The Go Rhino El Gato Jack Mount carries the El Gato hydraulic jack (part XG-RJ50010B) upright on the outside of a Jeep Wrangler or Gladiator. It is made from mild steel with a black textured powder coat, and a three-point mounting system bolts to the factory lower rocker and upper cowl mounting points to reduce rattling. The mount works only with the El Gato hydraulic jack.
What's Included:
- El Gato jack mount base and case for the Jeep named in the title
- Mounting hardware with black powder coating
The El Gato hydraulic jack is sold separately, and other jacks do not fit this mount.
Features
Made for the El Gato Jack
The mount is designed to work only with the El Gato hydraulic jack, part XG-RJ50010B.
Vertical Mounting Saves Space
The jack rides upright on the outside of the Jeep, out of the way but close at hand.
Three-Point Anti-Rattle Mounting
Three mounting points at the lower rocker and upper cowl hold the mount steady to cut rattling.
Textured Black Mild Steel
The mild steel mount and its hardware are finished in black textured powder coat to resist corrosion.
Bolts to Factory Points
Installation uses the factory rocker and cowl mounting points.
Fitment & Compatibility
Jeep
| Years |
Model |
Notes |
| 2021-2026 |
Gladiator |
— |
| 2007-2018 |
Wrangler |
JK |
| 2018-2026 |
Wrangler |
JL |
Fit guidance: Go Rhino builds each El Gato kit for specific vehicles. Choose your vehicle to see its part numbers, finish options and fit notes.
Specifications
-
Brand: Go Rhino
-
Series: El Gato
-
Jack: El Gato hydraulic jack, part XG-RJ50010B only (not included)
-
Material: Mild steel
-
Mounting: Three-point, factory rocker and cowl mounting points
-
Warranty: 5-year finish
Installation
Type: Bolt-on jack mount · Mount: factory lower rocker and upper cowl points · Time: about 1 hour
The mount bolts on at the Jeep's factory lower rocker and upper cowl mounting points with the included hardware. Go Rhino's guides list Torx and hex bit sockets with standard wrenches, and put the job at about an hour.
Warranty, Shipping & Returns
Warranty. Go Rhino covers the finish for 5 years from the date of purchase: the original owner is covered for red rust, peeling, flaking and cracking when the product is installed per the provided instructions. If the finish fails from a defect, Go Rhino repairs or replaces the product at its discretion; Go Rhino may ask for proof of purchase and damage photos, and shipping charges on a finish claim are the owner's responsibility.
Shipping. Ships by ground carrier, with the carrier and service chosen by the size and weight of the carton when the order ships.
Inspect on delivery. Open the carton when it arrives and check every part and the hardware against the parts list in the Go Rhino guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Go Rhino
Go Rhino makes exterior accessories for pickups, Jeeps and SUVs. Along the sides of the vehicle the range covers running boards in the RB10, RB20 and RB30 lines and their Slim versions, VoltStep electric running boards (power boards), nerf bars and side steps such as the 1000 Series, 4000 Series and O.E. Xtreme, V-Series V3 steps, and the Dominator steps, drop steps and DSS sliders, along with frame-mounted rock sliders. At the front, Go Rhino builds the Charger RC2 and RC4 LR bull bars, the 3000 Series grille guard and 3100 Series StepGuard, and front bumpers including the BR11, Element, Trailline and Rockline.
Further back come rear bumpers such as the BR20.5 and Trailline, sport bars and bed bars, stake pocket bed rails, XRS bed racks and cross bars, and the CEROS roof rack, plus light mounts for the hood, windshield and cowl, jack mounts and a spare tire relocation kit for Jeeps. Many Go Rhino products carry a limited lifetime structural warranty together with a 5-year finish warranty; other lines are covered for 5 years on black finishes and for the life of the product on polished stainless, and the frame-mounted sliders carry a 1-year warranty. Go Rhino is based in Brea, California.
