Not every mounting point is a tube. The ARMP is ARB's pedestal mount kit for Intensity lights, giving you a rigid platform where you have a flat surface to bolt to rather than a bar to clamp around.
Mount stability is not a cosmetic concern with driving lights. A light that oscillates on corrugations has a beam that wanders, and the vibration works back into the light body and whatever it is bolted to. ARB built this kit from the same corrosion-resistant stainless hardware as its clamp kits, and it comes with everything needed to do the job once.
What's Included:
Pedestal mount brackets
Mounting plates and spacers
Stainless steel bolts, washers and lock nuts
Security nuts
Features
Flat Surface Mounting For bumpers, pans and rack platforms where there is no tube to clamp around. Gives Intensity lights a rigid, properly engineered base rather than a bracket bent to fit.
Built For Beam Stability ARB designs its mounting hardware for stability first: less oscillation means the beam stays where you aimed it and less vibration is fed back into the light and the bar.
Corrosion Resistant Hardware Stainless steel fasteners throughout, which matters on a part that lives at the front of the vehicle in salt, mud and water.
Complete Kit All the hardware needed is in the box, including security nuts, so there is no trip to the hardware store partway through the job.
Integrates With The Intensity Range Designed alongside ARB's lights rather than adapted to them, so the geometry puts the light where the mounting system expects it.
Genuine ARB Part Carries ARB's published 3-year warranty term for this part.
Fitment & Compatibility
Application
Fit
Flat surfaces: bumpers, bar pans, rack platforms
✓ Fits
ARB Intensity driving lights and Intensity light bars
✓ Fits
Tubular bars
● Use a clamp kit instead: ARM476, ARM603 or ARM761 by tube diameter
Fit guidance: A universal-fit mounting kit rather than a vehicle-specific part. The requirement is a flat surface with enough material behind it to carry the load of a driving light on corrugations.
Specifications
Model: ARB Intensity pedestal mount kit
Part Number: ARMP
Mounting Type: Pedestal, flat surface
Fits: ARB Intensity driving lights and Intensity light bars
Straightforward bolt-on, but make sure there is enough material behind the mounting surface to carry a driving light over corrugations. Fit the light, aim it, then torque everything down.
Resources
Everything you need for your ARB Intensity Light Bar Pedestal Mount Kit, Flat Surface Mounting, Stainless Hardware, in one place.
Warranty. ARB covers the ARMP under a 3-year warranty term, the term ARB publishes for this part. In North America it is administered by ARB (Air Locker Inc., Auburn, WA) and honored through authorized dealers like us. We describe ARB's warranty exactly as ARB publishes it and do not extend or restate its terms.
Free shipping. This item ships free to the lower 48 states and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect your order on arrival. If anything is damaged or missing, contact us right away and we will make it right.
About ARB
ARB began in 1975 when Tony Brown came back from a Cape York trip convinced that the gear sold for Australian four wheel drives was not tough enough, and started hand building roof racks and bull bars in his Melbourne driveway. Fifty years on, ARB is the largest manufacturer and distributor of 4x4 accessories in the southern hemisphere, with an engineering campus at Kilsyth in Victoria, offices in the USA, Europe and the Middle East, and an export network reaching more than 100 countries. Its driving lights are developed in that same engineering culture, tested against the corrugations, dust and water crossings that break lesser gear.
In North America ARB trades as Air Locker Inc. from Auburn, Washington, and backs its products with a US warranty program administered there. Prestige Truck is an authorized ARB dealer. Every light, loom and bracket we ship is genuine US market stock with full ARB North America warranty support behind it.
Night Driving Technique
ARB on how to actually use auxiliary lighting at night: beam selection, aiming, and reading the road ahead at speed.
Worth watching before you aim a new set of lights for the first time.
The ARB Story
How a Melbourne driveway operation building bull bars for outback tourers in 1975 became the southern hemisphere's biggest 4x4 accessories maker.
Seven minutes on the company behind this product, filmed by ARB across its Australian factories and proving grounds.
Frequently Asked Questions
Straight answers on specs, fit and support
When do I need a pedestal mount instead of a clamp?
When there is no tube to clamp around. If you are mounting to a bumper face, a bar pan, a rack platform or any flat panel, the pedestal kit is the right part. If you have tubular bar, use one of the three ARM clamp kits sized to your tube diameter instead.
Which lights does it fit?
ARB lists it for the Intensity driving light and Intensity light bar range. The mounting interface is common across those lights, so the question is the mounting surface rather than which light you have.
Is the hardware included?
Yes, the kit is complete. Stainless steel fasteners, spacer and washers are all supplied, so the only tool you need is a socket set and ideally a torque wrench.
Why does mount stiffness matter?
A light that oscillates on a soft mount has a beam that wanders exactly when you need it steady, and the repeated movement works vibration back into the light body and the bar it is bolted to. ARB engineers the mounting system for stability rather than treating it as an afterthought bracket.
Will the stainless hardware corrode?
Stainless is the right choice for a part living at the front of the vehicle in road salt and mud, and it is what ARB specifies throughout this kit. Nothing is immune forever, but this is the appropriate material for the job.
What is the warranty?
ARB publishes a 3-year term for this part, administered in North America by ARB out of Auburn, Washington, and honored through authorized dealers like us.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
