The S-Type Cat-Back Exhaust System gives the exhaust behind the catalytic converters Borla's S-Type voice, the classic Borla tone: aggressive under throttle and refined at cruise. T-304 stainless steel keeps corrosion and heat from shortening the life of the system. Order Borla part 141034 for the 2025-2026 Nissan Murano.
Installation is not included, and any extension pipe, tip or other optional Borla part called out in the fit notes is sold separately.
Features
Borla's classic middle sound level
S-Type is a little tamer than ATAK and clearly bolder than Touring. It turns aggressive when you accelerate and returns to a refined tone at cruising speed.
Replaces piping behind the converters
The system starts downstream of the catalytic converters, so the factory converters remain installed and the change is made in the pipes and mufflers that follow them.
Muffler tuning matched to the vehicle
Borla develops each system on the vehicle it fits, adjusting muffler body shape, core layout and routing so the S-Type character works with that engine's natural sound.
Corrosion-resistant T-304 stainless
T-304 austenitic stainless steel carries more chromium and nickel than 409 or aluminized steel, which helps it shrug off road salt, moisture and heat cycles.
Million-Mile Warranty coverage
Borla warrants the system against material and workmanship defects for the original buyer on the original vehicle, with tip finishes and moving parts on a one-year term.
Fitment & Compatibility
Fit guidance: Fits: 2025-2026 Nissan Murano, with the engine, cab, bed and trim qualifiers shown. Check your vehicle against these notes before ordering.
Qualifier: 2.0L turbo 4-cyl; AWD; automatic
Borla fit notes for this part
| Fits the 2.0L turbo Murano. |
Specifications
-
Brand: Borla
-
Sound level: S-Type
-
Warranty: Borla Million-Mile Warranty (one year on carbon fiber, black coatings, tip finishes and moving parts)
-
Material: T-304 stainless steel
-
System Type: Cat-Back
-
Pipe Diameter: 2.5" Into Dual 2.25"
-
Tip Size: 2.38"
-
Tip Exit: Single Split Rear Exit
-
Product weight: 30.5 lb
-
Part number: 141034
California Proposition 65
WARNING: This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing or thermal cutting can expose you to chemicals including chromium, nickel, cobalt, arsenic, cadmium and lead, which are known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Installation
Type: Cat-Back exhaust system · Install: vehicle-specific; method varies by application · Tools: listed on the Borla install sheet
This system replaces the factory exhaust from the catalytic converters rearward and mounts at the vehicle's existing hanger locations. Follow the fit notes below and the Borla install sheet for this application.
Borla's installation instructions for this part number are linked under Resources. Read them fully before starting.
Resources
Warranty, Shipping & Returns
Warranty. Borla covers its products under the Million-Mile Warranty, which protects the original purchaser of record, on the vehicle the part was first installed on, against defects in materials or workmanship for a million miles. Carbon fiber, black coatings, tip finishes and moving parts such as valves and actuators carry a one-year term, and appearance blemishes from weather, road hazards, lack of maintenance or temperature extremes are not covered. When Borla's inspection confirms a defect, Borla repairs or replaces the part at its option. The warranty does not pay for removal or reinstallation, does not apply to parts damaged by accident, abuse, misuse, misapplication or modification, and does not cover sound level, because sound is a matter of taste. Shipping. The carrier and ship method are set by the size and weight of the carton when the order is placed; long exhaust systems ship in oversize cartons. Inspect on delivery. When the carton arrives, open it and check every pipe, muffler, clamp and hanger against the parts list before you start the install, and report any shipping damage right away with photos.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Borla
Borla began in 1978 building stainless exhaust systems for concours Rolls-Royce and Ferrari restorations, and the company has grown into a leading name in stainless performance exhaust for cars and vehicles.
Each Borla system starts as a clean-sheet design for one vehicle. Engineers at the research and development center in Oxnard, California shape the muffler bodies, internal cores and flow paths around that platform's own mechanical and acoustic traits, then offer the result in a choice of Touring, S-Type or ATAK sound.
Production happens at a 100-acre plant in Johnson City, Tennessee, where raw stainless steel is cut, bent, welded and shipped. Borla also supplies factory-installed accessory exhaust to automakers such as GM, Ford and Toyota.
