Retrax PowertraxPRO MX Electric Retractable Tonneau Cover for 2009-2026 Ram 1500 / 1500 Classic / 2500 / 3500 (6'4" Bed, without RamBox)

The Retrax PowertraxPRO MX is an electric retractable tonneau cover built from double-walled aluminum slats in a matte black powder coat finish. Press one of the two key fobs in the box and a motor draws the slats along the bed rail tracks into a canister that clears the bed rail line, and it stops and locks wherever you release it. Closed, the deck holds up to 500 lb spread evenly across it. Drain tubes handle rain and the rollers run on sealed ball bearings that never need lubrication. A built-in bed light switches itself off after you close up. It suits an owner who wants a hard lockable cover run by remote. Part number 90232 is the 6'4" bed application for the 2009-2026 Ram 1500 / 1500 Classic / 2500 / 3500, without RamBox.

What's Included:

• PowertraxPRO MX electric retractable cover with canister
• Clamp-on side rails
• Two remote key fobs
• Drain tubes
• Clamp and mounting hardware kit
• Printed installation instructions

Features

Opens From the Key Fob
Two remote key fobs ship with the cover. Press a button and the motor walks the slats along their tracks. There is no handle to grab and nothing to unlatch by hand.

Stop and Lock Anywhere
The cover locks at any point along the tracks, so you can leave a gap for a ladder or a load of lumber instead of choosing between fully open and fully shut.

Double-Walled Aluminum Slats
Every slat is a double-walled aluminum section wearing a matte black powder coat. With the cover shut, the deck is rated for 500 lb as long as the load sits evenly across the slats rather than in one spot.

LED Cargo Light, Auto Shutoff
A cargo light is built into the cover and shuts itself off, so the bed is lit when you open up after dark without leaving a lamp burning. Nothing extra has to be bought or mounted.

Built-In Water Drainage
The cover carries a built-in drainage system that uses drain tubes. Retrax does not call the cover watertight, so anything that has to stay completely dry is better off inside a sealed bin or bag under the slats.

Clamp-On Install, No Drilling
The side rails clamp to your bed rails using the hardware and instructions in the box. Most trucks need no holes drilled. Retrax publishes separate install sheets for RamBox, CarbonPro and other special cases. Every cover is assembled in North Dakota.

Fitment & Compatibility

Specifications

• Cover Type: Electric retractable tonneau cover
• Material: Double-walled aluminum slats
• Finish: Matte black powder coat
• Bed Access: Retracts into a canister at the front; locks at any point along the tracks
• Load Capacity: 500 lb, evenly distributed
• Sealing: Drain tubes route water out of the cover
• Security: Locks in place at any position along the tracks
• Operation: Electric drive, two remote key fobs
• Cargo Light: Built-in LED, shuts off on its own
• Rollers: Sealed ball bearings, no lubrication
• Drilling Required: No on most trucks, clamp-on rails
• Rack Compatible: No T-slot rails; the PowertraxPRO XR adds them
• Fits: 6'4" bed, see fitment table
• Weight: About 123 lb
• Made In: Assembled in North Dakota, USA
• Warranty: 3 years from the date of purchase

Installation

Type: Clamp-on, no drilling on most trucks · Time: Varies by truck, see the install guide · Tools: Included hardware and instructions · Difficulty: Simple clamp-on

The PowertraxPRO MX uses a clamp-on installation with the hardware and printed instructions supplied in the box. The rails clamp on, so most fitments need no drilling. Retrax publishes vehicle-specific sheets for RamBox, CarbonPro, Tundra with tracks, Tacoma, Frontier, Titan, Ranger and Ridgeline trucks, so work from the one that matches your part number. Recheck every clamp after the first week of driving.

Watch the installation walkthrough:

Resources

Everything you need for your Retrax PowertraxPRO MX Electric Retractable Tonneau Cover for 2009-2026 Ram 1500 / 1500 Classic / 2500 / 3500 (6'4" Bed, without RamBox), in one place.

• Official Retrax PowertraxPRO MX Electric Retractable Tonneau Cover for 2009-2026 Ram 1500 / 1500 Classic / 2500 / 3500 (6'4" Bed, without RamBox) installation guide (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.

Warranty, Shipping & Returns

Warranty. Retrax covers the PowertraxPRO MX against defects in materials or workmanship for three years from the date the first owner bought it. The cover is not transferable to a later owner and proof of purchase may be required. Excluded are damage from an accident, neglect, unexpected use, improper installation or improper servicing, plus any cover cleaned with strong chemicals, lubricated on its rails or bearings, driven with loose cargo or towed from the rear while fitted. Approved claims are repaired or replaced at the manufacturer's option once a return material authorization number has been issued, and shipping charges apply.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight or oversized parcel and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

About Retrax

Retrax makes retractable tonneau covers for pickup trucks. Its covers are assembled in North Dakota and listed as made in America. Rather than folding panels or a rolling soft tarp, a Retrax cover runs rigid slats along tracks on the bed rails and gathers them into a canister at the front.

Retrax also sells the PowertraxPRO XR and the Retrax EQ. Both are electric retractable covers that add T-slot rails on top for racks and accessories. The PowertraxPRO MX skips those rails and pairs double-walled aluminum slats with remote key fob operation in a matte black powder coat finish.

Retrax keeps care requirements simple. The rollers turn on sealed ball bearings that must never be lubricated. The finish needs nothing more than mild automotive soap and water. Owners are asked to recheck the clamps after the first week of driving. Each cover is backed by a limited warranty handled through a return authorization process.