The Squadron SAE Fog Pocket Light Kit fits Baja Designs LED lights into the factory fog light location, giving this vehicle low, wide light right in front of the bumper. Kits in this line range from SAE fog lights to off-road pods and combinations of both; the lights and lens options for this kit are listed below. Using the factory fog pocket keeps the front end looking stock while the light output changes completely. This kit is Baja Designs part 44-7615 for the 2015-2019 Chevrolet Colorado, Silverado 2500 HD and Silverado 3500 HD and GMC Canyon, Sierra 2500 HD and Sierra 3500 HD. Choose lens color from the options above; each option is its own Baja Designs part number, listed under Specifications.
Anything a kit needs beyond the box, such as a specific factory bumper, OEM fog brackets or a particular wiring version, is listed in that kit's fit notes.
Features
Built for the factory fog location
The brackets are made for this vehicle's fog light openings, so the lights sit in the bumper where fog lights belong.
Low light for bad weather
A bumper-height beam runs beneath dust, fog, rain and snow rather than lighting it up in front of the windshield, which helps you see the road edge in poor conditions.
SAE fog, off-road pods or both
Some kits use Baja Designs SAE fog lights, some use off-road pods, and some pair the two. This product's light types are shown in its options and spec table.
Lens options by lighting zone
Baja Designs matches lens patterns to lighting zones, from dust and fog light through cornering and driving to spot, and the options for this kit are listed above.
Sealed LED housings
Baja Designs lights use sealed housings and hard lenses meant to keep working through water crossings, mud and trail vibration.
Lifetime limited warranty on lights
The lights carry the Baja Designs limited lifetime warranty for recreational use, and brackets and harnesses carry their maker's pass-through warranty.
Fitment & Compatibility
Fit guidance: Fits: 2015-2019 Chevrolet Colorado/Silverado 2500 HD/Silverado 3500 HD & GMC Canyon/Sierra 2500 HD/Sierra 3500 HD, with the qualifiers shown. Check your vehicle against these notes before ordering.
Baja Designs fit notes for this product
| SAE J583 road-legal fog pocket kit |
Specifications
-
Brand: Baja Designs
-
Warranty: Limited lifetime on Baja Designs lights for recreational use (capped at 49,930 hours); brackets, harnesses and switches Baja Designs resells carry their maker's warranty
-
Mount location: Factory fog light location
-
Fitment: Vehicle specific (see Fitment & Compatibility)
-
Road use: Baja Designs lists this light as SAE compliant; the lens is part of that rating and is not user-replaceable
-
Light type: Fog Light
-
Beam pattern: SAE Fog
-
Color temperature: 5000K
-
Brightness: 2,420 lumens per light
-
Water resistance: IP69K
-
Power draw: 29 W per light
-
Current draw: 2.1 A per light
-
Part numbers: 44-7615, 44-7715
Options and part numbers
| Lens Color |
Baja Designs part number |
| Clear |
44-7615 |
| Baja Amber |
44-7715 |
California Proposition 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Installation
The kit mounts in the factory fog light openings using brackets made for this vehicle. How the lights are switched depends on the kit: some connect to the factory fog circuit and others use a toggle or upfitter harness. Aim the lights low with the vehicle parked on level ground. The fit notes below cover the bumper style the kit needs, any wiring choice and any modification.
Baja Designs's installation instructions for this product are linked under Resources. Read them fully before starting.
Resources
Warranty, Shipping & Returns
Warranty. Baja Designs warranties cover defects in design and manufacturing only, and the term depends on the product type. LED light bars and auxiliary lights for recreational use carry a limited lifetime warranty capped at 49,930 hours of operation. Brackets, wiring harnesses and switches that Baja Designs resells from other makers carry that maker's own warranty, which Baja Designs passes through. Installation errors, wear and tear, misuse, accidents, collisions, modifications and installation labor are not covered, and claims need proof of purchase or product registration. Shipping. The carrier and ship method are set by the size and weight of the carton when the order is placed. Inspect on delivery. Open the carton when it arrives and check every light, bracket, harness and hardware bag against the kit contents before you start the install. Report shipping damage or a missing part right away, before anything is mounted.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Baja Designs
Baja Designs began in San Diego, California in 1992, started by riders with a habit of racing the Baja 1000. Its first product turned pure dirt motorcycles into minimally street-ready dual-sport bikes, and its work tuning race lights for night stages earned its engineers the name The Scientists of Lighting.
From motorcycle HID race lights the company moved into truck and buggy racing, and in 2005 it ran its first forward-projecting LED light bar in the Baja 1000. That race program still feeds the design of every LED pod and bar the company builds.
Today Baja Designs lights trucks, Jeeps, SUVs, vans, UTVs and motorcycles, using its Lighting Zones method: pick the right lens pattern for each job and put it in the right place on the vehicle.
