The S8 20" Bumper Light Bar Kit mounts Baja Designs LED lighting on the front bumper of this vehicle, low enough to keep glare off the hood and close to the ground ahead. Brackets made for this vehicle's bumper hold the lights solidly in place. Lights and brackets come matched in one kit, so the lights land where the bumper was designed to take them. This kit is Baja Designs part 448016 for the 2019-2024 Ram 1500.
Anything a kit needs beyond the box, such as a specific factory bumper or a wiring version, is listed in that kit's fit notes.
Features
No glare off the hood
Mounting lights on the bumper keeps the beam below the hood line, so no light reflects back at the driver.
Brackets made for this bumper
The mounts are shaped for this vehicle's front bumper, keeping the lights tucked into the bumper lines rather than sticking out on a universal bar.
Baja Designs LED lights included
Each kit comes with Baja Designs LED lights or light bars. The series, count and beam pattern for this product are shown in the options and spec table.
Lens patterns sorted by zone
Baja Designs organizes its lens patterns by lighting zone, from wide cornering light to long-range spot, so a setup can be tuned to your speed and terrain.
Sealed against weather and dust
Baja Designs LED lights use sealed housings and hard lenses built for rain, mud, dust and stones thrown up from the road.
Lifetime limited warranty on lights
The lights carry the Baja Designs limited lifetime warranty for recreational use, and brackets and harnesses carry their maker's pass-through warranty.
Fitment & Compatibility
Fit guidance: Fits: 2019-2024 Ram 1500, with the qualifiers shown. Check your vehicle against these notes before ordering.
Qualifier: Rebel
Specifications
-
Brand: Baja Designs
-
Warranty: Limited lifetime on Baja Designs lights for recreational use (capped at 49,930 hours); brackets, harnesses and switches Baja Designs resells carry their maker's warranty
-
Mount location: Front bumper
-
Fitment: Vehicle specific (see Fitment & Compatibility)
-
Road use: Baja Designs notes that some of its lights may only be used off-road. Check the lighting laws where you drive before using this light on public roads.
-
Light type: Bumper Light Kit
-
Beam pattern: Driving/Combo
-
Lens Color: Clear
-
Light size: 20 in
-
Color temperature: 5000K
-
Brightness: 12,700 lumens
-
Water resistance: IP69K
-
Power draw: 120 W
-
Current draw: 8 A
-
Part number: 448016
California Proposition 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Installation
The kit mounts to this vehicle's front bumper on brackets made for it. Route the harness through the engine bay to the switch the kit uses, then aim the lights on level ground. The fit notes below list the bumper the kit requires, any wiring choice and any modification.
Follow the fit notes and the included instructions; our team can answer installation questions before you order.
Resources
An installation guide for this product is not available to download. Our team can answer installation questions before you order; contact us with the part number.
Warranty, Shipping & Returns
Warranty. Baja Designs warranties cover defects in design and manufacturing only, and the term depends on the product type. LED light bars and auxiliary lights for recreational use carry a limited lifetime warranty capped at 49,930 hours of operation. Brackets, wiring harnesses and switches that Baja Designs resells from other makers carry that maker's own warranty, which Baja Designs passes through. Installation errors, wear and tear, misuse, accidents, collisions, modifications and installation labor are not covered, and claims need proof of purchase or product registration. Shipping. The carrier and ship method are set by the size and weight of the carton when the order is placed. Inspect on delivery. Open the carton when it arrives and check every light, bracket, harness and hardware bag against the kit contents before you start the install. Report shipping damage or a missing part right away, before anything is mounted.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Baja Designs
Baja Designs began in San Diego, California in 1992, started by riders with a habit of racing the Baja 1000. Its first product turned pure dirt motorcycles into minimally street-ready dual-sport bikes, and its work tuning race lights for night stages earned its engineers the name The Scientists of Lighting.
From motorcycle HID race lights the company moved into truck and buggy racing, and in 2005 it ran its first forward-projecting LED light bar in the Baja 1000. That race program still feeds the design of every LED pod and bar the company builds.
Today Baja Designs lights trucks, Jeeps, SUVs, vans, UTVs and motorcycles, using its Lighting Zones method: pick the right lens pattern for each job and put it in the right place on the vehicle.
