Borla ATAK Mid-Section Exhaust System for 2021-2026 Ford F-150 Tremor & Black Appearance Package Plus

The ATAK Mid-Section Exhaust System swaps the middle of the factory exhaust for an ATAK muffler assembly, giving the truck Borla's most aggressive note with no drone in the cab. Because it works with the factory tail pipes, the rear of the truck can keep its stock look or take Borla tail pipes later. It is Borla part 60732, engineered for the 2021-2026 Ford F-150.

Tail pipes and tips are not part of this assembly; it pairs with the factory tail pipes or with Borla tail pipes or tips sold separately, and installation is not included.

Features

The heart of the exhaust
A Mid-Section replaces the mufflers and center piping, where most of the exhaust sound is shaped, and hands off to the tail pipes behind it.

Works with factory tail pipes
Each assembly connects to the truck's original tail pipes, or to Borla tail pipes sold separately if you want a new look at the back.

Most aggressive Borla sound
ATAK is the highest sound level Borla makes, a full and aggressive note shaped by tuned solid and perforated muffler cores.

No drone in the cab
Borla states that every ATAK Mid-Section in this group stays free of drone inside the vehicle.

Mandrel-bent T-304 stainless steel
Mandrel bends keep the tube round through each curve, and T-304 austenitic stainless steel stands up to heat and road salt better than 409 or aluminized steel.

Covered by the Million-Mile Warranty
Material and workmanship defects are covered for the original buyer on the original truck; valves, actuators and finishes carry a one-year term.

Fitment & Compatibility

Borla fit notes for this part

Specifications

• Brand: Borla
• Sound level: ATAK
• Warranty: Borla Million-Mile Warranty (one year on carbon fiber, black coatings, tip finishes and moving parts)
• Material: T-304 stainless steel
• System Type: Mid-Section / muffler assembly
• Tube Bends: Mandrel-bent
• Tail Pipes: Not included; reuses factory tail pipes or accepts Borla tail pipes
• Pipe Diameter: Single 3" Inlet Dual 3" Outlet
• Product weight: 19 lb
• Part number: 60732

California Proposition 65

WARNING: This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing or thermal cutting can expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Installation

Type: Mid-Section exhaust assembly  ·  Install: vehicle-specific; method varies by application  ·  Tools: listed on the Borla install sheet

This assembly replaces the factory mufflers and center piping and connects to the tail pipes behind it. Read the fit notes below and the Borla install sheet for the steps and any compatible tail pipes for this truck.

Borla's installation instructions for this part number are linked under Resources. Read them fully before starting.

Resources

• Borla ATAK Mid-Section Exhaust System installation instructions (PDF), Borla's step-by-step guide, which covers part 60732.

Warranty, Shipping & Returns

Warranty. Borla covers its products under the Million-Mile Warranty, which protects the original purchaser of record, on the vehicle the part was first installed on, against defects in materials or workmanship for a million miles. Carbon fiber, black coatings, tip finishes and moving parts such as valves and actuators carry a one-year term, and appearance blemishes from weather, road hazards, lack of maintenance or temperature extremes are not covered. When Borla's inspection confirms a defect, Borla repairs or replaces the part at its option. The warranty does not pay for removal or reinstallation, does not apply to parts damaged by accident, abuse, misuse, misapplication or modification, and does not cover sound level, because sound is a matter of taste. Shipping. The carrier and ship method are set by the size and weight of the carton when the order is placed; long exhaust systems ship in oversize cartons. Inspect on delivery. When the carton arrives, open it and check every pipe, muffler, clamp and hanger against the parts list before you start the install, and report any shipping damage right away with photos.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About Borla