This Go Rhino cowl light mount listing covers the 2018-2026 Jeep Wrangler and 2020-2026 Jeep Gladiator. Each of the two brackets holds a spread pair of 3" x 3" cube lights, for four lights in all. It comes in standard under Go Rhino part number 730231T.
What's Included:
- Pair of cowl light mount brackets with light brackets
- Hardware and rubber gaskets
The cube lights are not included.
Features
Four Cube Light Positions
Each bracket holds two 3" x 3" cube lights spread apart, for four lights across the cowl. Lights are sold separately.
Bolts to Existing Cowl Mounts
The brackets bolt to the Jeep's existing cowl mounting points, so there is no cutting or drilling.
Brackets Sit Low
The brackets sit low at the base of the windshield for a clean look.
Zinc Plus Textured Black
The brackets are zinc plated, then top coated in Go Rhino's black textured powder coat.
Rubber Gaskets Included
Supplied rubber gaskets go between the brackets and the cowl.
Fitment & Compatibility
Jeep
| Years |
Model |
Notes |
| 2020-2026 |
Gladiator |
Excludes Mojave |
| 2018-2026 |
Wrangler |
JL |
Fit guidance: Fits the 2018-2026 Jeep Wrangler and 2020-2026 Jeep Gladiator, with the cab and equipment notes shown in the table.
Not for the Mojave (2020-2026 Jeep Gladiator).
Specifications
-
Brand: Go Rhino
-
Series: Windshield Cowl
-
Light size: 3" x 3" cube lights, two per bracket (not included)
-
Contents: Pair of mounting brackets with hardware
-
Drilling: None
-
Warranty: 5-year limited
-
Light Type: Spread Pair Of 3" Cube Lights
-
Finish: Standard
-
Part number: 730231T
Installation
Type: Bolt-on cowl light brackets · Mount: existing windshield cowl mounting points · Drilling: none · Time: about 1 hour
The Go Rhino guide for this part number, linked below, shows each step from the driver side across.
Resources
Warranty, Shipping & Returns
Warranty. Go Rhino warrants black and chrome finished products for 5 years from the date of shipment to match its published specifications and to be free of material defects in workmanship; the finish coverage applies to peeling, flaking or cracking. A claim needs a copy of the original invoice, a photo of the issue and a photo showing the vehicle it is mounted on, and every return needs an approved RGA number marked on the outside of the package. Coverage is for the cost of the product only, so removal, installation, third-party modifications and shipping are not included, and exposed welds are not covered. Coverage ends when a product has been altered, misused, mishandled or neglected, cared for or applied improperly, or damaged by a faulty installation.
Shipping. Ships by ground carrier, with the carrier and service chosen by the size and weight of the carton when the order ships.
Inspect on delivery. Open the carton when it arrives and check every part and the hardware against the parts list in the Go Rhino guide before you start. Note any visible carton damage on the delivery receipt and photograph it, because damage reported later is much harder to claim.
Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.
About Go Rhino
Go Rhino makes exterior accessories for pickups, Jeeps and SUVs. Along the sides of the vehicle the range covers running boards in the RB10, RB20 and RB30 lines and their Slim versions, VoltStep electric running boards (power boards), nerf bars and side steps such as the 1000 Series, 4000 Series and O.E. Xtreme, V-Series V3 steps, and the Dominator steps, drop steps and DSS sliders, along with frame-mounted rock sliders. At the front, Go Rhino builds the Charger RC2 and RC4 LR bull bars, the 3000 Series grille guard and 3100 Series StepGuard, and front bumpers including the BR11, Element, Trailline and Rockline.
Further back come rear bumpers such as the BR20.5 and Trailline, sport bars and bed bars, stake pocket bed rails, XRS bed racks and cross bars, and the CEROS roof rack, plus light mounts for the hood, windshield and cowl, jack mounts and a spare tire relocation kit for Jeeps. Many Go Rhino products carry a limited lifetime structural warranty together with a 5-year finish warranty; other lines are covered for 5 years on black finishes and for the life of the product on polished stainless, and the frame-mounted sliders carry a 1-year warranty. Go Rhino is based in Brea, California.
