Go Rhino Dominator Xtreme DT side steps are a hybrid of side step and rock slider, giving more rocker protection than a typical running board and easier cab access than a typical slider. Main oval tubes carry an outer rub rail that doubles as a step, with hex-patterned punch-through step pads, while lower rails guard the rockers. The mild tubular steel is finished in textured black powder coat, and most versions mount to the rocker panel, with frame-mount versions on select vehicles.
What's Included:
- Driver and passenger side Dominator Xtreme DT side steps
- Dominator Xtreme mounting bracket kit with hardware for this application (frame-mount kit on frame-mount versions)
- Go Rhino installation guide
Tools are not included. Frame-mount versions and some rocker-mount applications also need a drill; the guide for your part number lists the tools.
Features
Step and Slider in One
The DT is built to work as both a side step and a rock slider, with more rocker protection than a running board and easier entry than a dedicated slider.
Outer Rail Doubles as a Step
An outer rub rail runs outboard of the main tubes and carries hex-patterned, punch-through step pads for grip.
Lower Rails Guard the Rockers
Lower rub rails run along the rocker panels to take impacts and abrasion on rocky trails.
Tri-Tube Supported Rub Bar
The full-length rub bar is braced with a tri-tube support design for added strength.
Removable, Paintable Steps
The 2" wide stepping surfaces can be removed and painted to suit the build.
Textured Black Powder Coat
The mild tubular steel is coated in a textured black finish made to resist rust and stand up to bumps on the trail.
Fitment & Compatibility
Fit guidance: Go Rhino builds each Dominator Xtreme DT kit for specific vehicles. Choose your vehicle to see its part numbers, finish options and fit notes.
Specifications
-
Brand: Go Rhino
-
Series: Dominator Xtreme DT
-
Type: Hybrid side step and rock slider
-
Stepping surfaces: 2" wide, removable and paintable, hex-pattern punch-through pads
-
Length: Cab length
-
Material: Mild tubular steel
-
Mounting: Rocker panel (frame mount on select applications)
-
Warranty: Limited lifetime structural, 5 years on finish
Installation
Type: Bolt-on · Mount: rocker panel on most applications, frame on select ones · Drilling: frame-mount versions require it; most rocker-mount applications do not (the guide for each part number says)
Rocker-mount versions use a Dominator Xtreme bracket kit that bolts to the rocker panel, usually at factory threaded holes, and the steps attach to the brackets with nut-plates set inside the bar. Frame-mount versions bolt to the frame rail instead and require drilling into the frame at marked points. The guide for each part number lists the exact steps and tools, and Go Rhino recommends re-tightening all hardware every six months.
Warranty, Shipping & Returns
Warranty. Go Rhino's limited lifetime structural warranty covers manufacturing defects in materials or workmanship for as long as the product lasts, provided it was installed per Go Rhino's instructions. A limited 5-year finish warranty, for the original owner, covers red rust, peeling, flaking and cracking from the date of purchase. Go Rhino may ask for proof of purchase and photos of the defect, repairs or replaces a covered part at its discretion, and needs an RGA number on every warranty return; shipping on a finish claim is the owner's cost.
Shipping. Ships by ground carrier. The steps travel in a long carton, and the steps and the Dominator mounting bracket kit may arrive as separate boxes.
Inspect on delivery. Open every carton when it arrives and check both steps, the bracket kit and the hardware against the parts list in the Go Rhino guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Go Rhino
Go Rhino makes exterior accessories for pickups, Jeeps and SUVs. Along the sides of the vehicle the range covers running boards in the RB10, RB20 and RB30 lines and their Slim versions, VoltStep electric running boards (power boards), nerf bars and side steps such as the 1000 Series, 4000 Series and O.E. Xtreme, V-Series V3 steps, and the Dominator steps, drop steps and DSS sliders, along with frame-mounted rock sliders. At the front, Go Rhino builds the Charger RC2 and RC4 LR bull bars, the 3000 Series grille guard and 3100 Series StepGuard, and front bumpers including the BR11, Element, Trailline and Rockline.
Further back come rear bumpers such as the BR20.5 and Trailline, sport bars and bed bars, stake pocket bed rails, XRS bed racks and cross bars, and the CEROS roof rack, plus light mounts for the hood, windshield and cowl, jack mounts and a spare tire relocation kit for Jeeps. Many Go Rhino products carry a limited lifetime structural warranty together with a 5-year finish warranty; other lines are covered for 5 years on black finishes and for the life of the product on polished stainless, and the frame-mounted sliders carry a 1-year warranty. Go Rhino is based in Brea, California.
