BEDSLIDE D-ring tie-down in use on the BEDTRAX track of a silver slide deck, with a strap over a load of lumber

BEDSLIDE D-Ring Tie-Down Kit, 4-Piece (BSA-D-RINGKIT4)

Brand: BEDSLIDE FREE Shipping Low Stock

$55.00

Free Shipping Across the US
30-Day Return Policy
Secure Checkout

Calculating delivery estimate…

This is the part that turns any stretch of BEDTRAX into a tie-down point. The kit is (4) D-rings and (4) mount blocks, and each one slides straight into the track and locks where you put it. That means the sides, the centre channel and the upper guardrail track are all fair game, so you can put the anchor exactly where the load needs it instead of strapping at an angle to whatever fixed point happens to be nearby. Installation is measured in seconds, not minutes, and the D-rings move as easily as they went in, so the layout changes with the job. Every current BEDSLIDE already ships with (4) D-ring tie-downs. This kit is how you add four more.

What's Included:

(4) D-rings
(4) T-slot mount blocks

Features

Anchors Anywhere on the Track
The mount blocks slide into the BEDTRAX T-slot, so a D-ring can go at the sides, in the centre channel or up on the guardrail track. You put the anchor where the strap wants to pull rather than working around a fixed point.

Installs in Seconds
Each part slides right into the track and tightens by hand. There is no drilling, no hardware to source and nothing to take apart. Adding four anchor points is a job you finish before you have finished loading.

Moves With the Job
Because they are not fixed, the D-rings come out and go back in a different position just as quickly. A layout that suits lumber on Monday can suit toolboxes on Tuesday.

Doubles Your Factory Anchor Points
A current BEDSLIDE ships with (4) D-ring tie-downs as standard. This kit adds four more, which is usually the difference between strapping a load properly and strapping it as well as you can.

Made in the USA
BEDSLIDE builds this in the USA alongside the slides. That matters most for the parts you cannot see: the extrusion tolerances that let the bin slide into a BEDTRAX rail cleanly, and the hardware that has to hold a loaded bin steady over a washboard road.

Fitment & Compatibility

BEDSLIDE track	Fit
BEDTRAX side track	✓ Yes
BEDTRAX centre track	✓ Yes
Upper guardrail track	✓ Yes, where guardrails are fitted
Any current BEDSLIDE deck	✓ Yes, BEDTRAX runs the length of all of them

Fit guidance: This kit fits the BEDTRAX T-slot track, which runs down every current BEDSLIDE deck regardless of series or size, and it also fits the upper guardrail track where guardrails are fitted. There is no size or model to match. If your deck predates BEDTRAX it will not accept these mount blocks.

Specifications

Part Number: BSA-D-RINGKIT4
Type: D-ring tie-down kit
Contents: (4) D-rings and (4) mount blocks
Mounting: Slides into the BEDTRAX or guardrail T-slot track
Mounting Locations: Side track, centre track or upper guardrail track
Brand: BEDSLIDE
Country of Origin: Made in the USA
Warranty: 5 years, extended to lifetime with registration within 30 days
Shipping Weight: 1 lb
UPC: 856341006269

Installation

Type: Slides into the existing T-slot track, no tools required · Time: Seconds per anchor · Tools: None · Difficulty: None

Slide each mount block into the end of the track, position it where the strap needs to pull and tighten it by hand. Check the block is fully seated in the T-slot before loading against it.

Warranty, Shipping & Returns

Warranty. BEDSLIDE covers all of its products with a 5-year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Coverage is for the original owner only and does not transfer if the product is resold. The warranty does not cover misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, deck de-lamination from water, fuel or chemical spills, modifications that alter the design, improper installation, accidents, or lack of maintenance.

Free shipping. This item ships free to the lower 48 states and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect your order on arrival. If anything is damaged or missing, contact us right away and we will make it right.

About BEDSLIDE

BEDSLIDE invented the slide-out truck bed cargo tray. The idea is simple and it has not needed much improving: put the whole bed floor on heavy-duty bearings so it rolls out to you instead of making you climb in after your gear. Contractors, utility fleets, overlanders and anyone who has ever crawled the length of a bed looking for one tool have been buying them for the same reason for decades. Today BEDSLIDE is part of the LEER family under JB Poindexter and Co, which is the largest truck cap and accessory group in North America, and it remains an active NTEA member supplying commercial and work-truck upfitters. Every BEDSLIDE product is made in the USA.

The accessory line exists because the deck is only half the system. BEDTRAX T-slot rails run the length of every current BEDSLIDE, and the bins, trays, guardrails, tie-downs and mounting kits all drop into that same track, so you can add capability years after the slide went in without drilling anything new. Parts are built from aluminum and composite with an all-weather soft surface inside the bins, and they are designed to live outdoors in the same weather the slide does.

Prestige Truck is an authorized BEDSLIDE dealer. Every part we ship is new, in the factory box, and covered by the full BEDSLIDE factory warranty.

BEDSLIDE Specs, Measurements And Accessories

A run through how BEDSLIDE measures its decks and how the accessory range attaches to them. Handy for checking rail lengths and clearances before you add bins or trays.

BEDSLIDE Drawer System Features And Benefits

A longer look at how a loaded BEDSLIDE works day to day, including the cargo management options that the BEDBIN accessories plug into.

Which BEDSLIDE Is Right For You?

BEDSLIDE walks through the whole range, from the 1000 Classic to the 2000 Heavy Duty and the MAX Extension models, and how to pick by what you carry. If you are cross-shopping sizes or capacities, this is the five minutes that settles it.

Frequently Asked Questions

Straight answers on specs, fit and support

Will this fit my BEDSLIDE?

Yes, if your deck has BEDTRAX. The mount blocks slide into the BEDTRAX T-slot track, which runs the length of every current BEDSLIDE deck whatever the series or size, and they also fit the upper guardrail track where guardrails are fitted. There is no size to match.

Where can I mount the D-rings?

Anywhere along the track. BEDSLIDE specifically calls out the side track, the centre track and the upper guardrail track. That is the point of the design: you put the anchor where the strap wants to pull rather than strapping at an angle to a fixed point.

Does my BEDSLIDE not already have D-rings?

It does. Current BEDSLIDE decks ship with (4) D-ring tie-downs included as part of the BEDTRAX cargo management system. This kit adds four more, which is why it exists as a separate part rather than as a required accessory.

How long does it take to fit?

Seconds each. The mount block slides into the end of the track, you position it and tighten by hand. No tools, no drilling, nothing to take apart. They come out just as fast when you want to rearrange them.

Can I leave them on in bad weather?

Yes. BEDSLIDE builds the whole product line to live outdoors in the same weather the slide does, and this part is no exception. What the warranty does not cover is corrosion of the steel frame caused by exposure, so rinsing road salt off in the spring is worth the five minutes.

What does the BEDSLIDE warranty cover on an accessory like this?

Every BEDSLIDE product carries a 5-year warranty, and BEDSLIDE extends it to a lifetime warranty if you register the product within 30 days of purchase. Coverage is for the original owner and does not transfer if you sell the truck or the part. What is not covered is worth knowing up front: misuse, loading past the rated capacity, corrosion of the steel frame from exposure, deck de-lamination caused by water, fuel or chemical spills, modifications that change the design, improper installation, accidents, and neglect. Register it when it arrives, not later.