This Go Rhino jack mount listing covers the 2018-2026 Jeep Wrangler and 2020-2026 Jeep Gladiator. The mount sits on the driver side and holds the jack upright, out of the way but close at hand. It comes in textured black under Go Rhino part number 701001T.
What's Included:
- Exterior jack mount in the style named in the listing: clamp style or bolt-on
- GEOMET-coated mounting hardware
The jack is sold separately.
Features
Vertical Driver-Side Mount
The mount holds the jack upright on the driver side, saving space and keeping it within reach.
Three-Point Anti-Rattle Mounting
Three mounting points at the lower rocker and upper cowl hold the mount steady to reduce rattling on the move.
Fits Most Off-Road Jacks
The mount works with most high-clearance off-road jacks and farm jacks.
Clamp or Bolt-On Styles
Clamp-style versions clamp the jack to the mount; the bolt-on version bolts the jack in place.
Steel With GEOMET Hardware
Mild steel in textured black powder coat, with GEOMET-coated hardware to resist corrosion.
Bolt-On, No Drilling
The mount uses factory mounting points, so it installs without drilling.
Fitment & Compatibility
Jeep
| Years |
Model |
Notes |
| 2020-2026 |
Gladiator |
Excludes Mojave |
| 2018-2026 |
Wrangler |
JL, Excludes 4xe |
Fit guidance: Fits the 2018-2026 Jeep Wrangler and 2020-2026 Jeep Gladiator, with the cab and equipment notes shown in the table.
Not for the 4xe (2018-2026 Jeep Wrangler) or the Mojave (2020-2026 Jeep Gladiator).
Specifications
-
Brand: Go Rhino
-
Series: Exterior Jack Mount
-
Material: Mild steel
-
Location: Driver side
-
Jack styles: Most high-clearance off-road and farm jacks (not included)
-
Mounting: Three-point, factory rocker and cowl mounting points
-
Warranty: 5-year limited (black finish)
-
Mount Type: Bolt-On
-
Finish: Textured Black
-
Part number: 701001T
Installation
Type: Bolt-on jack mount · Mount: factory lower rocker (pinch weld) and upper cowl points, driver side · Drilling: none · Time: about 1 hour
The Go Rhino guide for this part number, linked below, shows the mounting points and how the jack secures in this style of mount.
Resources
Warranty, Shipping & Returns
Warranty. Go Rhino covers this product against defects in material and workmanship for 5 years on black finishes, counted from the date of purchase. A claim needs the original invoice along with photos of the item. Coverage is for the cost of the product only, so removal, installation and shipping are not included, and exposed welds are not covered. Coverage ends when a product has been altered, misused, mishandled or neglected, cared for or applied improperly, or damaged by a faulty installation, and it provides a one-time replacement on workmanship when those conditions are met. Owners are expected to clean the product regularly and protect the finish with a nonabrasive polish that suits it.
Shipping. Ships by ground carrier, with the carrier and service chosen by the size and weight of the carton when the order ships.
Inspect on delivery. Open the carton when it arrives and check every part and the hardware against the parts list in the Go Rhino guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Go Rhino
Go Rhino makes exterior accessories for pickups, Jeeps and SUVs. Along the sides of the vehicle the range covers running boards in the RB10, RB20 and RB30 lines and their Slim versions, VoltStep electric running boards (power boards), nerf bars and side steps such as the 1000 Series, 4000 Series and O.E. Xtreme, V-Series V3 steps, and the Dominator steps, drop steps and DSS sliders, along with frame-mounted rock sliders. At the front, Go Rhino builds the Charger RC2 and RC4 LR bull bars, the 3000 Series grille guard and 3100 Series StepGuard, and front bumpers including the BR11, Element, Trailline and Rockline.
Further back come rear bumpers such as the BR20.5 and Trailline, sport bars and bed bars, stake pocket bed rails, XRS bed racks and cross bars, and the CEROS roof rack, plus light mounts for the hood, windshield and cowl, jack mounts and a spare tire relocation kit for Jeeps. Many Go Rhino products carry a limited lifetime structural warranty together with a 5-year finish warranty; other lines are covered for 5 years on black finishes and for the life of the product on polished stainless, and the frame-mounted sliders carry a 1-year warranty. Go Rhino is based in Brea, California.
