This Go Rhino Dominator Xtreme D2 listing covers the 2007-2018 Jeep Wrangler. The step pads are removable, so they can be painted to match or contrast with the vehicle. It is finished in textured black under Go Rhino part number D224505T.
What's Included:
- Driver and passenger side Dominator Xtreme D2 side steps with step pads
- Dominator Xtreme mounting bracket kit with hardware for this application
- Go Rhino installation guide
Tools are not included; the guide for your part number lists them, and a few applications also call for a drill.
Features
Drop Steps Below Each Door
Welded hoops drop down from the main bar under the doors, bringing the step closer to the ground for an easier climb into a lifted vehicle or tall SUV.
4" Galvanized Hex-Tread Pads
Each hoop carries a 4" wide galvanized steel step pad stamped with a hex tread pattern for grip in wet or muddy weather.
Removable, Paintable Pads
The step pads unbolt from the hoops, so they can be painted to match the vehicle or replaced on their own.
One-Piece Steel Channel Bar
The main bar is a single piece of shaped steel channel, giving a continuous OE-style line along the cab.
Zinc Plated, Then Powder Coated
Zinc plating under a textured black powder coat gives the steel two layers of protection against rust.
Bolts to the Rocker Panel
A Dominator Xtreme mount kit and install guide come with every pair, and most applications use existing holes in the rocker panel.
Fitment & Compatibility
Fit guidance: Fits the 2007-2018 Jeep Wrangler, with the cab and equipment notes shown in the table.
Cab and equipment: JK, 4-Door
Specifications
-
Brand: Go Rhino
-
Series: Dominator Xtreme D2
-
Step type: Hoop steps on a one-piece main bar
-
Step pads: 4" wide galvanized steel, hex-stamped tread, removable and paintable
-
Length: Cab length
-
Material: Mild steel, zinc plated
-
Mounting: Rocker panel, Dominator Xtreme mount kit
-
Warranty: Limited lifetime structural, 5 years on finish
-
Mount Location: Mounts to Rocker Panel
-
Finish: Textured Black
-
Part number: D224505T
Installation
Type: Bolt-on · Mount: rocker panel, Dominator Xtreme mount kit · Drilling: none on most applications; some call for drilling or enlarging holes (the guide for each part number says)
The Go Rhino guides for this part number, linked below, cover the bracket positions, hardware, tools and any drilling this vehicle needs. Fit the brackets, hang the steps on them, then align and tighten.
Resources
Warranty, Shipping & Returns
Warranty. Go Rhino's limited lifetime structural warranty covers manufacturing defects in materials or workmanship for as long as the product lasts, provided it was installed per Go Rhino's instructions. A limited 5-year finish warranty, for the original owner, covers red rust, peeling, flaking and cracking from the date of purchase. Go Rhino may ask for proof of purchase and photos of the defect, repairs or replaces a covered part at its discretion, and needs an RGA number on every warranty return; shipping on a finish claim is the owner's cost.
Shipping. Ships by ground carrier. The steps travel in a long carton, and the steps and the Dominator mounting bracket kit may arrive as separate boxes.
Inspect on delivery. Open every carton when it arrives and check both steps, the bracket kit and the hardware against the parts list in the Go Rhino guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Go Rhino
Go Rhino makes exterior accessories for pickups, Jeeps and SUVs. Along the sides of the vehicle the range covers running boards in the RB10, RB20 and RB30 lines and their Slim versions, VoltStep electric running boards (power boards), nerf bars and side steps such as the 1000 Series, 4000 Series and O.E. Xtreme, V-Series V3 steps, and the Dominator steps, drop steps and DSS sliders, along with frame-mounted rock sliders. At the front, Go Rhino builds the Charger RC2 and RC4 LR bull bars, the 3000 Series grille guard and 3100 Series StepGuard, and front bumpers including the BR11, Element, Trailline and Rockline.
Further back come rear bumpers such as the BR20.5 and Trailline, sport bars and bed bars, stake pocket bed rails, XRS bed racks and cross bars, and the CEROS roof rack, plus light mounts for the hood, windshield and cowl, jack mounts and a spare tire relocation kit for Jeeps. Many Go Rhino products carry a limited lifetime structural warranty together with a 5-year finish warranty; other lines are covered for 5 years on black finishes and for the life of the product on polished stainless, and the frame-mounted sliders carry a 1-year warranty. Go Rhino is based in Brea, California.
