install by myself but well worth it. Ordered the tool box and cargo glide with a couple of six packers and a half rack. Loaded up and ready to go. YOU WILL NOT BE DISAPPOINTED IN DECKED PRODUCTS
Tracy
Verified
05/17/2026
BDS
I would definitely want a system !
Rick P.
Verified
03/15/2026
We definitely recommend, great looking
We definitely recommend, great looking add on to my truck. Fits all my needs for work and play. Keeps things dry. Thank you
Mark I.
Verified
03/12/2026
Way Better Than I Imagined
Having the 2nd gen drawer system previously this was a no-brainer. The build quality of Decked storage systems is second to none. This box is built like a brick shithouse and has worked out perfectly for my job. Capacity, ease of use, and security plus customer service that has been amazing in my experience with them.
Tim B.
Verified
11/10/2025
Awesome toolbox
Love it! Wish it would have come with an extra toolbox tray. You can tell the solid built construction and attention to detail. Makes my truck look better and upgraded. Definitely helped me clear out my back seat! I still haven't got it completely filled with the tools that need to go in it, but I will without a doubt just need an extra tray for hand tools. Great product and I would highly recommend DECKED to anyone.
clay m.
Verified
05/01/2026
Tool box on 2022. Issac titan XD Pro 4x.
The product installed easily and quickly on my Nissan Titan XD. I had to remove the section of Utilitrack on the bed sides closest to the cab. The Decked customer service is a an absolutely top notch. Any concern I had, they addressed . It was a pleasure to do business with them
virginia D.
Verified
07/10/2025
Love it. Great quality
Love it. Great quality
Joel L.
Verified
06/16/2025
Decked Toolbox
The Decked toolbox is a great addition to any truck! I use the D-boxes and Cross boxes from my legacy drawer system in another truck to easily transfer tools and equipment between trucks.
James D.
Verified
05/18/2025
Pack the box
Can never have enough tools to carry around with you.
KYLE C.
Verified
05/03/2026
Great material and function. Installation
Great material and function. Installation was easy but definitely use two people. I tried on my own and it was a PITA, So I ended up getting help. From day 1, when I press the "open" button it will not open on its own, I need to push the lid up to get it started. Sort of annoying when my hands are full.
Brent R.
Verified
03/21/2025
Awesome Customer service and Amazing product
I'm on my second Deck Drawer system and this company's customer service is on point. Thank you Deck Team, (Leandro)! I'll be back for #3 someday.
Bradley M.
Verified
02/22/2025
Decked is nice
I looked at every truck toolbox known to man & nothing compares to the Decked line. I was my truck quite often, its completely waterproof. The price is right inline with other brands but you get quality. Awesome company with awesome products! Thanks Decked
Philip B.
Verified
01/13/2025
Always DECKED out
Only toolbox we use for our work trucks! Handles everyday workout from employees. Made in USA!
Nathaniel
Verified
12/26/2025
Toolbox
Really good truck toolbox. The only thing I dislike is youre not able to install a bed cover with this box. Like other boxes youre able to still install a cover. Would be awesome if decked would come out with a cover that is compatible with this toolbox.
david m.
Verified
11/12/2024
My truck toolbox
I love the toolbox great quality and it was delivered very fast I would recommend it to everyone. I wish I knew about this box way before now I would have brought it a lot sooner
Guy T.
Verified
10/29/2024
Decked Toolbox
What a box! Looks great, is a tough box, lots of room, serves my needs! Will recommend to anyone needing a toolbox!
Matt Y.
Verified
08/04/2024
Best Truck Toolbox Ever Made!!
Not only does the truck toolbox hold everything I could possibly need it is extremely waterproof! I mean nothing that you put inside this toolbox will get wet! Seriously it actually keeps your tools and whatever else nice and dry inside. It looks great as well. No more rusty truck beds and damage to your truck if you ever remove it. Definitely recommend it to anyone looking for a truck toolbox that is actually weatherproof.
Kevin H.
Verified
10/23/2025
Tool box is pretty ok.
The box may not rust but it will corrode. The lock will freeze and then its up to the trusty drill and screw driver to gain access to the goodies inside. Of course the no longer having a lock but having broken parts stuck inside the place where a lock goes takes stars away. Better materials would most likely help.
Luis A.
Verified
02/24/2026
Great box quality item hard lock to open.
Easy to install, spacious interiors, low profile, good look, well made. Only issue hard to open basically have to palm punch the lock to release lid. That gets annoying. Might be my box only. I was hoping Ill loosen up after a while but not the case. I will recommend this box. Looks great when you are trying to keep your truck simple and slick looking.
Tyler U.
Verified
07/27/2025
Best damn toolbox
I had this toolbox on three different trucks now. I got to say it nice and light to switch from truck to truck. And no rust is nice. Nice and big. I have never had a problem with it even in Minnesota winters. Only issue is the handle get bad after a year. I am on my second set of handle and I am about do for another set. Once the handles start to peel the protective coating off the button stick. Some day I like to try the drawer set up.
William A.
Verified
07/08/2024
No need for the ladder.
I purchased about two years ago with the side ladder (passenger side) and found that I only used it twice so I removed it. I do like the box but found when removing the box, the box had cracked on the ladder side. I repaired the crack and reinforced the body at the crack with a couple of tie straps (metal) so it wouldn't fail again. Not sure why the box cracked but I think it was due to the ladder. The box is nice and I would purchase again but minus the ladder. It functions well and I have never had anything get damaged due to getting wet, locks well and has plenty of storage for all I need even carry a box of Def. I now have a bracket for 2 propane tanks and 2 gas cans secured to the box (no weight carry stress on the box) as all sit in bed of the truck.
Robert J.
Verified
05/04/2023
Works great with a tonneau cover
Seems reasonably sturdy, will built, low profile, and generally a good look. It only took a few moments to engineer a piece of angle aluminum and some expanding foam weather stripping, to create a ledge for a short tonneau cover to connect to. The Decked website talks about this, but reads like chatGPT on acid. You can ignore that, it's totally doable, and easy.
Michael B.
Verified
11/06/2022
The construction is grate. the
The construction is grate. the ribs that stick up on the inside bottom are different. Hands on construction though.
Colter L.
Verified
07/23/2022
Aesthetically Pleasing and Unique
My decked tool box is awesome. It is easy to open and close with hinges doing the work for you. The d box and snack tray that came with it are my favorite features. Allowing for handy access to chosen items. My only issue is if shut from side by using a handle the other side may not latch and properly lock. The tool box still cannot be opened because one side is still locked holding it shut. I just found that shutting it firmly is required to get both sides to latch. Honestly this tool box is a 4.8/5 because of that issue. Just cannot give it a five because that means it's perfect and it's not.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
