BEDSLIDE No-Drill Factory Mount Install Kit, Chevrolet Colorado and GMC Canyon 5' and 6' Beds (BSA-GM5871)

This is the no-drill mounting kit for the Chevrolet Colorado and GMC Canyon. BEDSLIDE's patented brackets bolt to the factory tie-down points already in the bed, so the slide anchors to structure GM engineered to take load and nothing new goes through the bed floor. On a mid-size truck where the box is short and every inch of it is spoken for, being able to add a slide and later remove it without leaving holes behind is worth something real at trade-in. The kit is a cab end bracket, two side mount brackets and the hardware pack, and the job is hand tools only. Please read the fitment section closely before ordering: BEDSLIDE's own page carries two different year ranges for this part, and we would rather point that out than let you find out afterwards. The BEDSLIDE is sold separately.

What's Included:

• Hardware pack
• (1) cab end bracket
• (2) side mount brackets
• Installation instructions

Features

No Drilling Into Your Truck Bed
This is the whole point. BEDSLIDE's patented mounting brackets use your truck's existing factory tie-down points to secure the slide, so the bed floor stays exactly as the factory made it. Nothing to seal, nothing to touch up, and nothing that shows when the slide comes out.

Built for One Truck
These brackets are cut for the Chevrolet Colorado and GMC Canyon and nothing else. That is why BEDSLIDE sells a kit per application rather than a universal bracket: the mounting points move between generations and bed lengths, and a bracket that nearly lines up is worse than no bracket at all.

Installs With Hand Tools
BEDSLIDE lists the job as easy installation with hand tools. There is no welding, no cutting and no drilling. The brackets go to the factory mounting points and the slide goes on top of them.

Safe and Secure Mounting Points
Using the truck's own tie-down points means the slide is anchored to structure the manufacturer already engineered to take load, rather than to sheet metal you have made a hole in.

Matched to Specific BEDSLIDE Sizes
This kit is listed as working with BEDSLIDE parts 10-5839-CLS, 10-5839-CLB, 10-7142-CLS and 10-7142-CLB. The no-drill kits fit the 1000 lb models, which means the S model and the CLASSIC in Silver and Black Edition, and they are not compatible with 2017 and previous CL parts.

Fitment & Compatibility

Specifications

• Part Number: BSA-GM5871
• Type: No-drill factory mount install kit
• Vehicle: Chevrolet Colorado and GMC Canyon
• Years: 2004 to 2019 for the 5' bed, 2015 to 2019 for the 6' bed
• Bed Lengths: 5' and 6'
• Mounts To: Factory tie-down points
• Contents: Hardware pack, (1) cab end bracket and (2) side mount brackets
• Compatible BEDSLIDE Models: 1000 lb models only: the S model and the CLASSIC in Silver and Black Edition
• Listed BEDSLIDE Part Numbers: 10-5839-CLS, 10-5839-CLB, 10-7142-CLS, 10-7142-CLB
• Not Compatible With: 2017 and previous CL parts
• BEDSLIDE Serial Number Requirement: After 102951
• BEDSLIDE Included: No
• Brand: BEDSLIDE
• Country of Origin: Made in the USA
• Warranty: 5 years, extended to lifetime with registration within 30 days
• Shipping Weight: 18 lb
• UPC: 810059880290

Installation

Type: No-drill, brackets mount to the factory tie-down points  ·  Time: About 1 hour  ·  Tools: Basic hand tools and a socket set  ·  Difficulty: Easy, DIY

Fit the cab end bracket and the two side mount brackets to the factory tie-down points using the supplied hardware pack, then set the BEDSLIDE down onto them. Nothing is drilled and nothing goes through the bed floor. Roll the deck fully out and back before loading it, and re-check every fastener after the first few loaded trips.

Watch the installation walkthrough:

Warranty, Shipping & Returns

Warranty. BEDSLIDE covers all of its products with a 5-year warranty, extended to a LIFETIME warranty when the product is registered within 30 days of purchase. Coverage is for the original owner only and does not transfer if the product is resold. The warranty does not cover misuse, exceeding the rated capacity, corrosion of the steel frame caused by exposure, deck de-lamination from water, fuel or chemical spills, modifications that alter the design, improper installation, accidents, or lack of maintenance.

Free shipping. This item ships free to the lower 48 states and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect your order on arrival. If anything is damaged or missing, contact us right away and we will make it right.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About BEDSLIDE

BEDSLIDE invented the slide-out truck bed cargo tray. The idea is simple and it has not needed much improving: put the whole bed floor on heavy-duty bearings so it rolls out to you instead of making you climb in after your gear. Contractors, utility fleets, overlanders and anyone who has ever crawled the length of a bed looking for one tool have been buying them for the same reason for decades. Today BEDSLIDE is part of the LEER family under JB Poindexter and Co, which is the largest truck cap and accessory group in North America, and it remains an active NTEA member supplying commercial and work-truck upfitters. Every BEDSLIDE product is made in the USA.

The accessory line exists because the deck is only half the system. BEDTRAX T-slot rails run the length of every current BEDSLIDE, and the bins, trays, guardrails, tie-downs and mounting kits all drop into that same track, so you can add capability years after the slide went in without drilling anything new. Parts are built from aluminum and composite with an all-weather soft surface inside the bins, and they are designed to live outdoors in the same weather the slide does.

Prestige Truck is an authorized BEDSLIDE dealer. Every part we ship is new, in the factory box, and covered by the full BEDSLIDE factory warranty.